Offsite Ready Booklets
(2020)
Report
Duncheva, M., Calcagno, C., Henquel, V., Leitch, K., Stinson, J., Plant O'Toole, E., Bros-Williamson, J., Livingstone, A., De Saint-Sernin, A., Hairstans, R., Hillier, J., Bentley, A., Barran, R., Avins, L., Setiati, D., Richards, L., & Ferriz-Papi, J. A. (2020). Offsite Ready Booklets. Edinburgh: Construction Industry Training Board
All Outputs (69)
Refocusing modern methods of construction on the climate emergency: a 'five capitals' model for action (2020)
Journal Article
Campbell, A., Hairstans, R., & Jones, G. (2020). Refocusing modern methods of construction on the climate emergency: a 'five capitals' model for action. The structural engineer : journal of the Institution of Structural Engineers, 98(9), 22-28Adrian Campbell, Robert Hairstans and Giulia Jones explain how natural, human, social, manufactured and economic capital can all benefit from a sustainability-focused approach to off -site manufacturing.
Increasing offsite housing construction in Scotland: An evidence base to support new policy and systems (2020)
Report
Mora, L., Deakin, M., Reid, A., Hairstans, R., Duncheva, M., Calcagno, C., Smith, M., Smith, P., & Lang, V. (2020). Increasing offsite housing construction in Scotland: An evidence base to support new policy and systems. Construction Scotland Innovation Centre, Scottish Enterprise. and the Scottish GovernmentThe purpose of this project is to provide evidence of the potential contribution offsite construction offers to address the challenges faced by the affordable housing sector in Scotland. Funding for the project is drawn from the Construction Scotland... Read More about Increasing offsite housing construction in Scotland: An evidence base to support new policy and systems.
Off-site and industrialised timber construction (2019)
Book
Hairstans, R. (2019). Off-site and industrialised timber construction. (2nd). BMTRADAMany prefer the versatility of timber frame for panelised, volumetric and hybrid built off-site systems. Other suitable methods include timber post and beam, ‘mass’ construction using cross-laminated timber, and structural insulated panel systems. By... Read More about Off-site and industrialised timber construction.
Timber products for retrofit in the UK – market potential, applications analysis and next steps (2019)
Presentation / Conference Contribution
Duncheva, D. M., Calcagno, C., & Hairstans, P. R. (2019, September). Timber products for retrofit in the UK – market potential, applications analysis and next steps. Presented at Seminar on wood products in the round, Wood Technology Society of IOM3, organised by Daniel Ridley-Ellis, Edinburgh
The Quality Assurance of Tulipwood Cross Laminated Timber (CLT) for "Multi-Ply" (2019)
Journal Article
Hairstans, R., Plowas, W., Calcagno, C., & Milne, M. (2019). The Quality Assurance of Tulipwood Cross Laminated Timber (CLT) for "Multi-Ply". Wood Design Focus, 29(2), 20-26This paper presents the findings from the supply chain integration, pilot manufacture and quality assurance assessment of CLT made out of hardwood species, Tulipwood. The research was carried out as part of the American Hardwood Export Council indust... Read More about The Quality Assurance of Tulipwood Cross Laminated Timber (CLT) for "Multi-Ply".
Core off-site manufacture industry drivers. (2019)
Book Chapter
Hairstans, R., & Duncheva, T. (2019). Core off-site manufacture industry drivers. In J. S. Goulding, & F. P. Rahimian (Eds.), Offsite Production and Manufacturing for Innovative Construction: People, Process and Technology. Taylor & FrancisThe manufacture and pre-assembly of components, elements or modules offsite before installation into their final location are evident throughout construction history. Medieval carpenters’ pre-manufacturing the frames of buildings in their yards to en... Read More about Core off-site manufacture industry drivers..
Automatic code compliance with multi-dimensional data fitting in a BIM context (2018)
Journal Article
Patlakas, P., Livingstone, A., Hairstans, R., & Neighbour, G. (2018). Automatic code compliance with multi-dimensional data fitting in a BIM context. Advanced engineering informatics, 38, 216-231. https://doi.org/10.1016/j.aei.2018.07.002BIM-based tools can contribute to addressing some of the challenges faced by structural engineering practitioners. A BIM-based framework for the development of components that deliver Automatic Code Compliance (ACC) is presented. The structural desig... Read More about Automatic code compliance with multi-dimensional data fitting in a BIM context.
Sustainable Communities Premanufactured from Wood (2018)
Presentation / Conference Contribution
Duncheva, M., Calcagno, C., & Hairstans, R. (2018, June). Sustainable Communities Premanufactured from Wood. Poster presented at Timber 2018The UK produces high quantities of softwood timber through forestry plantations concentrated in Scotland, however this resource is currently under-used and its full potential for application in construction is still to be realized. However, the focus... Read More about Sustainable Communities Premanufactured from Wood.
Mass Timber - an introduction to solid laminate timber systems (2018)
Book
Hairstans, R. (2018). Mass Timber - an introduction to solid laminate timber systems. Arcamedia LtdThe past two decades have witnessed an extraordinary upsurge in the use of mass timber products and systems in construction - a global phenomenon driven by greater emphasis on the sustainable use of renewable resources and by significant technologica... Read More about Mass Timber - an introduction to solid laminate timber systems.
Timber Frame Workbooks Manufacturing: Knowledge, Practical Skills and Health & Safety (2017)
Other
Duncheva, T., Milne, M., & Hairstans, R. (2017). Timber Frame Workbooks Manufacturing: Knowledge, Practical Skills and Health & Safety. [Workbook]. EdinburghNo abstract available.
Timber Frame Workbooks Design: Knowledge, Practical Skills and Health and Safety (2017)
Other
Duncheva, M., Milne, M., & Hairstans, R. (2017). Timber Frame Workbooks Design: Knowledge, Practical Skills and Health and Safety. [Workbook]. EdinburghNo abstract available.
Offsite HUB (Scotland): establishing a collaborative regional framework for knowledge exchange in the UK (2017)
Journal Article
Hairstans, R., & Smith, R. E. (2017). Offsite HUB (Scotland): establishing a collaborative regional framework for knowledge exchange in the UK. Architectural Engineering and Design Management, 13, 1-18. https://doi.org/10.1080/17452007.2017.1314858The UK is set to become Europe’s largest construction market by 2030. However, UK construction productivity performance is regarded as weak, with low skills levels considered to be a key contributory factor. Consequently, off-site construction has be... Read More about Offsite HUB (Scotland): establishing a collaborative regional framework for knowledge exchange in the UK.
A Scottish perspective on timber offsite construction (2017)
Book Chapter
Hairstans, R., & Sanna, F. (2017). A Scottish perspective on timber offsite construction. In Offsite Architecture: Constructing the future. RoutledgeThis Chapter exemplifies the recent advancements in Scottish offsite construction through the research work carried out at the Centre for Offsite Construction + Innovative Structures (COCIS) at Edinburgh Napier University, Institute for Sustainable C... Read More about A Scottish perspective on timber offsite construction.
Retrofit Scotland: Howden Hall Road, Edinburgh (2016)
Digital Artefact
Hairstans, R. (2016). Retrofit Scotland: Howden Hall Road, EdinburghThis 1930s Bungalow which has been completely upgraded, enhanced and extended employing offsite and modern methods of construction (MMC), renewable technologies, and innovative products - See more at: http://www.retrofitscotland.org/case-studies/howd... Read More about Retrofit Scotland: Howden Hall Road, Edinburgh.
Structural Timber Systems (2016)
Presentation / Conference Contribution
Hairstans, R. (2016, September). Structural Timber Systems. Presented at CPD Seminar Structural Timber EngineeringTimber products and systems including solid laminate timber systems, dowel-lam, nail-lam, and cross-laminated timber.
Understanding the compatibility of UK resource for dowel laminated timber construction (2016)
Presentation / Conference Contribution
Plowas, W., Bell, T., Hairstans, R., & Williamson, J. B. (2016, June). Understanding the compatibility of UK resource for dowel laminated timber construction. Paper presented at Integrated Design ConferenceDowel Laminated Timber (DLT also know as Brettstapel) is a technique of constructing large-scale solid timber panels for use as structural or non-structural elements. The technique utilizes smaller sawn timber sections mechanically fixed together wit... Read More about Understanding the compatibility of UK resource for dowel laminated timber construction.
Taking timber beyond traditional boundaries. (2016)
Book Chapter
Hairstans, R. (2016). Taking timber beyond traditional boundaries. In TRADA timber industry yearbook 2016. High Wycombe, Buckinghamshire: Exova BM TRADATimber is a natural, hygroscopic, anisotropic material that must be properly understood if it is to be used efficiently within the built environment. With good silvicultural practices timber can be sourced responsibly and converted (with relatively l... Read More about Taking timber beyond traditional boundaries..
Building offsite. (2016)
Journal Article
Hairstans, R. (2016). Building offsite. Journal of the National Institute of Building Sciences, 4,This article explores the international adoption of offsite construction and why there is an overall impetus for growth across the global sector. The 4 main overarching categories of Offsite are considered explaining the key terminologies. Based on... Read More about Building offsite..
Building offsite: an introduction. (2015)
Report
Hairstans, R. (2015). Building offsite: an introduction. Edinburgh, Scotland: UK Commission for Employment and Skills (UKCES)An introduction to Building Offsite. Funded by the UK Commission for Employment and Skills (UKCES). The content was produced by an industry and academic collaboration of CCG (OSM), Stewart Milne Timber Systems, Edinburgh Napier University and Heriot... Read More about Building offsite: an introduction..