Skip to main content

Research Repository

Advanced Search

All Outputs (69)

Research into mainstreaming offsite modern methods of construction (MMC) in house building. (2015)
Report
McCallie, M., MacLeod, A., Good, S., Murray, C., & Hairstans, R. (2015). Research into mainstreaming offsite modern methods of construction (MMC) in house building

In Scotland’s Sustainable Housing Strategy we set out
Scottish Ministers’ vision for warm, high quality, affordable,
low carbon homes and a housing sector that helps to
establish a successful low carbon economy across Scotland.
One of the strateg... Read More about Research into mainstreaming offsite modern methods of construction (MMC) in house building..

Viability of cross-laminated timber from UK resources (2015)
Journal Article
Crawford, D., Smith, S., Hairstans, R., & Papastavrou, P. (2015). Viability of cross-laminated timber from UK resources. Proceedings of the ICE - Construction Materials, 168(3), 110-120. https://doi.org/10.1680/coma.14.00064

Cross-laminated timber is an innovative engineered timber product that can be used for almost all superstructure elements. It is typically produced from kiln-dried, fast-growing softwood timber. Currently there is no commercial production in the UK a... Read More about Viability of cross-laminated timber from UK resources.

The Case for Mass Customisation of Structural Timber Design (2015)
Presentation / Conference Contribution
Livingstone, A., Menendez, J., Leitch, K., & Hairstans, R. (2015). The Case for Mass Customisation of Structural Timber Design. . https://doi.org/10.1061/9780784479117.243

This paper reports on the potential of timber for structural applications in the
international construction market, particularly in the light of its environmental
credentials and the advances being made in engineered timber products. The UK market... Read More about The Case for Mass Customisation of Structural Timber Design.

Sole plate fixing details for modern methods of timber construction. (2014)
Book Chapter
Menendez, J., Leitch, K., & Hairstans, R. (2014). Sole plate fixing details for modern methods of timber construction. In S. Aicher, H. W. Reinhardt, & H. Garrecht (Eds.), Materials and joints in timber structures: recent development of technologies (109-118). Springer. https://doi.org/10.1007/978-94-007-7811-5_10

In order to resist lateral loads, modern methods of timber construction are reliant on the in-plane shear strength of the walls orientated parallel to the applied action. In closed panel systems, the shear stresses are transferred to the foundations... Read More about Sole plate fixing details for modern methods of timber construction..

A strategic review of the offsite construction sector in Scotland. (2013)
Report
Smith, S., Hairstans, R., Macdonald, R., & Sanna, F. (2013). A strategic review of the offsite construction sector in Scotland. Edinburgh, Scotland: Scottish Government

The offsite construction sector covers a wide spectrum of companies and supply chains across Scotland. This study primarily involved a review of the offsite construction sector for homes and buildings. The following key points have been extracted for... Read More about A strategic review of the offsite construction sector in Scotland..

Structural design with Accoya wood (2013)
Journal Article
Crawford, D., Bongers, F., Alexander, J., Marcroft, J., Bongers, F., Alexander, J., …Hairstans, R. (2013). Structural design with Accoya wood. International Wood Products Journal, 4(3), 172-176. https://doi.org/10.1179/2042645313y.0000000041

The benefits from acetylation of wood to enhance resistance against fungal decay and dimensional stability have been known for many years. Since 2007 Accsys Technologies has been commercially producing Accoya wood that is based on acetylation of Radi... Read More about Structural design with Accoya wood.

Feasibility of cross-laminated timber production from UK Sitka Spruce. (2013)
Presentation / Conference Contribution
Crawford, D., Hairstans, R., & Smith, R. E. (2013). Feasibility of cross-laminated timber production from UK Sitka Spruce.

Cross-Laminated Timber (CLT) is an innovative wood product, which can be used for almost all superstructure elements. It is generally produced from kiln dried, fast growing timber. Currently the majority of CLT used within the UK construction industr... Read More about Feasibility of cross-laminated timber production from UK Sitka Spruce..

Assessment of the structural performance of Accoya wood for GluLam fabrication. (2012)
Presentation / Conference Contribution
Crawford, D., Hairstans, R., Alexander, J., & Bongers, F. (2012). Assessment of the structural performance of Accoya wood for GluLam fabrication.

Accoya® GluLam beams were specified for use as an external foundation support detail for an innovative low carbon affordable home in the Scottish Highlands. This detail was identified in collaboration with Neil Sutherland Architects (NSA) LLP where t... Read More about Assessment of the structural performance of Accoya wood for GluLam fabrication..

Structural optimisation of timber off-site modern methods of construction. (2012)
Presentation / Conference Contribution
Sanna, F., Hairstans, R., Leitch, K., Crawford, D., Menendez, J., & Turnbull, D. (2012). Structural optimisation of timber off-site modern methods of construction.

Efficient and sustainable building systems are required
in order to achieve the UK government’s target of
building three million new homes by 2016. Given the
current lack of activity in the housing construction
market to achieve this target, incr... Read More about Structural optimisation of timber off-site modern methods of construction..

A structural engineering platform for timber modern methods of construction. (2012)
Presentation / Conference Contribution
Menendez, J., Hairstans, R., Leitch, K., & Turnbull, D. (2012). A structural engineering platform for timber modern methods of construction.

The UK has a housing deficit, requiring 3 million new homes by 2020 that will have to conform to national environmental policy and the corresponding regional building regulation requirements. The economic down turn has exacerbated this problem and as... Read More about A structural engineering platform for timber modern methods of construction..

Accoya structural design guide to Eurocode 5. (2012)
Report
Lawrence, A., Marcroft, J., Crawford, D., & Hairstans, R. (2012). Accoya structural design guide to Eurocode 5. Edinburgh, Scotland: Accsys Technologies

Until now, using wood in damp external conditions for structural applications has been a real challenge, chiefly because of the risk of fungal attack. The most effective preservatives are by definition toxic and so have environmental issues both in u... Read More about Accoya structural design guide to Eurocode 5..

Structural performance of external timber cladding. (2010)
Presentation / Conference Contribution
Crawford, D., Hairstans, R., & Davies, I. (2010). Structural performance of external timber cladding. In 11th World Conference on Timber Engineering 2010 (WCTE 2010) (2354-2358)

Although timber cladding has been used for centuries, the current design guidance for timber cladding has received very little research attention with regards to structural performance. Due to the growing demand in several countries for medium rise t... Read More about Structural performance of external timber cladding..

The development of a hybrid racking panel - appraisal of methods for strength and stiffness calculation. (2010)
Presentation / Conference Contribution
Leitch, K., & Hairstans, R. (2010). The development of a hybrid racking panel - appraisal of methods for strength and stiffness calculation. In 11th World Conference on Timber Engineering 2010

Throughout the U.K, Timber Platform Frame is increasingly being utilized in the high volume, low cost housing market. Here, the client’s desire for fully detached housing often leads to narrow properties with openings concentrated in the shorter wall... Read More about The development of a hybrid racking panel - appraisal of methods for strength and stiffness calculation..

Off-site and modern methods of timber construction a sustainable approach. (2010)
Book
Hairstans, R. (2010). Off-site and modern methods of timber construction a sustainable approach. TRADA Technology Ltd

Many prefer the versatility of timber frame for panelised, volumetric and hybrid 'built offsite' systems. Other suitable formats include timber post and beam, 'massive' construction using cross-laminated timber, and structural insulated panel systems... Read More about Off-site and modern methods of timber construction a sustainable approach..