Skip to main content

Research Repository

Advanced Search

Dr Pablo Jaen Sola's Outputs (32)

Evaluation and Structural Optimisation of 0.6 m Impulse Turbine in Dolphin Wave Energy Conversion Device Through Computational Fluid Dynamics and Generative Design (2024)
Journal Article
Szatkowski, S., Gonzalez Delgado, D., Jaen-Sola, P., & Oterkus, E. (2024). Evaluation and Structural Optimisation of 0.6 m Impulse Turbine in Dolphin Wave Energy Conversion Device Through Computational Fluid Dynamics and Generative Design. Journal of marine science and engineering, 12(12), Article 2259. https://doi.org/10.3390/jmse12122259

In this paper, the performance of an adapted design of a 0.6 m impulse turbine in a new wave energy conversion device—the Dolphin device—is evaluated. This study is focused on developing an optimised structure in order to maximise the potential of th... Read More about Evaluation and Structural Optimisation of 0.6 m Impulse Turbine in Dolphin Wave Energy Conversion Device Through Computational Fluid Dynamics and Generative Design.

A New Zero Waste Design for a Manufacturing Approach for Direct-Drive Wind Turbine Electrical Generator Structural Components (2024)
Journal Article
Gonzalez-Delgado, D., Jaen-Sola, P., & Oterkus, E. (2024). A New Zero Waste Design for a Manufacturing Approach for Direct-Drive Wind Turbine Electrical Generator Structural Components. Machines, 12(9), Article 643. https://doi.org/10.3390/machines12090643

An integrated structural optimization strategy was produced in this study for direct-drive electrical generator structures of offshore wind turbines, implementing a design for an additive manufacturing approach, and using generative design techniques... Read More about A New Zero Waste Design for a Manufacturing Approach for Direct-Drive Wind Turbine Electrical Generator Structural Components.

Aero-Servo-Elastic Simulation of the IEA 15MW Reference Wind Turbine for Direct Drive Generator Integrity Modelling (2024)
Presentation / Conference Contribution
Bichan, M., Jaen-Sola, P., Sellami, N., & Muhammad Sukki, F. (2024, June). Aero-Servo-Elastic Simulation of the IEA 15MW Reference Wind Turbine for Direct Drive Generator Integrity Modelling. Presented at 4th Annual Solar and Wind Power Conference, Edinburgh, UK

This paper presents the development of a full turbine model and subsequent aero-servo-elastic simulation of the IEA 15MW Reference Wind Turbine, such that aerodynamic loads can be obtained and then applied to a simplified drivetrain in Finite-Element... Read More about Aero-Servo-Elastic Simulation of the IEA 15MW Reference Wind Turbine for Direct Drive Generator Integrity Modelling.

Aero-Servo-Elastic Simulation of the International Energy Agency’s 15MW Reference Wind Turbine for Direct-Drive Generator Integrity Modelling (2024)
Presentation / Conference Contribution
Bichan, M., Jaen-Sola, P., Sellami, N., & Muhammad-Sukki, F. (2024, June). Aero-Servo-Elastic Simulation of the International Energy Agency’s 15MW Reference Wind Turbine for Direct-Drive Generator Integrity Modelling. Presented at ASWEC 2024: 4th Annual Conference Solar and Wind Power, Edinburgh

This paper presents the development of a full turbine model and subsequent aero-servo-elastic simulation of the IEA 15MW Reference Wind Turbine, such that aerodynamic loads can be obtained and then applied to a simplified drivetrain in Finite-Element... Read More about Aero-Servo-Elastic Simulation of the International Energy Agency’s 15MW Reference Wind Turbine for Direct-Drive Generator Integrity Modelling.

Generative Design and Additive Manufacturing Techniques on the Optimization of Multi-MW Offshore Direct-Drive Wind Turbine Electrical Generators (2024)
Presentation / Conference Contribution
Gonzalez-Delgado, D., Jaen-Sola, P., & Oterkus, E. (2024, June). Generative Design and Additive Manufacturing Techniques on the Optimization of Multi-MW Offshore Direct-Drive Wind Turbine Electrical Generators. Presented at ASWEC 2024: 4th Annual Conference Solar and Wind Power, Edinburgh

New advances in structural optimization techniques and manufacturing methods, such as generative design (GD) and additive manufacturing (AM), are revolutionizing the capabilities to generate high-efficiency and lightweight models in comparison with c... Read More about Generative Design and Additive Manufacturing Techniques on the Optimization of Multi-MW Offshore Direct-Drive Wind Turbine Electrical Generators.

Preface: The 4th Annual Conference Solar and Wind Power (2024)
Presentation / Conference Contribution
Sellami, N., Muhammad-Sukki, F., & Sola, P. (2024, June). Preface: The 4th Annual Conference Solar and Wind Power. Presented at ASWEC 2024: 4th Annual Conference on Solar and Wind Power, Edinburgh

Abstract not available.

A Generative Design Approach for the Dynamic Optimisation of Multi-MW Offshore Direct-Drive Wind Turbine Electrical Generator Supporting Structures Using Modal Analysis (2024)
Journal Article
Gonzalez-Delgado, D., Jaen-Sola, P., & Oterkus, E. (2024). A Generative Design Approach for the Dynamic Optimisation of Multi-MW Offshore Direct-Drive Wind Turbine Electrical Generator Supporting Structures Using Modal Analysis. Wind, 4(2), 172-189. https://doi.org/10.3390/wind4020009

Generative design techniques together with the rapid development of additive manufacturing represent a revolution in the field of structural optimisation processes. In this study, a static structural and modal analysis was integrated to drive a multi... Read More about A Generative Design Approach for the Dynamic Optimisation of Multi-MW Offshore Direct-Drive Wind Turbine Electrical Generator Supporting Structures Using Modal Analysis.

On the Integrity of Large-Scale Direct-Drive Wind Turbine Electrical Generator Structures: An Integrated Design Methodology for Optimisation, Considering Thermal Loads and Novel Techniques (2024)
Journal Article
Bichan, M., Jaen-Sola, P., Gonzalez-Delgado, D., & Oterkus, E. (2024). On the Integrity of Large-Scale Direct-Drive Wind Turbine Electrical Generator Structures: An Integrated Design Methodology for Optimisation, Considering Thermal Loads and Novel Techniques. Machines, 12(4), Article 277. https://doi.org/10.3390/machines12040277

With the rapid expansion of offshore wind capacity worldwide, minimising operation and maintenance requirements is pivotal. Regarded as a low-maintenance alternative to conventional drivetrain systems, direct-drive generators are increasingly commonp... Read More about On the Integrity of Large-Scale Direct-Drive Wind Turbine Electrical Generator Structures: An Integrated Design Methodology for Optimisation, Considering Thermal Loads and Novel Techniques.

A Stiffness Approach for Coupling Structural and Magnetic Models for the Sustainable Design, Optimisation and Real-Time Structural Integrity Assessment of Radial Flux Permanent Magnet Generators for Direct-Drive Wind Turbines (2024)
Journal Article
McDonald, A., & Jaen-Sola, P. (2024). A Stiffness Approach for Coupling Structural and Magnetic Models for the Sustainable Design, Optimisation and Real-Time Structural Integrity Assessment of Radial Flux Permanent Magnet Generators for Direct-Drive Wind Turbines. Sustainability, 16(6), Article 2393. https://doi.org/10.3390/su16062393

The mass of a direct-drive generator is often defined by the requirements for structural stiffness to meet the magnetic stiffness between the rotor and stator surfaces. This paper analyses this magnetic stiffness and estimates the structural stiffnes... Read More about A Stiffness Approach for Coupling Structural and Magnetic Models for the Sustainable Design, Optimisation and Real-Time Structural Integrity Assessment of Radial Flux Permanent Magnet Generators for Direct-Drive Wind Turbines.

A Stiffness Approach for Coupling Structural and Magnetic Models for the Design and Optimization of Radial Flux PM Generators for Sustainable Direct-Drive Wind Turbines (2024)
Preprint / Working Paper
McDonald, A., & Jaen-Sola, P. A Stiffness Approach for Coupling Structural and Magnetic Models for the Design and Optimization of Radial Flux PM Generators for Sustainable Direct-Drive Wind Turbines

The mass of a direct-drive generator is often defined by the requirements for structural stiffness to meet the magnetic stiffness between the rotor and stator surfaces. This paper analyses this magnetic stiffness and estimates the structural stiffnes... Read More about A Stiffness Approach for Coupling Structural and Magnetic Models for the Design and Optimization of Radial Flux PM Generators for Sustainable Direct-Drive Wind Turbines.

An Efficient Computational Analysis and Modelling of Transferred Aerodynamic Loading on Direct-Drive System of 5 MW Wind Turbine and Results Driven Optimisation for a Sustainable Generator Structure (2024)
Journal Article
Szatkowski, S., Jaen-Sola, P., & Oterkus, E. (in press). An Efficient Computational Analysis and Modelling of Transferred Aerodynamic Loading on Direct-Drive System of 5 MW Wind Turbine and Results Driven Optimisation for a Sustainable Generator Structure. Sustainability, 16(2), Article 545. https://doi.org/10.3390/su16020545

The study presents an efficient computational investigation on the behaviour of the direct-drive system integrated into the offshore 5 MW NREL wind turbine model under demanding aerodynamic loading conditions with the aim of optimising and developing... Read More about An Efficient Computational Analysis and Modelling of Transferred Aerodynamic Loading on Direct-Drive System of 5 MW Wind Turbine and Results Driven Optimisation for a Sustainable Generator Structure.

Simulation of a Solar Dryer for Use in Developing Countries (2023)
Presentation / Conference Contribution
Muhammad-Sukki, F., Abiola Oladimeji, A., Sola, P. J., See, C. H., Bani, N. A., Muhtazaruddin, M. N., Amran, M. E., & Ahmad Kamil, A. S. (2023, October). Simulation of a Solar Dryer for Use in Developing Countries. Presented at 2023 International Conference on Power and Renewable Energy Engineering, Tokyo, Japan

This paper examines the implementation of solar dryers in developing countries. Simulations were carried out using a simple model of a solar dryer to validate the drying process for various crops and fish products. The solar dryer simulator model in... Read More about Simulation of a Solar Dryer for Use in Developing Countries.

A Metal Selection and Structural Optimisation Methodology for Large-Scale Direct-Drive Wind Turbine Electrical Generators (2023)
Presentation / Conference Contribution
Bichan, M., Jaen-Sola, P., & Jack, A. (2023, October). A Metal Selection and Structural Optimisation Methodology for Large-Scale Direct-Drive Wind Turbine Electrical Generators. Presented at 12th International Conference on Power Electronics, Machines and Drives (PEMD 2023), Brussels, Belgium

With an ever-growing market share for offshore wind, direct-drive generators are touted as a low maintenance alternative to conventional drivetrains. However, to contend with higher torque requirements essential for low-speed operation, direct-drive... Read More about A Metal Selection and Structural Optimisation Methodology for Large-Scale Direct-Drive Wind Turbine Electrical Generators.

Full turbine modelling of the NREL 15MW reference wind turbine for the transient thermal and structural analyses of the direct -drive generator structure (2023)
Presentation / Conference Contribution
Bichan, M., Jaen-Sola, P., Sellami, N., & Muhammad Sukki, F. (2023, August). Full turbine modelling of the NREL 15MW reference wind turbine for the transient thermal and structural analyses of the direct -drive generator structure. Presented at SCEBE Research Degree Conference 2023, Edinburgh Napier University, Edinburgh

Towards an Integrated Design of Direct-Drive Wind Turbine Electrical Generator Supporting Structures (2023)
Journal Article
Touw, L., Jaen Sola, P., & Oterkus, E. (2023). Towards an Integrated Design of Direct-Drive Wind Turbine Electrical Generator Supporting Structures. Wind, 3(3), 343-360. https://doi.org/10.3390/wind3030020

Rotor and stator support structures of significant size and mass are required to withstand the considerable loads that direct-drive wind turbine electrical generators face to maintain an air-gap clearance that is open and stable. With the increase of... Read More about Towards an Integrated Design of Direct-Drive Wind Turbine Electrical Generator Supporting Structures.

Establishing the Importance of Operating Temperature in the Structural Integrity of Large-Scale Direct-Drive Wind Turbine Generators (2023)
Journal Article
Bichan, M., Jack, A., & Jaen-Sola, P. (2023). Establishing the Importance of Operating Temperature in the Structural Integrity of Large-Scale Direct-Drive Wind Turbine Generators. Machines, 11(8), Article 780. https://doi.org/10.3390/machines11080780

Direct-drive generators are recognised for their low maintenance compared with conventional drivetrains, largely due to their fewer working parts. However, consequent to low-speed operation, these machines necessitate large diameters and are subject... Read More about Establishing the Importance of Operating Temperature in the Structural Integrity of Large-Scale Direct-Drive Wind Turbine Generators.

Design and optimization of multi-MW offshore direct-drive wind turbine electrical generator structures using generative design techniques (2023)
Journal Article
Gonzalez-Delgado, D., Jaen-Sola, P., & Oterkus, E. (2023). Design and optimization of multi-MW offshore direct-drive wind turbine electrical generator structures using generative design techniques. Ocean Engineering, 280, Article 114417. https://doi.org/10.1016/j.oceaneng.2023.114417

The use of generative design as an alternative to typical structural optimization techniques opens the door to new methods of manufacturing. In this study, generative design techniques were used as an automated iterative process with an extensive set... Read More about Design and optimization of multi-MW offshore direct-drive wind turbine electrical generator structures using generative design techniques.

A Critical Evaluation of Large Scale Direct-Drive Wind Turbine Electrical Machines Manufacturing Techniques Considering Sustainability Aspects and Recyclability Issues (2022)
Presentation / Conference Contribution
Bichan, M., Jaen-Sola, P., & Jack, A. (2022, September). A Critical Evaluation of Large Scale Direct-Drive Wind Turbine Electrical Machines Manufacturing Techniques Considering Sustainability Aspects and Recyclability Issues. Presented at Future Electrical Machines Manufacturing Hub Conference 2022, Sheffield, UK

Portable Solar Kiln (2022)
Report
Kinsley, A., Muhammad Sukki, F., Sola, P., Sellami, N., See, C. H., & Papadopoulos, S. (2022). Portable Solar Kiln. Edinburgh Napier University

The aim of this project is to determine an optimum design and setup for a solar kiln. Throughout this project the overall design of the container will be addressed along with smaller internal setups that can be made. For the overall design optimising... Read More about Portable Solar Kiln.