Skip to main content

Research Repository

Advanced Search

Outputs (158)

Accuracy and reliability: a computational tool to minimise steel mass and carbon emissions at early-stage structural design (2018)
Journal Article
D’Amico, B., & Pomponi, F. (2018). Accuracy and reliability: a computational tool to minimise steel mass and carbon emissions at early-stage structural design. Energy and Buildings, 168, 236-250. https://doi.org/10.1016/j.enbuild.2018.03.031

Building structures often represent the element with the largest mass in a building project, with significant effects on the buildings life cycle environmental impacts. Amongst structural materials, steel is characterised by its suitability to a larg... Read More about Accuracy and reliability: a computational tool to minimise steel mass and carbon emissions at early-stage structural design.

Numerical and empirical evaluation of a novel building integrated collector storage solar water heater (2018)
Journal Article
Garnier, C., Muneer, T., & Currie, J. (2018). Numerical and empirical evaluation of a novel building integrated collector storage solar water heater. Renewable Energy, 126, 281-295. https://doi.org/10.1016/j.renene.2018.03.041

Integrated collector storage is a long established simple low cost solar water heater configuration combining the solar collector with a storage tank into a single unit. Previous studies have shown the potential of integrated collector storage solar... Read More about Numerical and empirical evaluation of a novel building integrated collector storage solar water heater.

Understanding the compatibility of UK resource for dowel laminated timber construction (2016)
Presentation / Conference Contribution
Plowas, W., Bell, T., Hairstans, R., & Williamson, J. B. (2016, June). Understanding the compatibility of UK resource for dowel laminated timber construction. Paper presented at Integrated Design Conference

Dowel Laminated Timber (DLT also know as Brettstapel) is a technique of constructing large-scale solid timber panels for use as structural or non-structural elements. The technique utilizes smaller sawn timber sections mechanically fixed together wit... Read More about Understanding the compatibility of UK resource for dowel laminated timber construction.

Study on the Impact of Size and Position of the Shear Field in Determining the Shear Modulus of Glulam Beam Using Photogrammetry Approach (2018)
Journal Article
Gharavi, N., & Zhang, H. (2018). Study on the Impact of Size and Position of the Shear Field in Determining the Shear Modulus of Glulam Beam Using Photogrammetry Approach. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 12(3), 194-198. https://doi.org/10.1999/1307-6892/10008636

The shear modulus of a timber beam can be determined using torsion test or shear field test method. The shear field test method is based on shear distortion measurement of the beam at the zone with the constant transverse load in the standardized fou... Read More about Study on the Impact of Size and Position of the Shear Field in Determining the Shear Modulus of Glulam Beam Using Photogrammetry Approach.

Mass Customisable Roofing Solutions for the New Build and Retrofit Markets in the UK (2018)
Presentation / Conference Contribution
Plowas, W., Hairstans, R., & Felingham, J. (2018). Mass Customisable Roofing Solutions for the New Build and Retrofit Markets in the UK. In MOC Summit Proceedings

Major house builders and contractors in the UK are seeking alternative solutions to form the structural frame of pitched roofs for various reasons; speed, health and safety, quality ease of use. They are exploring the use of offsite systems, which ar... Read More about Mass Customisable Roofing Solutions for the New Build and Retrofit Markets in the UK.

The merits of varying forms of mass timber products for offsite and modular construction (2018)
Presentation / Conference Contribution
Hairstans, R., Smith, R., & Wilson, P. (2018). The merits of varying forms of mass timber products for offsite and modular construction.

Mass timber is a family of Solid Laminate Timber Systems (SLTS) formed from smaller sections of timber connected by glue, mechanical fixings, moisture movement or a combination of methods. These products, which include Structural Composite Lumber, G... Read More about The merits of varying forms of mass timber products for offsite and modular construction.

Built Environmnet Episteology: Knowledge exchange through university-industry communities of practice (2017)
Presentation / Conference Contribution
Hairstans, R., & Smith, R. (2017, June). Built Environmnet Episteology: Knowledge exchange through university-industry communities of practice. Presented at Architecture of Complexity - Design, systems, society and environment, Salt Lake City, UT, USA

This paper explores the nature of knowledge through a history of knowledge production in society. It emphasizes the modes of knowledge including explicit and tacit and argues for knowledge management and knowledge transfer as strategies to both codif... Read More about Built Environmnet Episteology: Knowledge exchange through university-industry communities of practice.

Equipping ourselves for future forests and timber. (2018)
Presentation / Conference Contribution
Ridley-Ellis, D. (2018, May). Equipping ourselves for future forests and timber. Presented at Institute of Chartered Foresters National Conference

Presentation to the Institute of Chartered Foresters National Conference, "Innovation for change - New drivers for tomorrow’s forestry" Edinburgh 2-3 May 2013 https://www.charteredforesters.org/

Home grown timber now and in the future. (2017)
Presentation / Conference Contribution
Ridley-Ellis, D. (2017, November). Home grown timber now and in the future. Presented at WTS British Timber Seminar

Presentation to the wood technology society "British Timber Seminar" at IOM3, November 2017

Assessing timber quality. (2017)
Presentation / Conference Contribution
Ridley-Ellis, D. (2017, October). Assessing timber quality. Presented at 1st National Forestry and Aboriculture Student Conference, Moulton College, Moulton, Northamptonshire

Presentation about technology for assessing timber quality, at the Royal Forestry Society Future Foresters Technology Day (1st National Forestry and Aboriculture Student Conference)

Impulse excitation measurement of small changes in elastic moduli and damping using R (2018)
Journal Article
Ridley-Ellis, D., Libeau, M., & Mignerat, D. (2018). Impulse excitation measurement of small changes in elastic moduli and damping using R. International Wood Products Journal, 1-6. https://doi.org/10.1080/20426445.2018.1475928

Impulse excitation is commonly used to assess wood stiffness in both scientific and industrial settings. Modes of vibration are excited by a mechanical impulse and their resonant frequencies measured to calculate elastic moduli. It is also possible t... Read More about Impulse excitation measurement of small changes in elastic moduli and damping using R.

Why method matters: temporal, spatial and physical variations in LCA and their impact on choice of structural system (2018)
Journal Article
Moncaster, A., Pomponi, F., Symons, K., & Guthrie, P. (2018). Why method matters: temporal, spatial and physical variations in LCA and their impact on choice of structural system. Energy and Buildings, https://doi.org/10.1016/j.enbuild.2018.05.039

Life Cycle Assessment (LCA) is increasingly used as an early-stage design-decision tool to support choices of structural system. However LCA modellers must first make numerous methodological decisions, and the resultant wide variations in approach ar... Read More about Why method matters: temporal, spatial and physical variations in LCA and their impact on choice of structural system.

Thermal Performance through Heat Retention in Integrated Collector-Storage Solar Water Heaters: A Review (2018)
Journal Article
Saint, R. M., Garnier, C., Pomponi, F., & Currie, J. (2018). Thermal Performance through Heat Retention in Integrated Collector-Storage Solar Water Heaters: A Review. Energies, 11(6), 1615. https://doi.org/10.3390/en11061615

Solar thermal systems are a long-standing technology that is receiving increased attention, in terms of research and development, due to ambitious climate change targets and the need for renewable energy solutions. Integrated collector-storage solar... Read More about Thermal Performance through Heat Retention in Integrated Collector-Storage Solar Water Heaters: A Review.

Sustainable Communities Premanufactured from Wood (2018)
Presentation / Conference Contribution
Duncheva, M., Calcagno, C., & Hairstans, R. (2018, June). Sustainable Communities Premanufactured from Wood. Poster presented at Timber 2018

The UK produces high quantities of softwood timber through forestry plantations concentrated in Scotland, however this resource is currently under-used and its full potential for application in construction is still to be realized. However, the focus... Read More about Sustainable Communities Premanufactured from Wood.

Professionalism in digitally mediated project work (2012)
Journal Article
Jaradat, S., Whyte, J., & Luck, R. (2013). Professionalism in digitally mediated project work. Building Research and Information, 41(1), 51-59. https://doi.org/10.1080/09613218.2013.743398

Fieldwork in a major construction programme is used to examine what is meant by professionalism where large integrated digital systems are used to design, deliver, and maintain buildings and infrastructure. The increasing ‘professionalization’ of the... Read More about Professionalism in digitally mediated project work.

Automatic code compliance with multi-dimensional data fitting in a BIM context (2018)
Journal Article
Patlakas, P., Livingstone, A., Hairstans, R., & Neighbour, G. (2018). Automatic code compliance with multi-dimensional data fitting in a BIM context. Advanced engineering informatics, 38, 216-231. https://doi.org/10.1016/j.aei.2018.07.002

BIM-based tools can contribute to addressing some of the challenges faced by structural engineering practitioners. A BIM-based framework for the development of components that deliver Automatic Code Compliance (ACC) is presented. The structural desig... Read More about Automatic code compliance with multi-dimensional data fitting in a BIM context.

Strength grading of timber in the UK in 2018 (2018)
Presentation / Conference Contribution
Ridley-Ellis, D. (2018, June). Strength grading of timber in the UK in 2018. Paper presented at Timber 2018, London

This paper summarises the state-of-the-art of strength grading of UK-grown timber. It lists the following information along with the primary references: visual grading grades and strength class assignments; grading machines with approved settings for... Read More about Strength grading of timber in the UK in 2018.