Skip to main content

Research Repository

Advanced Search

Simulation of PMSM in maxwell 3D/simplorer to optimize direct flux control (2017)
Presentation / Conference Contribution
Mueller, T., See, C., Ghani, A., & Thiemann, P. (2017, June). Simulation of PMSM in maxwell 3D/simplorer to optimize direct flux control. Presented at IEEE International Symposium on Industrial Electronics (ISIE 2017), Edinburgh, Scotland

This paper discusses the problem of a sensorless control method for permanent magnet synchronous machines named Direct Flux Control (DFC). Direct Flux Control provides its users with the angle of the total flux in the machine at all working points, i... Read More about Simulation of PMSM in maxwell 3D/simplorer to optimize direct flux control.

Stability studies of different AC collection network topologies in wind farms (2017)
Presentation / Conference Contribution
Givaki, K., Chen, D., & Anaya-Lara, O. (2016, September). Stability studies of different AC collection network topologies in wind farms. Presented at Renewable Power Generation (RPG) 2016, 5th IET International Conference on

In this paper, the stability of different wind farm collection network topologies have been studied. As the wind farm becomes larger, the inter-array network becomes larger so that the impedance of overall system is increased. This means that the int... Read More about Stability studies of different AC collection network topologies in wind farms.

Electromagnetic wave control by metasurfaces: From design to manufacturing (2017)
Presentation / Conference Contribution
Spada, L. L., & Hao, Y. (2017, August). Electromagnetic wave control by metasurfaces: From design to manufacturing. Presented at 2017 XXXIInd General Assembly and Scientific Symposium of the International Union of Radio Science (URSI GASS), Montreal, QC

Recently, there have been a new interest in controlling and manipulating electromagnetic waves in different frequency ranges. The development of new two-dimensional materials, called meta-surfaces, have been used to control and tailor the electromagn... Read More about Electromagnetic wave control by metasurfaces: From design to manufacturing.

A New Weight based Rotating Clustering Scheme for WSNs (2017)
Presentation / Conference Contribution
Essa, A., Al-Dubai, A. Y., Romdhani, I., & Esriaftri, M. A. (2017, May). A New Weight based Rotating Clustering Scheme for WSNs. Presented at 2017 International Symposium on Networks, Computers and Communications (ISNCC)

Although energy efficiency in Wireless Sensor Networks (WSNs) has been investigated widely, it is still a challenging dilemma. Clustering mechanisms are among the most widely recommended approaches to sustaining a network throughout its lifetime. Des... Read More about A New Weight based Rotating Clustering Scheme for WSNs.

Design considerations for high-power converters interfacing 10 MW superconducting wind power generators (2017)
Journal Article
Vedreño Santos, F., Odavic, M., Guan, Y., Azar, Z., Thomas, A., Li, G.-J., & Zhu, Z. (2017). Design considerations for high-power converters interfacing 10 MW superconducting wind power generators. IET Power Electronics, 10(12), 1461-1467. https://doi.org/10.1049/iet-pel.2016.0512

The design of power electronic converters for the integration of wind generated power into the grid is more and more important due to a new class of Superconducting Generators (SG) with power ratings of up to 20 MW. High efficiency of power converter... Read More about Design considerations for high-power converters interfacing 10 MW superconducting wind power generators.

Electromagnetic waves control for antennas applications (2017)
Presentation / Conference Contribution
Spada, L. L., & Hao, Y. (2017, September). Electromagnetic waves control for antennas applications. Presented at 2017 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC), Verona, Italy

Recently, great interest in controlling and manipulating electromagnetic wave propagation from microwave to optical frequencies, has been emerged. Artificial sheet materials with sub-wavelength thickness, meta-surfaces, have been applied to control w... Read More about Electromagnetic waves control for antennas applications.

Compact wideband printed MIMO/diversity monopole antenna for GSM/UMTS and LTE applications (2017)
Book Chapter
See, C. H., Saleh, A., Alabdullah, A. A., Hameed, K., Abd-Alhameed, R. A., Jones, S., & Majeed, A. H. (2018). Compact wideband printed MIMO/diversity monopole antenna for GSM/UMTS and LTE applications. In I. Elfergani, A. Hussaini, J. Rodriguez, & R. Abd-Alhameed (Eds.), Antenna Fundamentals for Legacy Mobile Applications and Beyond (191-209). Springer. https://doi.org/10.1007/978-3-319-63967-3_10

Over the last decade, significant research effort has been devoted to enhance the isolation between multiple-input-multiple-output (MIMO) antenna elements. This has led to offer several solutions, which in terms of band calcifications may be categori... Read More about Compact wideband printed MIMO/diversity monopole antenna for GSM/UMTS and LTE applications.

Calibration model for detection of potential demodulating behaviour in biological media exposed to RF energy (2017)
Journal Article
See, C. H., Abd-Alhameed, R. A., Ghani, A., Ali, N. T., Excell, P. S., McEwan, N. J., & Balzano, Q. (2017). Calibration model for detection of potential demodulating behaviour in biological media exposed to RF energy. IET Science, Measurements and Technology, 11(7), 900-906. https://doi.org/10.1049/iet-smt.2017.0105

Potential demodulating ability in biological tissue exposed to radio-frequency (RF) signals intrinsically requires an unsymmetrical diode-like non-linear response in tissue samples. This may be investigated by observing possible generation of the sec... Read More about Calibration model for detection of potential demodulating behaviour in biological media exposed to RF energy.

Current technologies and location based services (2017)
Presentation / Conference Contribution
Ahmad, I., Asif, R., Abd-Alhameed, R., Alhassan, H., Elmegri, F., Noras, J., See, C., Obidat, H., Shuaieb, W., Riberio, J., Hameed, K., Alabdullah, A., Ali, A., Bin Melha, M., Al Khambashi, M., Migdadi, H., Child, M., Al-Sadoon, M., Abdussalam, F., Dunjuma, I., …Jones, S. (2017, September). Current technologies and location based services. Presented at 2017 Internet Technologies and Applications (ITA), Wrexham

This paper examines the benefits and drawbacks of these services, reviewing differences in infrastructure, power requirements, sensing devices, and other factors. Technologies covered include Radio Frequency Identification, GSM, GPS, A-GPS, Smart Ant... Read More about Current technologies and location based services.

Modeling and design for electromagnetic surface wave devices (2017)
Journal Article
La Spada, L., Haq, S., & Hao, Y. (2017). Modeling and design for electromagnetic surface wave devices. Radio Science, 52(9), 1049-1057. https://doi.org/10.1002/2017rs006379

A great deal of interest has reemerged recently in the study of surface waves. The possibility to control and manipulate electromagnetic wave propagations at will opens many new research areas and leads to lots of novel applications in engineering. I... Read More about Modeling and design for electromagnetic surface wave devices.

Comparison of Electromagnetic Performance of 10-MW Superconducting Generators With Different Topologies for Offshore Direct-Drive Wind Turbines (2017)
Journal Article
Guan, Y., Zhu, Z. Q., Azar, Z., Thomas, A. S., Vedreño-Santos, F., Li, G.-J., & Odavic, M. (2017). Comparison of Electromagnetic Performance of 10-MW Superconducting Generators With Different Topologies for Offshore Direct-Drive Wind Turbines. IEEE Transactions on Applied Superconductivity, 27(7), 1-11. https://doi.org/10.1109/tasc.2017.2732289

This paper compares the electromagnetic performance of 10MW superconducting (SC) generators with three different topologies, i.e., iron-cored stator and rotor (ISIRT), iron-cored stator and air-cored rotor (ISART), and air-cored stator and rotor (ASA... Read More about Comparison of Electromagnetic Performance of 10-MW Superconducting Generators With Different Topologies for Offshore Direct-Drive Wind Turbines.

Cellulose microfibrils as a pore former in electroless co-deposited anodes for solid oxide fuel cells. (2017)
Presentation / Conference Contribution
Turnbull, R. J., Shearer, N., & Wilson, C. (2017, July). Cellulose microfibrils as a pore former in electroless co-deposited anodes for solid oxide fuel cells. Presented at 15th International Symposium on Solid Oxide Fuel Cells (SOFC-XV), Hollywood, Florida, US

A study was conducted to investigate the feasibility of Cellulose Microfibrils (CMF) as a pore former in the manufacture of Solid Oxide Fuel Cell (SOFC) anodes using Electroless Co-Deposition (ECD). Previous work into the use of ECD to produce SOFC a... Read More about Cellulose microfibrils as a pore former in electroless co-deposited anodes for solid oxide fuel cells..

Direct flux control – sensorless control method of PMSM for all speeds – basics and constraints (2017)
Journal Article
Müller, T., See, C. H., Ghani, A., Bati, A., & Thiemann, P. (2017). Direct flux control – sensorless control method of PMSM for all speeds – basics and constraints. Electronics Letters, 53(16), 1110-1111. https://doi.org/10.1049/el.2017.1772

The limitations of sensorless control of permanent magnet synchronous machines (PMSMs) are discussed and a viable solution is proposed. The main concept of sensorless control of drives relies on additional information given by the machine during its... Read More about Direct flux control – sensorless control method of PMSM for all speeds – basics and constraints.

Link Budget Maximization for a Mobile-Band Subsurface Wireless Sensor in Challenging Water Utility Environments (2017)
Journal Article
See, C. H., Abd-Alhameed, R. A., Atojoko, A. A., McEwan, N. J., & Excell, P. S. (2018). Link Budget Maximization for a Mobile-Band Subsurface Wireless Sensor in Challenging Water Utility Environments. IEEE Transactions on Industrial Electronics, 65(1), 616-625. https://doi.org/10.1109/tie.2017.2719602

A subsurface chamber transceiver system and associated propagation channel link budget considerations for an underground wireless sensor system (UWSS) are presented: the application was a sewerage system for a water utility company. The UWSS operates... Read More about Link Budget Maximization for a Mobile-Band Subsurface Wireless Sensor in Challenging Water Utility Environments.

Miniaturized Balanced Antenna with Integrated Balun for Practical LTE Applications (2017)
Journal Article
Elfergani, I. T. E., Rodriguez, J., Abdussalam, F. M., See, C. H., & Abd-Alhameed, R. A. (2017). Miniaturized Balanced Antenna with Integrated Balun for Practical LTE Applications. Radioengineering, 26(2), 444-452. https://doi.org/10.13164/re.2017.0444

A design of dual-band balanced antenna structure operating in the 700 and 2600MHz LTE bands is studied and investigated. The overall dimensions of the radiator are 50 × 18 × 7 mm3 allowing it to be easily concealed within mobile handsets. A broad-ban... Read More about Miniaturized Balanced Antenna with Integrated Balun for Practical LTE Applications.

Tailoring of electromagnetic waves by metasurfaces (2017)
Presentation / Conference Contribution
Spada, L. L., & Hao, Y. (2017, March). Tailoring of electromagnetic waves by metasurfaces. Presented at 2017 11th European Conference on Antennas and Propagation (EUCAP), Paris, France

In the last few years, non-homogeneous metasurfaces captured huge interest in tailoring electromagnetic waves, ranging from microwave to optical frequencies. Several technologies have been proposed, but a general design approach is still missing: the... Read More about Tailoring of electromagnetic waves by metasurfaces.

Reliability and energy efficiency enhancement in wireless body area networks for e-health (2017)
Presentation / Conference Contribution
Salayma, M., Al-Dubai, A., & Romdhani, I. (2016, November). Reliability and energy efficiency enhancement in wireless body area networks for e-health. Presented at 2016 19th Conference of Open Innovations Association (FRUCT), Jyväskylä, Finland

Wireless Body Area Network (WBAN) is a technology that revolutionises our understanding of the future digitised healthcare systems. WBAN has unique challenges and features compared to other wireless sensor networks. In addition to battery power consu... Read More about Reliability and energy efficiency enhancement in wireless body area networks for e-health.

Methods for differential protection of Scott transformers (2017)
Journal Article
Sorrentino, E., Gupta, N., & Oliveros, E. (2017). Methods for differential protection of Scott transformers. Electric Power Systems Research, 147, 55-61. https://doi.org/10.1016/j.epsr.2017.02.018

This article describes different methods for the differential protection of Scott transformers, which are based on: (a) single-phase relays, (b) 3-phase relays for two-winding transformers, (c) 3-phase relays for multi-winding transformers, (d) speci... Read More about Methods for differential protection of Scott transformers.

An Active Microwave Sensor for Near Field Imaging (2017)
Journal Article
Mirza, A. F., See, C. H., Danjuma, I. M., Asif, R., Abd-Alhameed, R. A., Noras, J. M., Clarke, R. W., & Excell, P. S. (2017). An Active Microwave Sensor for Near Field Imaging. IEEE Sensors Journal, 17(9), 2749-2757. https://doi.org/10.1109/jsen.2017.2673961

Near field imaging using microwaves in medical applications is of great current interest for its capability and accuracy in identifying features of interest, in comparison with other known screening tools. This paper documents microwave imaging exper... Read More about An Active Microwave Sensor for Near Field Imaging.