Skip to main content

Research Repository

Advanced Search

Outputs (63)

Design for Additive Manufacturing and Finite Element Analysis of Fe-Mn Biodegradable Fracture Fixation Plate with Varying Porosity Levels (2023)
Presentation / Conference Contribution
Shaikh, M., Kahwash, F., Lu, Z., Alkhreisat, M., & Shyha, I. (2023, September). Design for Additive Manufacturing and Finite Element Analysis of Fe-Mn Biodegradable Fracture Fixation Plate with Varying Porosity Levels. Presented at International Conferenc

Fracture fixation plates are osteosynthesis implants used to fix fractured bones in a human body. They are either left in the body or required to be removed after a bone healing period of 3–6 months. Recent trends focus on developing iron (Fe) based... Read More about Design for Additive Manufacturing and Finite Element Analysis of Fe-Mn Biodegradable Fracture Fixation Plate with Varying Porosity Levels.

Magnetic excitation spectrum and Hamiltonian of the quantum spin chain compound BaCuTe2O6 (2023)
Journal Article
Samartzis, A., Chillal, S., Jeschke, H. O., Voneshen, D. J., Lu, Z., Islam, A. T. M. N., & Lake, B. (2023). Magnetic excitation spectrum and Hamiltonian of the quantum spin chain compound BaCuTe2O6. Physical Review B, 107(18), https://doi.org/10.1103/phys

Abstract The magnetic excitation spectrum and Hamiltonian of the quantum magnet BaCuTe2O6 is studied by inelastic neutron scattering (INS) and density functional theory (DFT). INS on powder and single crystal samples reveals overlapping spinon con... Read More about Magnetic excitation spectrum and Hamiltonian of the quantum spin chain compound BaCuTe2O6.

The Influence of BaTiO 3 Content on the Energy Storage Properties of Bi 0.5 Na 0.5 TiO 3 -Bi(Mg 2/3 Nb 1/3 )O 3 Lead-Free Ceramics (2023)
Journal Article
Li, Z., Zhang, D., Wang, C., Zhang, J., Wang, Z., Wang, Z., Yan, X., Ai, T., Wang, D., Lu, Z., & Niu, Y. (2023). The Influence of BaTiO 3 Content on the Energy Storage Properties of Bi 0.5 Na 0.5 TiO 3 -Bi(Mg 2/3 Nb 1/3 )O 3 Lead-Free Ceramics. Crystals,

Na0.5Bi0.5TiO3 (NBT)-based ceramics are promising lead-free candidates for energy-storage applications due to their outstanding dielectric and ferroelectric properties derived from large polarization. However, the high coercive field and large remnan... Read More about The Influence of BaTiO 3 Content on the Energy Storage Properties of Bi 0.5 Na 0.5 TiO 3 -Bi(Mg 2/3 Nb 1/3 )O 3 Lead-Free Ceramics.

Multiple local symmetries result in a common average polar axis in high strain BiFeO3 based ceramics (2023)
Journal Article
Wang, G., Hu, T., Zhu, W., Lu, Z., Kleppe, A., Diaz Lopez, M., …Reaney, I. M. (2023). Multiple local symmetries result in a common average polar axis in high strain BiFeO3 based ceramics. Physical review letters, 130(7), https://doi.org/10.1103/PhysRevL

For the first time, the origin of large electrostrain in pseudocubic BiFeO3-based ceramics is verified with direct structural evidence backed by appropriate simulations. We employ advanced structural and microstructural characterisations of BiFeO3 ba... Read More about Multiple local symmetries result in a common average polar axis in high strain BiFeO3 based ceramics.

Preparation of Elastomeric Nanocomposites Using Nanocellulose and Recycled Alum Sludge for Flexible Dielectric Materials (2022)
Journal Article
Sun, D., Saw, B. L., Onyianta, A. J., Wang, B., Wilson, C., O'Rourke, D., …Lu, Z. (2023). Preparation of Elastomeric Nanocomposites Using Nanocellulose and Recycled Alum Sludge for Flexible Dielectric Materials. Journal of Advanced Dielectrics, 13(01),

Flexible dielectric materials with environmental-friendly, low-cost and high-energy density characteristics are in increasing demand as the world steps into the new Industrial 4.0 era. In this work, an elastomeric nanocomposite was developed by incor... Read More about Preparation of Elastomeric Nanocomposites Using Nanocellulose and Recycled Alum Sludge for Flexible Dielectric Materials.

Energy storage properties in Nd doped AgNbTaO3 lead-free antiferroelectric ceramics with Nb-site vacancies (2022)
Journal Article
Lu, Z., Sun, D., Wang, G., Zhao, J., Zhang, B., Wang, D., & Shyha, I. (2023). Energy storage properties in Nd doped AgNbTaO3 lead-free antiferroelectric ceramics with Nb-site vacancies. Journal of Advanced Dielectrics, 13(01), Article 2242006. https://doi

It is crucial to discover lead-free materials with ultrahigh recoverable energy density (Wrec) that can be employed in future pulse power capacitors. In this work, a high Wrec of 4.51 J/cm3 was successfully obtained in lead-free Nd-doped AgNb0.8Ta0.... Read More about Energy storage properties in Nd doped AgNbTaO3 lead-free antiferroelectric ceramics with Nb-site vacancies.

Preparation of flexible dielectric nanocomposites using nanocellulose and recycled alum sludge for wearable technology applications (2022)
Journal Article
Sun, D., Saw, L., Onyianta, A., 'rourke, Lu, Z., Wilson, C., See, C. H., Popescu, C., Dorris, M., & Shyha, I. (2022). Preparation of flexible dielectric nanocomposites using nanocellulose and recycled alum sludge for wearable technology applications.

With the rapid development of wearable technology, flexible dielectric materials with environmental-friendly, low-cost and high-energy efficiency characteristics are in increasing demand. In this work, a flexible dielectric nanocomposite was develope... Read More about Preparation of flexible dielectric nanocomposites using nanocellulose and recycled alum sludge for wearable technology applications.

Effects of Processing Strategies and La + Sm Co-Doping on the Thermoelectric Performance of A-Site-Deficient SrTiO3-δ Ceramics (2022)
Journal Article
Iyasara, A. C., Lu, Z., Schmidt, W. L., Sinclair, D. C., & Reaney, I. M. (2022). Effects of Processing Strategies and La + Sm Co-Doping on the Thermoelectric Performance of A-Site-Deficient SrTiO3-δ Ceramics. Crystals, 12(11), Article 1622. https://doi.o

The effect of calcining in either air (VSTO-A) or 5% H2/N2 (VSTO-H) on the thermoelectric performance of La and Sm co-doped A-site-deficient Sr1-3x/2Lax/2Smx/2TiO3-δ ceramics is reported. All calcined powders were sintered 6 h in 5% H2/N2 at 1773 K t... Read More about Effects of Processing Strategies and La + Sm Co-Doping on the Thermoelectric Performance of A-Site-Deficient SrTiO3-δ Ceramics.

Ionic selective occupation, lattice modulation and photoluminescence properties of garnet typed orange-yellow phosphors for White-Light-Emitting Diodes (2022)
Journal Article
Yang, C., Chen, X., Mao, M., Luo, X., Sheng, W., Lu, Z., …Song, K. (2023). Ionic selective occupation, lattice modulation and photoluminescence properties of garnet typed orange-yellow phosphors for White-Light-Emitting Diodes. Ceramics International, 4

Orange-yellow luminescent Y2-xSr1-yAl4SiO12: xCe3+, yMn2+ (x = 0.04–0.06, y = 0.1–0.6, abbreviated as YSAS: xCe3+, yMn2+) phosphors with garnet structure were prepared by the high temperature solid-phase method. The matrix energy band is calculated b... Read More about Ionic selective occupation, lattice modulation and photoluminescence properties of garnet typed orange-yellow phosphors for White-Light-Emitting Diodes.

Temperature-stable Y2.95Dy0.05MgAl3SiO12 garnet-type 5G millimeter-wave dielectric ceramic resonator antenna (2022)
Journal Article
Jiang, Y., Liu, H., Xiu, Z., Wu, G., Mao, M., Luo, X., …Song, K. (2022). Temperature-stable Y2.95Dy0.05MgAl3SiO12 garnet-type 5G millimeter-wave dielectric ceramic resonator antenna. Ceramics International, 48(23), 35085-35091. https://doi.org/10.1016/j

Temperature stability is a crucial property of microwave electronic components, as well as a pivotal aspect of assessing the performance of microwave dielectric ceramics. In this article, the temperature coefficient of high-Q × f garnet-type Y2.95Dy0... Read More about Temperature-stable Y2.95Dy0.05MgAl3SiO12 garnet-type 5G millimeter-wave dielectric ceramic resonator antenna.