Skip to main content

Research Repository

Advanced Search

Outputs (211)

AHRC Design Research for Change Showcase (2018)
Exhibition / Performance
Vettese, S., Anastasiadou, C., Calder, L., Vones, K., Burton, K., & Allan, D. AHRC Design Research for Change Showcase. 20 September 2018 - 23 September 2018

No abstract available.

An exploration of the sustainable and aesthetic possibilities of 3D printing onto textiles as an alternative to traditional surface decoration (2017)
Presentation / Conference Contribution
Burn, K., Vettese, S., & Shackleton, J. (2017). An exploration of the sustainable and aesthetic possibilities of 3D printing onto textiles as an alternative to traditional surface decoration. In Circular Transitions Proceedings (141-154)

Embellishment, in a fashion and textile context, can be considered an extraneous decorative process that has a significant detrimental impact on the environment. However, aesthetic and cultural theories, in addition to consumer appeal, show that it i... Read More about An exploration of the sustainable and aesthetic possibilities of 3D printing onto textiles as an alternative to traditional surface decoration.

Contesting colonial (hi)stories: (Post)colonial imaginings of South East Asia (2020)
Journal Article
Supartono, A., & Moschovi, A. (2020). Contesting colonial (hi)stories: (Post)colonial imaginings of South East Asia. Journal of Southeast Asian Studies, 51(3), 343-371. https://doi.org/10.1017/S0022463420000508

This article seeks to explore the impact of digital technologies upon the material, conceptual and ideological premises of the colonial archive in the digital era. This analysis is pursued though a discussion of creative work produced during an inter... Read More about Contesting colonial (hi)stories: (Post)colonial imaginings of South East Asia.

From Singapore with Nature (2018)
Book Chapter
Supartono, A. (2018). From Singapore with Nature

In 1819, when Stamford Raffles decided to turn the small fishing island at the Malacca strait into a trading port of British East India company, the future of Singapore was sealed.  Highly influenced by then the admirable Adam Smith and David Ricardo... Read More about From Singapore with Nature.

“From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs (2018)
Journal Article
Anastasiadou, C., & Vettese, S. (2019). “From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs. Tourism Management, 71, 428-442. https://doi.org/10.1016/j.tourman.2018.10.032

Souvenirs, whether mass-produced commodities made elsewhere or local artisanal handicrafts, are static objects that lack the capacity to mediate or generate the co-creative, active or immersive experiences that tourists desire. The expansion of addit... Read More about “From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs.

Learning from the locals: how can co-design support malaria education in a post-colonial environment? (2018)
Journal Article
MacLeod, M., & Macdonald, I. (2018). Learning from the locals: how can co-design support malaria education in a post-colonial environment?. Design for Health, 2(1), 163-185. https://doi.org/10.1080/24735132.2018.1451676

Designing for social good framed within an ethical practice has a long tradition informed by the democratic philosophy of John Dewey, but more recently it has been acknowledged that co-design can embody cultural respect and empathy through an express... Read More about Learning from the locals: how can co-design support malaria education in a post-colonial environment?.

Design Education without Borders: How Students Can Engage with a Socially Conscious Pedagogy as Global Citizens (2017)
Journal Article
Macdonald, I., & MacLeod, M. (2018). Design Education without Borders: How Students Can Engage with a Socially Conscious Pedagogy as Global Citizens. International Journal of Art and Design Education, 37(2), 312-324. https://doi.org/10.1111/jade.12117

This study examines the student experience of a third sector graphic design project in an international context. Inspired by a humanist and socially conscious perspective that was originally set out by Ken Garland's ‘First Things First’ manifesto in... Read More about Design Education without Borders: How Students Can Engage with a Socially Conscious Pedagogy as Global Citizens.

Stickers - Portfolio Artefact (2019)
Physical Artefact
MacLeod, M., & Macdonald, I. Stickers - Portfolio Artefact. [Stickers - Print]

Designing for social good framed within an ethical practice has a long tradition informed by the democratic philosophy of John Dewey, but more recently it has been acknowledged that co-design can embody cultural respect and empathy through an express... Read More about Stickers - Portfolio Artefact.

Edinburgh Zoo Night Trail
Report
Innes, M., & Winton, E. Edinburgh Zoo Night Trail. Edinburgh Zoological Society

No abstract available.

Gift From God (2019)
Physical Artefact
Macinnes, C. Gift From God

Screenplay development: from found footage to auto/ethnography: 1. Introduction In 2006 I discovered a home DV tape with footage of a hyper little girl and a strange couple on holiday in Ireland. Something about the footage seemed eerily construct... Read More about Gift From God.

Lighting Design Thinking (2015)
Presentation / Conference Contribution
Innes, M. (2015, November). Lighting Design Thinking

Public lecture to an audience of students and practicing professional designers, architects and artists.

Unconventional Lighting (2016)
Presentation / Conference Contribution
Innes, M. (2016, November). Unconventional Lighting

No abstract available.

Remanufactured Furniture Experiments aiming to minimise material loss and raw material addition – practical workshop at Zhengzhou University of Light Industry, Henan, China, February 2019 (2019)
Physical Artefact
Kerlaff, P., & Cairns, A. Remanufactured Furniture Experiments aiming to minimise material loss and raw material addition – practical workshop at Zhengzhou University of Light Industry, Henan, China, February 2019. [Photographs of furniture outputs, data set, written comments]

Remanufactured Furniture Experiments aiming to minimise material loss and raw material addition – practical workshop at Zhengzhou University of Light Industry, Henan, China, February 2019 This project aimed to identify strategies for adaptation to i... Read More about Remanufactured Furniture Experiments aiming to minimise material loss and raw material addition – practical workshop at Zhengzhou University of Light Industry, Henan, China, February 2019.

Narratives of Waste: an Exploration of material transformation through 3D printing (2019)
Presentation / Conference Contribution
Lambert, I. (2019, March). Narratives of Waste: an Exploration of material transformation through 3D printing. Presented at RTD2019 Method & Critique, Delft and Rotterdam

This practice-led workshop was aimed at exploring how Ocean Plastic 3D printing filament can be used to devise objects to make use of its particular material qualities and communicate the journey of the material from the initial object to remanufactu... Read More about Narratives of Waste: an Exploration of material transformation through 3D printing.

Sand Casting Portfolio 2015-2019 (2015)
Physical Artefact
Lambert, I. Sand Casting Portfolio 2015-2019. [Images]

The experimental aluminium sand-cast bowls shown in the attached portfolio are part of a practice-based auto-ethnographic heuristic research inquiry into knowledge in doing. John Dunnigan’s essay on Thinking (2013) describes practice-led/based resea... Read More about Sand Casting Portfolio 2015-2019.

Light-emitting Lace: a textile and lighting modular system (2016)
Physical Artefact
Taylor, S., Robertson, S., & Innes, M. (2018). Light-emitting Lace: a textile and lighting modular system. [Film, Adio]

Light-emitting Lace is a textile lighting proof of concept modular system comprising woven optical fibre and textile illuminator and the result of two, Textile Future Forum (TFF) Challenge Fund Awards to accelerate Scottish industry-led step change a... Read More about Light-emitting Lace: a textile and lighting modular system.

Lit Lace for Performance (2018)
Physical Artefact
Taylor, S. (2018). Lit Lace for Performance. [Lace]

With Robertson, I initiated, developed and led, Lit Lace for Performance, a culmination of cross-disciplinary collaborative work which explored the development of responsive smart textile backdrops for new display, projection and visual effects for t... Read More about Lit Lace for Performance.