Skip to main content

Research Repository

Advanced Search

All Outputs (106)

A systematic mapping study on assitive technologies for people with dementia (2015)
Presentation / Conference Contribution
Asghar, I., Cang, S., & Yu, H. (2015). A systematic mapping study on assitive technologies for people with dementia. In 2015 9th International Conference on Software, Knowledge, Information Management and Applications (SKIMA). https://doi.org/10.1109/ski

This paper presents a systematic mapping study based on literature and industrial survey related to assistive technologies for people with dementia. The world population of the ageing people is increasing both in developed and developing countries, s... Read More about A systematic mapping study on assitive technologies for people with dementia.

Four-axis test platform to emulate solar azimuth and elevation for accurate measurement of PV devices (2015)
Presentation / Conference Contribution
Siviter, J., Ashraf, A., Mullen, P., Montecucco, A., Knox, A., Selami, N., & Mallick, T. (2015). Four-axis test platform to emulate solar azimuth and elevation for accurate measurement of PV devices. In 11th Photovoltaic Science, Applications and Technol

The use of a solar source simulator in obtaining experimental data for a PV cell is well documented and current solar source technology is advanced in closely reproducing natural light in a laboratory setting. A test system is proposed by the authors... Read More about Four-axis test platform to emulate solar azimuth and elevation for accurate measurement of PV devices.

Unsteady optical and thermal behaviour of crossed compound parabolic concentrator with solar cell (2015)
Presentation / Conference Contribution
Li, W., Paul, M. C., Sellami, N., Mallick, T. K., & Knox, A. R. (2015). Unsteady optical and thermal behaviour of crossed compound parabolic concentrator with solar cell. In 11th Photovoltaic Science, Applications and Technology Conference, PVSAT-11 Univ

In reality, a solar panel with concentrator is subject to variable sunlight radiation, wind speed and environmental air temperature in a day, accordingly the solar output power is changed in a wide range of 2W-13W, causing a degraded electric perform... Read More about Unsteady optical and thermal behaviour of crossed compound parabolic concentrator with solar cell.

Modelling of electroluminescence in polymeric material using dimensional analysis method: effect of applied voltage and frequency (2015)
Presentation / Conference Contribution
Bani, N., Abdul-Malek, Z., Ahmad, H., Muhammad-Sukki, F., & Mas'ud, A. A. (2015). Modelling of electroluminescence in polymeric material using dimensional analysis method: effect of applied voltage and frequency. In Z. Mohamed, F. Saeed, I. A. Hamid-Mosak

Electroluminescence (EL) method has been used by several researchers to observe the behaviour of an aged polymeric material. EL is a phenomenon that occurs when the atoms of a material are being excited due to the application of and external high ele... Read More about Modelling of electroluminescence in polymeric material using dimensional analysis method: effect of applied voltage and frequency.

Statistical error tolerances of partial discharge recognition rates (2015)
Presentation / Conference Contribution
Mas'ud, A. A., Eltayeb, M. E., Muhammad-Sukki, F., & Bani, N. A. (2015). Statistical error tolerances of partial discharge recognition rates. In 2015 IEEE Conference on Sustainable Utilization And Development In Engineering and Technology (CSUDET). https

This paper compares the statistical error tolerances of the single neural network (SNN) and the ensemble neural network (ENN) recognition efficiencies, when both the SNN and ENN are applied to recognize partial discharge (PD) patterns. Statistical fi... Read More about Statistical error tolerances of partial discharge recognition rates.

Influences of integrating touch screen smart board and CAD in collaborative design (2015)
Presentation / Conference Contribution
Vasantha, G. V. A., Ramesh, H. P., Sugavanam, C. M., Chakrabarti, A., & Corney, J. (2015). Influences of integrating touch screen smart board and CAD in collaborative design. In DS 79: Proceedings of The Third International Conference on Design Creativit

Although a digital design tool like CAD has a strong influence on creative design, it is merely used in the detail design stage to present the visualized final product in 3D space. Limitations in CAD have led to the great emphasis on employing suppor... Read More about Influences of integrating touch screen smart board and CAD in collaborative design.

The thermal retrofitting of walls windows and ceilings in traditional Scottish buildings. (2015)
Presentation / Conference Contribution
Stinson, J., Bros Williamson, J., Reid, A., & Currie, J. (2015, September). The thermal retrofitting of walls windows and ceilings in traditional Scottish buildings. Presented at 6th International Conference on Energy and Sustainability

This paper documents research undertaken to evaluate the thermal transmittance of building elements – walls, windows and ceilings – both before and after the addition of insulation in traditionally constructed Scottish buildings. Thirteen different t... Read More about The thermal retrofitting of walls windows and ceilings in traditional Scottish buildings..

Conservation of a historic building through sympathetic thermal enhancement. (2015)
Presentation / Conference Contribution
Stinson, J., Bros Williamson, J., Reid, A., & Currie, J. (2015). Conservation of a historic building through sympathetic thermal enhancement. In Structural Studies, Repairs and Maintenance of Heritage Architecture XIV (633-642). https://doi.org/10.2495/S

This paper documents research undertaken by the Scottish Energy Centre at Edinburgh Napier University to refurbish a historic library building by means of thermal improvements. The interventions selected were specifically chosen to minimalise any imp... Read More about Conservation of a historic building through sympathetic thermal enhancement..

Assessment of efficiency of air abrasive cleaning on masonry stones and bricks using greyscale Imaging analysis. (2015)
Presentation / Conference Contribution
Reza, H., Zhang, B., & Gupta, N. K. (2015). Assessment of efficiency of air abrasive cleaning on masonry stones and bricks using greyscale Imaging analysis. In Proc. of the Second Intl. Conf. on Advances in Civil, Structural and Construction Engineering

Advanced greyscale imaging analysis was conducted using Adobe Photoshop 6 on the surfaces of masonry stones and clay bricks, taken from old buildings, to accurately assess the efficiency of building cleaning. Five commonly used masonry stones and... Read More about Assessment of efficiency of air abrasive cleaning on masonry stones and bricks using greyscale Imaging analysis..

Electric Vehicle Ventilation Using Directly Photovoltaic Powered Fans (2015)
Presentation / Conference Contribution
Muneer, T., Kolhe, M. L., Adhikari, S. K., & Smith, I. (2015). Electric Vehicle Ventilation Using Directly Photovoltaic Powered Fans.

All over the world, transport sector is contributing heavily towards Greenhouse Gas (GHG) emissions. The electric vehicles offers an elegant solution in terms of increasing overall efficiency compared with its fossil-fuel counterpart. Furthermore, if... Read More about Electric Vehicle Ventilation Using Directly Photovoltaic Powered Fans.

A comparative range approach using the Real World Drive Cycles and the Battery Electric Vehicle (2015)
Presentation / Conference Contribution
Milligan, R., Muneer, T., & Smith, I. (2015). A comparative range approach using the Real World Drive Cycles and the Battery Electric Vehicle. . https://doi.org/10.1109/ITEC-India.2015.7386934

In the UK, a quarter of all CO2 emissions come from transport and 90% of this comes from road vehicles. According to the UK Government (a) at the end of 2013 there were 35 million vehicles licensed for use on the roads of UK and during 2013, over 430... Read More about A comparative range approach using the Real World Drive Cycles and the Battery Electric Vehicle.

Illegal pedestrian crossing at signalised junctions in urban areas: the impact of spatial factors. (2015)
Presentation / Conference Contribution
Mayeux, A., Lovreglio, R., Saleh, W., & Fonzone, A. (2015). Illegal pedestrian crossing at signalised junctions in urban areas: the impact of spatial factors. In TRB 94th Annual Meeting Compendium of Papers

Much has still to be done to increase pedestrian safety. Illegal crossing at signalised junctions may increase the risk of accidents at the intersections where it takes place and induce dangerous habits. Therefore efforts to prevent such a harmful be... Read More about Illegal pedestrian crossing at signalised junctions in urban areas: the impact of spatial factors..

Investigating the Impact of Ground Albedo on the Performance of PV Systems (2015)
Presentation / Conference Contribution
Kotak, Y., Gul, M. S., Muneer, T., & Ivanova, S. M. (2015). Investigating the Impact of Ground Albedo on the Performance of PV Systems.

Several factors influence the energy generation of Photovoltaic (PV) installations. A ground albedo value of 0.2 is widely accepted and is used in modelling of PV systems. Foreground surfaces may have different albedo and hence a constant albedo valu... Read More about Investigating the Impact of Ground Albedo on the Performance of PV Systems.

Performance evaluation of electric vehicle ventilation using directly powered photovoltaic fans (2015)
Presentation / Conference Contribution
Kolhe, M. L., Muneer, T., Adhikari, S. K., & Smith, I. (2015). Performance evaluation of electric vehicle ventilation using directly powered photovoltaic fans. . https://doi.org/10.1109/ITEC-India.2015.7386939

Electric vehicles have tremendous potential for reducing greenhouse gas emissions. One of the main draw-back of the electric vehicle though is the sourcing of energy for air-conditioning of its cabin space. In this work, a fully instrumented Renault... Read More about Performance evaluation of electric vehicle ventilation using directly powered photovoltaic fans.

Performance analysis of photovoltaic powered dc motor - Propeller system. (2015)
Presentation / Conference Contribution
Kolhe, M., Atlam, O., Muneer, T., & Adhikari, S. K. (2015). Performance analysis of photovoltaic powered dc motor - Propeller system. In 2015 IEEE International Conference on Signal Processing, Informatics, Communication and Energy Systems (SPICES) (1-4)

The application of autonomous directly photovoltaic (PV) powered electro-mechanical has received increasing attention for different applications (e.g. PV water pumping, PV powered cooling of arid climate greenhouses, solar vehicles etc). The PV array... Read More about Performance analysis of photovoltaic powered dc motor - Propeller system..

Understanding seaport competitiveness of global transhipment hub ports in the Caribbean region: an application of a generalized diamond model (2015)
Presentation / Conference Contribution
Julien, S., & Monios, J. (2015). Understanding seaport competitiveness of global transhipment hub ports in the Caribbean region: an application of a generalized diamond model. In Proceedings of the International Association of Maritime Economists (IAME)

Presentation delivered at the International Association of Maritime Economists (IAME) Conference 2015.

Energy demand benchmarking of non-domestic buildings in Scotland. (2015)
Presentation / Conference Contribution
Chetboul, J., Garnier, C., & Bros Williamson, J. (2015). Energy demand benchmarking of non-domestic buildings in Scotland.

Over the years building energy performance has become a predominant concern for owners and real estate managers. The focus is usually on residential buildings but in the last twenty years an interest in non-domestic buildings has emerged in the UK. B... Read More about Energy demand benchmarking of non-domestic buildings in Scotland..

The Practice of the Sino-foreign Cooperation in Running Schools of Engineering Disciplines (2015)
Presentation / Conference Contribution
Wang, Z., Zhang, Y., & Smith, I. (2015). The Practice of the Sino-foreign Cooperation in Running Schools of Engineering Disciplines. . https://doi.org/10.2991/msmi-15.2015.3

Lying in a transformation period of economic development, economic prosperity, social progress and development in science and technology have to rely on strong competitiveness of a nation’s universities to a large degree. Internationalising education... Read More about The Practice of the Sino-foreign Cooperation in Running Schools of Engineering Disciplines.

Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids (2015)
Presentation / Conference Contribution
Shyha, I., Gariani, S., & Bhatti, M. (2015, July). Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids. Presented at Manufacturing Engineering Society International Conference, MESI

Power consumed in metal cutting is typically converted into heat near the cutting tool edge. Cutting fluids are then provided to a cutting zone in order to improve the tribological characteristics of machining processes and to dissipate the generated... Read More about Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids.