Skip to main content

Research Repository

Advanced Search

All Outputs (46)

Walking, Observing and Making – Rethinking Plastics in Edinburgh (2024)
Presentation / Conference Contribution
Tao, C. X., Vettese, S., & Anastasiadou, C. (2024, March). Walking, Observing and Making – Rethinking Plastics in Edinburgh. Paper presented at Eighteenth International Conference on Design Principles & Practices, Valencia, Spain

Plastic is a widely used material with great longevity, if designed, utilised, and re-used properly. However, the average usable lifespan for single-use plastic products is as little as 15 minutes and generally ends in landfill. The over consumption... Read More about Walking, Observing and Making – Rethinking Plastics in Edinburgh.

3D Printing Ocean Plastic – Experiments, Experience and Engagement (2022)
Presentation / Conference Contribution
Tao, C. X., & Vettese, S. (2022, November). 3D Printing Ocean Plastic – Experiments, Experience and Engagement. Presented at 3D Printing & Additive Manufacturing, Paris, France

Background : One severe and urgent environmental problem facing this planet is ocean plastic pollution. As a material with excellent properties recyclability, ocean plastics have the potential to be recalled back to the production process for repurpo... Read More about 3D Printing Ocean Plastic – Experiments, Experience and Engagement.

Souvenir authenticity in the additive manufacturing age (2021)
Journal Article
Anastasiadou, C., & Vettese, S. (2021). Souvenir authenticity in the additive manufacturing age. Annals of Tourism Research, 89, Article 103188. https://doi.org/10.1016/j.annals.2021.103188

The expansion of additive manufacturing or 3D printing as a novel (re)production method disrupts social consumption patterns and challenges existing conceptualisations of tourist souvenirs as material, metonymic and symbolic objects that often lack a... Read More about Souvenir authenticity in the additive manufacturing age.

Livingston New Town: Art, History, People (2019)
Exhibition / Performance
Vettese, S., & Devison, N. Livingston New Town: Art, History, People. [3D printed objects]. 29 November 2019 - 22 November 2020

Livingston New Town: Art, History, People

Drawing on a wealth of photographs, illustrations and models, as well as historical artefacts from the museums and the archival collection of West Lothian, this exhibition explores the identity of Livingst... Read More about Livingston New Town: Art, History, People.

Livi Modern (2019)
Exhibition / Performance
Vettese, S., & Devison, N. Livi Modern. [artefacts]. Exhibited at St Andrew's Church, Livingston. 15 June 2019 - 15 June 2019

Livi Modern is a multimedia exhibition by four artists, Nicholas Devison, Dawn McDowell, Simon Montgomery and Sam Vettese, who have created artwork inspired by their shared interest in the surviving modernism of Livingston’s new town. In the early 19... Read More about Livi Modern.

Reconsidering the forgotten 'shoddy' industry and concepts of authenticity through 3D printed, repurposed selvedge waste. (2019)
Journal Article
Vettese, S. (2019). Reconsidering the forgotten 'shoddy' industry and concepts of authenticity through 3D printed, repurposed selvedge waste. Making Futures, 5,

Sustainability, biodegradability and circularity are important issues in the textile and fashion industry, with very few tangible solutions that have the potential to make an impact. The research team’s project, which utilises waste from the Scottish... Read More about Reconsidering the forgotten 'shoddy' industry and concepts of authenticity through 3D printed, repurposed selvedge waste..

A study of childrens' relationship with making and use of CAD in collaborative, physical and digital environments : implications for learning and open access fabrication (2018)
Journal Article
Vettese, S., Allan, D., & Thompson, P. (2018). A study of childrens' relationship with making and use of CAD in collaborative, physical and digital environments : implications for learning and open access fabrication. Design and Technology Education: An International Journal, 23(3), 10-25

In this paper, the researchers will investigate different ways in which school age, 'generation net' children learn, through non-linear, mediated, collaborative ‘making’ environments, enabled by online communities of ‘citizen practitioners' and maker... Read More about A study of childrens' relationship with making and use of CAD in collaborative, physical and digital environments : implications for learning and open access fabrication.

“From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs (2018)
Journal Article
Anastasiadou, C., & Vettese, S. (2019). “From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs. Tourism Management, 71, 428-442. https://doi.org/10.1016/j.tourman.2018.10.032

Souvenirs, whether mass-produced commodities made elsewhere or local artisanal handicrafts, are static objects that lack the capacity to mediate or generate the co-creative, active or immersive experiences that tourists desire. The expansion of addit... Read More about “From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs.

Textile applications of commercial photochromic dyes: part 7. A statistical investigation of the influence of photochromic dyes on the mechanical properties of thermoplastic fibres (2018)
Journal Article
Younes, B., Ward, S. C., Christie, R. M., & Vettese, S. (2019). Textile applications of commercial photochromic dyes: part 7. A statistical investigation of the influence of photochromic dyes on the mechanical properties of thermoplastic fibres. Journal of the Textile Institute, 110(5), 1-11. https://doi.org/10.1080/00405000.2018.1526444

The influence of the concentration of a commercial photochromic dye, incorporated into as-spun and drawn fibres produced from polyethylene and polypropylene, on their mechanical properties was investigated. As-spun fibres were produced by incorporati... Read More about Textile applications of commercial photochromic dyes: part 7. A statistical investigation of the influence of photochromic dyes on the mechanical properties of thermoplastic fibres.

AHRC Design Research for Change Showcase (2018)
Exhibition / Performance
Vettese, S., Anastasiadou, C., Calder, L., Vones, K., Burton, K., & Allan, D. AHRC Design Research for Change Showcase. 20 September 2018 - 23 September 2018

No abstract available.

Digital Revolution or Plastic Gimmick? Authenticity in 3D Souvenirs (2018)
Book Chapter
Anastasiadou, C., & Vettese, S. (2018). Digital Revolution or Plastic Gimmick? Authenticity in 3D Souvenirs. In J. M. Rickly, & E. S. Vidon (Eds.), Authenticity & Tourism Materialities, Perceptions, Experiences (165-179). Emerald

Mass-market production of souvenirs, their disposability and their mixed up, interpretive styling may detach the tourist from
the actual experience. Conversely, it is the personal relationship that
is formed between the tourist and the souvenir tha... Read More about Digital Revolution or Plastic Gimmick? Authenticity in 3D Souvenirs.

Western and Eastern Building Conservation Philosophies: Perspectives on Permanence and Impermanence (2018)
Journal Article
Forster, A. M., Thomson, D., Richards, K., Pilcher, N., & Vettese, S. (2019). Western and Eastern Building Conservation Philosophies: Perspectives on Permanence and Impermanence. International Journal of Architectural Heritage, 13(6), 870-885. https://doi.org/10.1080/15583058.2018.1490827

In this conceptual paper, we illuminate Western building conservation philosophy practice with insights into Eastern conservation philosophy and associated aesthetic understanding. We frame dialogue recognising individual and societal perspectives on... Read More about Western and Eastern Building Conservation Philosophies: Perspectives on Permanence and Impermanence.

3D printed building sections and joining pieces, inspired by the architecture of Basil Spence (2018)
Physical Artefact
Vettese, S., & Vones, K. 3D printed building sections and joining pieces, inspired by the architecture of Basil Spence. [Physical Artefact]. Edinburgh Napier University

A series of one-day workshop events were staged to engage the public with the architecture of Basil Spence, firstly at Edinburgh Napier University’s Maker Space and then within Edinburgh University’s Library, designed by Basil Spence. Participants we... Read More about 3D printed building sections and joining pieces, inspired by the architecture of Basil Spence.

Customisable 3D printed model of Robin Hood Gardens (2018)
Physical Artefact
Vettese, S., & Vones, K. Customisable 3D printed model of Robin Hood Gardens. [Physical Artefact]. Edinburgh Napier University

This research proposed to utilise the processes and experiences of designing and making 3D printed 'souvenirs of place', with regards to Modern 'overlooked' heritage. The public were asked to interact with 3D modelling technology, to personalise a pr... Read More about Customisable 3D printed model of Robin Hood Gardens.

1.5cm Unicorn Souvenirs (2018)
Physical Artefact
Vettese, S., & Anastasiadou, C. 1.5cm Unicorn Souvenirs. [Physical artefact]. Edinburgh Napier University

This study explored the possibilities and challenges that 3D printing could generate in the production and consumption of tourist souvenirs. The team undertook a study in collaboration with Historic Environment Scotland (previously Historic Scotland)... Read More about 1.5cm Unicorn Souvenirs.

In Situ, 3D Printed Heritage Souvenirs: Challenging Conventional Spaces and Culture (2018)
Journal Article
Vettese, S., & Anastasiadou, C. (2018). In Situ, 3D Printed Heritage Souvenirs: Challenging Conventional Spaces and Culture. The Journal of Peer Production, 12, 27-39

This paper outlines an Arts and Humanities Research Council (AHRC) funded Design Innovation Development Award project titled ' Enhancing the Authenticity and Sustainability of the Visitor Heritage Experience through 3D Printing Technology', undertake... Read More about In Situ, 3D Printed Heritage Souvenirs: Challenging Conventional Spaces and Culture.

3D printed St Gabriel’s Chapel musical souvenir with interchangeable components (2018)
Physical Artefact
Vettese, S., Vones, K., Allan, D., & Burton, K. (2018). 3D printed St Gabriel’s Chapel musical souvenir with interchangeable components. [Physical Artefact]. Edinburgh Napier University

The research group have created a musical, 3D printed souvenir with interchangeable components so that the owner can create their own, personalised version of the musical experience after they have visited the church and experienced the musical perfo... Read More about 3D printed St Gabriel’s Chapel musical souvenir with interchangeable components.

3D Printed souvenir of Craigsbank Church (2018)
Physical Artefact
Vettese, S., & Vones, K. 3D Printed souvenir of Craigsbank Church. [Physical Artefact]. Edinburgh Napier University

The aim of this project is to evaluate how in-situ and interactive musical compositions and digital craft may mediate the understanding, appreciation and value attached to, as yet, unloved, Modern architectural heritage.

Contemporary musical comp... Read More about 3D Printed souvenir of Craigsbank Church.