Shot fired dowel flitch beams.

Hairstans, Robert; Kermani, Abdy; Lawson, Rod

Abstract

Flitch beams are a form of sandwich construction using steel and timber elements. They are used in the construction of domestic dwellings when relatively high loads and long spans predominate but available depth of section is restricted in some way. Traditional flitch beams use a bolted connection to hold the elements together, which is a time consuming method of fabrication requiring the pre-drilling of holes in the steel and timber elements. It also presents problems in design detailing. Bolt slippage and fabrication tolerances result in disproportionate stress transfer due to uneven strain affecting the stiffness and strength properties of the beam. This paper details the findings from a series of laboratory tests and parametric studies on flitch beams constructed from either Kerto S Laminated Veneer Lumber (LVL) or C24 grade timber using a shot-fired dowel connection. The tests showed that during the elastic range proportional stress transfer took place. However, at higher load levels there is uneven stress transfer due to localised buckling of the steel in the top chord and a weakening of the timber elements of the beam due to splitting at the nailing points.

Citation

Hairstans, R., Kermani, A., & Lawson, R. (2005, November). Shot fired dowel flitch beams. Presented at The 2nd International Scottish Conference for Postgraduate Researchers of the Built and Natural Environment

• Conference Name: The 2nd International Scottish Conference for Postgraduate Researchers of the Built and Natural Environment
• Start Date: Nov 16, 2005
• End Date: Nov 17, 2005
• Publication Date: 2005
• Deposit Date: May 18, 2016
• Peer Reviewed: Peer Reviewed
• ISBN: 1-903661-82-X
• Keywords: composite beams; strength and stiffness; timber structures; connections
• Public URL: http://researchrepository.napier.ac.uk/id/eprint/10232