Skip to main content

Research Repository

Advanced Search

All Outputs (5036)

Permeability of stressed concrete: Steady‐state method of measuring permeability of hardened concrete studies in relation to the change in structure of concrete under various short‐term stress levels (1991)
Journal Article
Kermani, A. (1991). Permeability of stressed concrete: Steady‐state method of measuring permeability of hardened concrete studies in relation to the change in structure of concrete under various short‐term stress levels. Building research and informat

Abdy Kermani of the Structural Research Group at the Department of Civil Engineering, Napier Polytechnic of Edinburgh, found that permeability increases with increase in applied stress level depending on the type of the mix and the magnitude of the a... Read More about Permeability of stressed concrete: Steady‐state method of measuring permeability of hardened concrete studies in relation to the change in structure of concrete under various short‐term stress levels.

Performance of Nailed Gusset Joints in Ridged Timber Portals (1991)
Journal Article
Kermani, A., & Lee, B. S. (1991). Performance of Nailed Gusset Joints in Ridged Timber Portals. International Journal of Forest Engineering, 3(1), 13-28. https://doi.org/10.1080/08435243.1991.10702630

Abstract The structural behaviour and performance of nailed plywood gusset knee joints of timber portal frames are investigated. An analytical study has shown, and experimental study has confirmed, that the behaviour of the joints in terms of streng... Read More about Performance of Nailed Gusset Joints in Ridged Timber Portals.

Broadcasting Communication Systems. (1991)
Book Chapter
Bielefeldt, C. (1991). Broadcasting Communication Systems. In Concise Encyclopedia of Traffic & Transportation Systems. Pergammon

A vapour phase preservative treatment of manufactured wood based board materials (1989)
Journal Article
Murphy, R. J., & Turner, P. (1989). A vapour phase preservative treatment of manufactured wood based board materials. Wood science and technology, 23(3), 273-279. https://doi.org/10.1007/bf00367740

The preservative treatment of four different wood based board materials using an esterified borate applied in the vapour phase was investigated. Under optimum conditions complete impregnation via the board faces was achieved in all boards treated. Bo... Read More about A vapour phase preservative treatment of manufactured wood based board materials.

Influence of containing walls on the distribution of voidage in packed beds of uniform spheres (1988)
Journal Article
Kubie, J. (1988). Influence of containing walls on the distribution of voidage in packed beds of uniform spheres. Chemical Engineering Science, 43(6), 1403-1405. https://doi.org/10.1016/0009-2509%2888%2985113-3

The distribution of voidage in the wall regions of randomly packed beds of uniform spheres is investigated. A general equation relating the local voidage to the distribution of the spheres is derived and is combined with some simple observations abou... Read More about Influence of containing walls on the distribution of voidage in packed beds of uniform spheres.

Steady-state conduction in stagnant beds of solid particles (1987)
Journal Article
Kubie, J. (1987). Steady-state conduction in stagnant beds of solid particles. International Journal of Heat and Mass Transfer, 30(5), 937-947. https://doi.org/10.1016/0017-9310%2887%2990012-3

A model is developed for predicting the influence of the containing walls on heat transfer processes in stagnant beds of solid particles. The model describes the effect of the walls on the mean voidage of the bed and on the mean effective thermal con... Read More about Steady-state conduction in stagnant beds of solid particles.

Heat transfer between gas fluidized beds and immersed surfaces (1985)
Journal Article
Kubie, J. (1985). Heat transfer between gas fluidized beds and immersed surfaces. International Journal of Heat and Mass Transfer, 28(7), 1345-1353. https://doi.org/10.1016/0017-9310%2885%2990165-6

Various models of heat transfer between the emulsion phase of a gas fluidized bed and immersed surfaces are discussed. It is shown that certain features of these models, such as the contact resistance or a gas film between the surface and the solid p... Read More about Heat transfer between gas fluidized beds and immersed surfaces.

Axisymmetric outflow from large vessels (1984)
Journal Article
Kubie, J. (1984). Axisymmetric outflow from large vessels. Proceedings of the Institution of Mechanical Engineers. Part A, Power and process engineering, 198(5), 113-119. https://doi.org/10.1243/pime_proc_1984_198_016_02

A model of axisymmetric liquid outflow from large vessels is developed and is used to explain aspects of flow for self-venting and choked outlets. It is shown that for flows with self-venting outlets the model relates the liquid level to the flow. It... Read More about Axisymmetric outflow from large vessels.

Performance and design of plug‐type check valves (1982)
Journal Article
Kubie, J. (1982). Performance and design of plug‐type check valves. Proceedings / Institution of Mechanical Engineers, 196(1982), 47-56. https://doi.org/10.1243/pime_proc_1982_196_006_02

Plug check valves are frequently used in high pressure systems where parallel pump operations are envisaged, in order to prevent flow recirculation through the out-of-service pump. Serious operational problems are sometimes encountered with these val... Read More about Performance and design of plug‐type check valves.

Aspects of Outflow From Large Vessels. (1980)
Journal Article
Kubie, J., & Oates, H. S. (1980). Aspects of Outflow From Large Vessels. Journal of Fluids Engineering, 102(3), 324-329. https://doi.org/10.1115/1.3240689

An investigation has been made of flow phenomena associated with outflow from large horizontal cylindrical vessels with a vortex-free outlet on their bottom surface. This paper concentrates on the flow regimes and the variation of the level in the ve... Read More about Aspects of Outflow From Large Vessels..

Settling velocity of droplets in turbulent flows (1980)
Journal Article
Kubie, J. (1980). Settling velocity of droplets in turbulent flows. Chemical Engineering Science, 35(8), 1787-1794. https://doi.org/10.1016/0009-2509%2880%2985016-0

Two parameters of particle or droplet dynamics which are of importance in describing their behaviour in turbulent pipe flows are their settling velocity and eddy diffusivity. It is usually assumed that the settling velocity in turbulent flow is equal... Read More about Settling velocity of droplets in turbulent flows.

Two-phase steam-water flow through Y-junctions (1979)
Journal Article
Kubie, J., & Oates, H. (1979). Two-phase steam-water flow through Y-junctions. International Journal of Heat and Fluid Flow, 1(4), 161-167. https://doi.org/10.1016/0142-727x%2879%2990004-3

An investigation has been made of steam-water flow in a vertical coplanar Y-junctions which are used, for example, in the condensate carrying pipework downstream of direct contact heat exchangers. The steam-water flow is stratified in the sloping lim... Read More about Two-phase steam-water flow through Y-junctions.

The presence of slug flow in horizontal two-phase flow (1979)
Journal Article
Kubie, J. (1979). The presence of slug flow in horizontal two-phase flow. International Journal of Multiphase Flow, 5(5), 327-339. https://doi.org/10.1016/0301-9322%2879%2990011-9

One of the flow regimes occurring in horizontal two-phase flows is characterized by periodic large waves “surging” along the tube. This flow, called “slug” flow, has been frequently observed in low and high pressure gas liquid systems, but it has bee... Read More about The presence of slug flow in horizontal two-phase flow.