Skip to main content

Research Repository

Advanced Search

Structural behaviour of timber frame closed panels for specification in the United Kingdom. (2014)
Presentation / Conference Contribution
Menendez, J., Leitch, K., & Hairstans, R. (2014, May). Structural behaviour of timber frame closed panels for specification in the United Kingdom. Presented at COST Action FP1004 Experimental Research with Timber

A series of closed timber frame wall panels were tested for racking capacity in
accordance with the standard BS EN594:2011 [1]. The test program was designed to
investigate the wall diaphragm performance of conventional and evolved (dual-frame)
pa... Read More about Structural behaviour of timber frame closed panels for specification in the United Kingdom..

Design and Acoustic Performance of Building Constructions for Multi-Storey Housing: Compendium. (2014)
Book Chapter
Fausti, P., García, T. C., Ingelaere, B., Machimbarrena, M., Monteiro, C. R. A., Santoni, A., Secchi, S., & Smith, S. (2014). Design and Acoustic Performance of Building Constructions for Multi-Storey Housing: Compendium. In B. Rasmussen, & M. Machimbarrena (Eds.), COST Action TU0901 – Building acoustics throughout Europe. Volume 1: Towards a common framework in building acoustics throughout Europe (213-244). COST European Cooperation in Science and Technology

This chapter provides an overview of the range of construction types
found across Europe to meet various sound insulation requirements for separating (party) walls and floors. The typical construction system, material properties and key influencing... Read More about Design and Acoustic Performance of Building Constructions for Multi-Storey Housing: Compendium..

Common Errors and Good Practice in Design and Workmanship. (2014)
Book Chapter
García, T. C., Fausti, P., Beentjes, W., Clarke, E., & Steel, C. (2014). Common Errors and Good Practice in Design and Workmanship. In B. Rasmusen, & M. Machimbarrena (Eds.), COST Action TU0901: Building acoustics throughout Europe Volume 1: Towards a common framework in building acoustics throughout Europe (180-257). COST European Cooperation in Science and Technology

A great variety of design and construction techniques have been
described from around the European Union and beyond. COST action TU0901 has provided a unique opportunity to exchange practical experience of the design, construction and in-situ perfor... Read More about Common Errors and Good Practice in Design and Workmanship..

Investigation Of Physical And Chemical Characteristics Of Masonry Stones And Bricks During Building Cleaning Part2 Chemical Testing (2014)
Journal Article
Zhang, B., Reza, H., Gu, S., & Gupta, N. (2014). Investigation Of Physical And Chemical Characteristics Of Masonry Stones And Bricks During Building Cleaning Part2 Chemical Testing. Journal of Physical Science and Application, 4(4), 223-235. https://doi.org/10.17265/2159-5348/2014.04.002

This series of study focused on analysing and assessing the changes of the physical and chemical characteristics of the surfaces of the masonrystones and bricks during the sandblasting cleaning process by conducting various physical and chemical test... Read More about Investigation Of Physical And Chemical Characteristics Of Masonry Stones And Bricks During Building Cleaning Part2 Chemical Testing.

Investigation Of Physical And Chemical Characteristics Of Masonry Stones And Bricks Part 1 Physical Testing (2014)
Journal Article
Zhang, B., Reza, H., Gu, S., & Gupta, N. (2014). Investigation Of Physical And Chemical Characteristics Of Masonry Stones And Bricks Part 1 Physical Testing. Journal of Physical Science and Application, 4(4), 207-222. https://doi.org/10.17265/2159-5348/2014.04.001

This series of study focused on analysing and assessing the changes of the physical and chemical characteristics of the surfaces of the masonrystones and bricks during the sandblasting cleaning process by conducting various physical and chemical test... Read More about Investigation Of Physical And Chemical Characteristics Of Masonry Stones And Bricks Part 1 Physical Testing.

Stiffness changes during low temperature thermal treatment of Scots pine, assessed by acoustic NDT (2014)
Presentation / Conference Contribution
Ridley-Ellis, D., Popescu, C.-M., Keating, B. A., Popescu, M.-C., & Hill, C. A. S. (2014, March). Stiffness changes during low temperature thermal treatment of Scots pine, assessed by acoustic NDT

The change, over time, in density, longitudinal modulus of elasticity, shear modulus and chemical structure of Scots pine (Pinus sylvestris) under thermal treatment (110, 120 and 140 C) was evaluated. The determinations of the specific changes were c... Read More about Stiffness changes during low temperature thermal treatment of Scots pine, assessed by acoustic NDT.

Adding value to the Forest through research. (2014)
Presentation / Conference Contribution
Ridley-Ellis, D. (2014, March). Adding value to the Forest through research. Presented at Wood Products Innovation Gateway closing event

Presentation at the closing event of the "Wood Products Innovation Gateway"

Identification Of Performance Measures For Municipal Construction Projects In Saudi Arabia (2014)
Journal Article
Alsulamy, S., Gupta, N., Sloan, B., & Wamuziri, S. (2014). Identification Of Performance Measures For Municipal Construction Projects In Saudi Arabia. International Journal of Civil and Environmental Engineering, 36(1), 1192-1201

Performance measures are a key management tool that determine success or failure of performance whether at organizational or project level. In municipalities, performance measures are being utilised to attain stakeholders' and citizens' expectations... Read More about Identification Of Performance Measures For Municipal Construction Projects In Saudi Arabia.

Ranking of the main criteria for selection procedures on major construction projects in Libya using the Delphi method. (2013)
Journal Article
Elsayah, O., Gupta, N. K., & Zhang, B. (2013). Ranking of the main criteria for selection procedures on major construction projects in Libya using the Delphi method. International Journal of Mechanical, Industrial Science and Engineering, 7, 715-719

The construction sector constitutes one of the most
important sectors in the economy of any country. Contractor selection is a critical decision that is undertaken by client organizations and is central to the success of any construction project. Co... Read More about Ranking of the main criteria for selection procedures on major construction projects in Libya using the Delphi method..

Monitoring thermal upgrades to ten traditional properties. (2013)
Report
Currie, J., Bros Williamson, J., & Stinson, J. (2013). Monitoring thermal upgrades to ten traditional properties. Edinburgh, Scotland: Historic Scotland

This Technical Paper sets out the pre-­‐ and post-­‐ intervention monitoring work carried out by The Scottish
Energy Centre (SEC) at Edinburgh Napier University
for Historic Scotland as part of the energy efficiency
refurbishment pilot programme o... Read More about Monitoring thermal upgrades to ten traditional properties..

An innovative design tool for optimisation of timber structures. (2013)
Presentation / Conference Contribution
Menendez, J. (2013, March). An innovative design tool for optimisation of timber structures. Presented at Young Researchers' Conference 2013

The purpose of this research project is to provide structural engineers with a user-friendly tool for the design of timber structures. This application also facilitates real-time structural optimisation by updating the latest research findings on inn... Read More about An innovative design tool for optimisation of timber structures..

Timber Post-formed Gridshell: Digital Form-finding / drawing and building tool. (2013)
Presentation / Conference Contribution
Pone, S., Colabella, S., D'Amico, B., Fiore, A., Lancia, D., & Parenti, B. (2013, September). Timber Post-formed Gridshell: Digital Form-finding / drawing and building tool. Presented at International Association for Shell and Spatial Structures (IASS) Symposium 2013 - BEYOND THE LIMITS OF MAN

Summary: This research deals with design, structural analysis and construction of timber post-formed gridshells. Starting from the scale modelling experience, from 1:20 to 1:1 scale, a digital form-finding strategy was early developed with a Building... Read More about Timber Post-formed Gridshell: Digital Form-finding / drawing and building tool..

A strategic review of the offsite construction sector in Scotland. (2013)
Report
Smith, S., Hairstans, R., Macdonald, R., & Sanna, F. (2013). A strategic review of the offsite construction sector in Scotland. Edinburgh, Scotland: Scottish Government

The offsite construction sector covers a wide spectrum of companies and supply chains across Scotland. This study primarily involved a review of the offsite construction sector for homes and buildings. The following key points have been extracted for... Read More about A strategic review of the offsite construction sector in Scotland..

Construction and form-finding of a post-formed timber grid-shell. (2013)
Presentation / Conference Contribution
Pone, S., Colabella, S., Parenti, B., Lancia, D., Fiore, A., D'Amico, B., Portioli, F., Landolfo, R., D'Aniello, M., & Ceraldi, C. (2013, July). Construction and form-finding of a post-formed timber grid-shell

In this paper, the design procedure and construction phases of a post-formed timber
grid-shell are described. For form-finding and verification of structural safety, two different
numerical models were developed. A particle-springs system tool was... Read More about Construction and form-finding of a post-formed timber grid-shell..

Housing Innovation Showcase 2012: Building Performance Evaluation, Phase 1-Part 1 (2013)
Report
Currie, J., Bros Williamson, J., & Stinson, J. (2013). Housing Innovation Showcase 2012: Building Performance Evaluation, Phase 1-Part 1. Inverness, Scotland: Kingdom Housing Association

The HIS comprised of twenty seven homes: twelve flats with communal gardens and fifteen houses with their own gardens. Within each of the blocks all of the tested dwellings varied in terms of size, form and construction technique. New technologies we... Read More about Housing Innovation Showcase 2012: Building Performance Evaluation, Phase 1-Part 1.

Structural design with Accoya wood (2013)
Journal Article
Crawford, D., Bongers, F., Alexander, J., Marcroft, J., Bongers, F., Alexander, J., Marcroft, J., Crawford, D., & Hairstans, R. (2013). Structural design with Accoya wood. International Wood Products Journal, 4(3), 172-176. https://doi.org/10.1179/2042645313y.0000000041

The benefits from acetylation of wood to enhance resistance against fungal decay and dimensional stability have been known for many years. Since 2007 Accsys Technologies has been commercially producing Accoya wood that is based on acetylation of Radi... Read More about Structural design with Accoya wood.

Mechanical and physical properties of thermally modified Scots pine wood in high pressure reactor under saturated steam at 120, 150 and 180°C (2013)
Journal Article
Rautkari, L., Honkanen, J., Hill, C. A. S., Ridley-Ellis, D., & Hughes, M. (2014). Mechanical and physical properties of thermally modified Scots pine wood in high pressure reactor under saturated steam at 120, 150 and 180°C. European Journal of Wood and Wood Products, 72, 33-41. https://doi.org/10.1007/s00107-013-0749-5

Scots pine sapwood and heartwood were thermally modified under saturated steam at 120, 150 and 180 °C in a high pressure reactor. Mechanical properties such as dynamic and static modulus of elasticity (MOE), static modulus of rupture (MOR), Brinell h... Read More about Mechanical and physical properties of thermally modified Scots pine wood in high pressure reactor under saturated steam at 120, 150 and 180°C.