Skip to main content

Research Repository

Advanced Search

All Outputs (416)

History on the Cusp of Myth: J.T.Rogers' Oslo (2018)
Journal Article
Soto-Morettini, D. (2018). History on the Cusp of Myth: J.T.Rogers' Oslo. Journal of Contemporary Drama in English, 6(2), 315-330. https://doi.org/10.1515/jcde-2018-0028

J.T. Rogers’ Oslo has had an extraordinary run for new ‘straight’ drama: sell-out performances both in New York and London, and 7 Tony nominations. But what is it? On the face of it, Oslo is a history play – a carefully imagined reconstruction of sec... Read More about History on the Cusp of Myth: J.T.Rogers' Oslo.

“From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs (2018)
Journal Article
Anastasiadou, C., & Vettese, S. (2019). “From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs. Tourism Management, 71, 428-442. https://doi.org/10.1016/j.tourman.2018.10.032

Souvenirs, whether mass-produced commodities made elsewhere or local artisanal handicrafts, are static objects that lack the capacity to mediate or generate the co-creative, active or immersive experiences that tourists desire. The expansion of addit... Read More about “From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs.

A study of childrens' relationship with making and use of CAD in collaborative, physical and digital environments : implications for learning and open access fabrication (2018)
Journal Article
Vettese, S., Allan, D., & Thompson, P. (2018). A study of childrens' relationship with making and use of CAD in collaborative, physical and digital environments : implications for learning and open access fabrication. Design and Technology Education: An International Journal, 23(3), 10-25

In this paper, the researchers will investigate different ways in which school age, 'generation net' children learn, through non-linear, mediated, collaborative ‘making’ environments, enabled by online communities of ‘citizen practitioners' and maker... Read More about A study of childrens' relationship with making and use of CAD in collaborative, physical and digital environments : implications for learning and open access fabrication.

Textile applications of commercial photochromic dyes: part 7. A statistical investigation of the influence of photochromic dyes on the mechanical properties of thermoplastic fibres (2018)
Journal Article
Younes, B., Ward, S. C., Christie, R. M., & Vettese, S. (2019). Textile applications of commercial photochromic dyes: part 7. A statistical investigation of the influence of photochromic dyes on the mechanical properties of thermoplastic fibres. Journal of the Textile Institute, 110(5), 1-11. https://doi.org/10.1080/00405000.2018.1526444

The influence of the concentration of a commercial photochromic dye, incorporated into as-spun and drawn fibres produced from polyethylene and polypropylene, on their mechanical properties was investigated. As-spun fibres were produced by incorporati... Read More about Textile applications of commercial photochromic dyes: part 7. A statistical investigation of the influence of photochromic dyes on the mechanical properties of thermoplastic fibres.

Music as an Element of Narration in Poetic Documentaries (2018)
Journal Article
Stutterheim, K. (2018). Music as an Element of Narration in Poetic Documentaries. New Soundtrack, 8(2), 103-117. https://doi.org/10.3366/sound.2018.0124

Music, sound and rhythm, as aesthetic means of design, have been part of the tradition of poetic documentary film from its early history. This paper discusses various examples of this genre, all of which use soundscapes, sound design, and music. Musi... Read More about Music as an Element of Narration in Poetic Documentaries.

Early English Viols: Instruments, Makers and Music. By Michael Fleming and John Bryan (2018)
Journal Article
Durkin, R. (2018). Early English Viols: Instruments, Makers and Music. By Michael Fleming and John Bryan. Music and Letters, 99(3), 477-478. https://doi.org/10.1093/ml/gcy082

‘Which viols are held in great esteem these days? The very old English ones’, stated Philipp Eisel in his Musicus Autodidaktos of 1738. Eisel’s comment underlined the general sentiment held for these grandes dames of sixteenth- and seventeenth-centur... Read More about Early English Viols: Instruments, Makers and Music. By Michael Fleming and John Bryan.

From diplomacy backed by force to force backed by diplomacy: A comparative look at the Bosnia And Kosovo peace talks (2018)
Journal Article
Kocic, A. (2018). From diplomacy backed by force to force backed by diplomacy: A comparative look at the Bosnia And Kosovo peace talks. Balkania : revista de estudios balcánicos, 1(8), 179-199

This paper takes a closer look at the Bosnia and Kosovo peace talks and attempts to analyze why the former was a success and the letter a failure in terms of ending war. This is done through the prism of the three main theoretical approaches in IR -... Read More about From diplomacy backed by force to force backed by diplomacy: A comparative look at the Bosnia And Kosovo peace talks.

Social Remembering, Disenchantment and First World War Literature, 1918–1930 (2018)
Journal Article
Frayn, A. (2018). Social Remembering, Disenchantment and First World War Literature, 1918–1930. Journal of War and Culture Studies, 11(3), 192-208. https://doi.org/10.1080/17526272.2018.1490072

The way that the First World War would be remembered was yet to be solidified in the years immediately after the Armistice and peace treaties. Using key case studies from the years 1918 to 1930 by combatant authors Gilbert Frankau, Ernest Raymond, C... Read More about Social Remembering, Disenchantment and First World War Literature, 1918–1930.

Introduction: War and Memory (2018)
Journal Article
Frayn, A., & Phillips, T. (2018). Introduction: War and Memory. Journal of War and Culture Studies, 11(3), 181-191. https://doi.org/10.1080/17526272.2018.1490075

This introduction situates the articles in this journal issue within recent scholarship about war and memory. The plethora of available terminology is addressed, tracing memory studies back to the rediscovery of Maurice Halbwachs’s theories of colle... Read More about Introduction: War and Memory.

In Situ, 3D Printed Heritage Souvenirs: Challenging Conventional Spaces and Culture (2018)
Journal Article
Vettese, S., & Anastasiadou, C. (2018). In Situ, 3D Printed Heritage Souvenirs: Challenging Conventional Spaces and Culture. The Journal of Peer Production, 12, 27-39

This paper outlines an Arts and Humanities Research Council (AHRC) funded Design Innovation Development Award project titled ' Enhancing the Authenticity and Sustainability of the Visitor Heritage Experience through 3D Printing Technology', undertake... Read More about In Situ, 3D Printed Heritage Souvenirs: Challenging Conventional Spaces and Culture.

‘An otherness that cannot be sublimated’: Shades of Frankenstein in Penny Dreadful and Black Mirror (2018)
Journal Article
Artt, S. (2018). ‘An otherness that cannot be sublimated’: Shades of Frankenstein in Penny Dreadful and Black Mirror. Science Fiction Film and Television, 11(2), 257-275. https://doi.org/10.3828/sfftv.2018.18

This article traces some of the legacies of the Frankenstein narrative as it appears in the television series Penny Dreadful and Black Mirror. Both series deploy Frankenstein themes to explore the relationship between gender and technology. Drawing o... Read More about ‘An otherness that cannot be sublimated’: Shades of Frankenstein in Penny Dreadful and Black Mirror.

Consumer Intervention Mapping - A Tool for Designing Future Product Strategies within Circular Product Service Systems (2018)
Journal Article
Sinclair, M., Sheldrick, L., Moreno, M., & Dewberry, E. (2018). Consumer Intervention Mapping - A Tool for Designing Future Product Strategies within Circular Product Service Systems. Sustainability, 10(6), Article 2088. https://doi.org/10.3390/su10062088

Re-distributed manufacturing presents a number of opportunities and challenges for New Product Development in a future Circular Economy. It has been argued that small-scale, flexible and localised production systems will reduce resource consumption,... Read More about Consumer Intervention Mapping - A Tool for Designing Future Product Strategies within Circular Product Service Systems.

Introduction (2018)
Journal Article
Gower, M., & Kerlaff, P. (2018). Introduction. IE: Studio, 2, 2-3

Gaelic Television: Building Bricks without Straw (2018)
Journal Article
Maclean, D. (2018). Gaelic Television: Building Bricks without Straw. International Journal of Scottish Theatre and Screen, 11(1), 6-28

This article considers the role and place of Gaelic television output looking at how Gaelic content was delivered prior to the creation of BBC Alba in 2008 and up to the present day. It compares the contradictory way in which it is has been viewed ex... Read More about Gaelic Television: Building Bricks without Straw.

STV At 60 (2018)
Journal Article
Scott, A. (2018). STV At 60. International Journal of Scottish Theatre and Screen, 11(1), 29-50

This article traces the history of Scottish Television (STV) since it was first established as the independent television channel serving central Scotland in 1957 by charting the company’s landmark productions across a range of genres made for both S... Read More about STV At 60.

Strain sensing characteristics of 3D‐printed conductive plastics (2018)
Journal Article
McGhee, J., Sinclair, M., Southee, D., & Wijayantha, U. (2018). Strain sensing characteristics of 3D‐printed conductive plastics. Electronics Letters, 54(9), 570-572. https://doi.org/10.1049/el.2018.0363

Three types of commercially available conductive three-dimensional (3D) printing filament are electrically characterised for use in 3D-printed functional devices. The three plastics were carbon dispersed acrylonitrile butadiene styrene, carbon disper... Read More about Strain sensing characteristics of 3D‐printed conductive plastics.

3D-printing ‘Ocean plastic’–Fostering childrens’ engagement with sustainability (2018)
Journal Article
Vones, K., Allan, D., Lambert, I., & Vettese, S. (2018). 3D-printing ‘Ocean plastic’–Fostering childrens’ engagement with sustainability. Materials Today Communications, 16, 56-59. https://doi.org/10.1016/j.mtcomm.2018.04.001

Ocean plastic pollution has been identified as one of the biggest environmental threats of our time. As large islands of plastic waste such as the Pacific Gyre amass through the forces of intercontinental currents (Law et al., 2010), remote beaches i... Read More about 3D-printing ‘Ocean plastic’–Fostering childrens’ engagement with sustainability.