All Outputs (27)

A Lightweight Approach for Airborne Wind Turbine Drivetrains
Presentation / Conference Contribution
Jaen Sola, P., Mcdonald, A. S., & Oterkus, E. (2015, November). A Lightweight Approach for Airborne Wind Turbine Drivetrains. Presented at European Wind Energy Association, EWEA 2015

Buoyant airborne wind turbines are devices capable of harnessing stronger winds at higher altitudes and with their automated and rapidly deployable system they are suited to niche applications such as emergency power generation. Although much of the... Read More about A Lightweight Approach for Airborne Wind Turbine Drivetrains.

Structural Analysis and Characterization of Radial Flux PM Generators for Direct-Drive Wind Turbines
Presentation / Conference Contribution
Jaen-Sola, P., & McDonald, A. S. (2014, September). Structural Analysis and Characterization of Radial Flux PM Generators for Direct-Drive Wind Turbines. Presented at 3rd Renewable Power Generation Conference (RPG 2014), Naples, Italy

Wind turbine direct-drive generator structures are analysed in order to optimise and reduce mass. A method for modelling key stiffness parameters including a magnetic air-gap stiffness is outlined. Different approaches are used to parametrically calc... Read More about Structural Analysis and Characterization of Radial Flux PM Generators for Direct-Drive Wind Turbines.

Adaptive Dynamic Control of a Wind Generator
Presentation / Conference Contribution
Jaen-Sola, P., Anaya-Lara, O., & Dominguez-Navarro, J. A. (2013, September). Adaptive Dynamic Control of a Wind Generator. Presented at 9th EAWE PhD seminar in Wind Energy in Europe, Uppsala University Campus Gotland, Sweden

The main aim of the present project is to obtain a better understanding of the dynamic control of a wind turbine. To accomplish this, an adaptive dynamic controller was developed and connected to a wind DFIG Simulink model. In order to demonstrate th... Read More about Adaptive Dynamic Control of a Wind Generator.

Simulation of a Solar Dryer for Use in Developing Countries
Presentation / Conference Contribution
Muhammad-Sukki, F., Abiola Oladimeji, A., Sola, P. J., See, C. H., Bani, N. A., Muhtazaruddin, M. N., Amran, M. E., & Ahmad Kamil, A. S. (2023, October). Simulation of a Solar Dryer for Use in Developing Countries. Presented at 2023 International Conference on Power and Renewable Energy Engineering, Tokyo, Japan

This paper examines the implementation of solar dryers in developing countries. Simulations were carried out using a simple model of a solar dryer to validate the drying process for various crops and fish products. The solar dryer simulator model in... Read More about Simulation of a Solar Dryer for Use in Developing Countries.

Preface: The 4th Annual Conference Solar and Wind Power
Presentation / Conference Contribution
Sellami, N., Muhammad-Sukki, F., & Sola, P. (2024, June). Preface: The 4th Annual Conference Solar and Wind Power. Presented at ASWEC 2024: 4th Annual Conference on Solar and Wind Power, Edinburgh

Abstract not available.

Aero-Servo-Elastic Simulation of the International Energy Agency’s 15MW Reference Wind Turbine for Direct-Drive Generator Integrity Modelling
Presentation / Conference Contribution
Bichan, M., Jaen-Sola, P., Sellami, N., & Muhammad-Sukki, F. (2024, June). Aero-Servo-Elastic Simulation of the International Energy Agency’s 15MW Reference Wind Turbine for Direct-Drive Generator Integrity Modelling. Presented at ASWEC 2024: 4th Annual Conference Solar and Wind Power, Edinburgh

This paper presents the development of a full turbine model and subsequent aero-servo-elastic simulation of the IEA 15MW Reference Wind Turbine, such that aerodynamic loads can be obtained and then applied to a simplified drivetrain in Finite-Element... Read More about Aero-Servo-Elastic Simulation of the International Energy Agency’s 15MW Reference Wind Turbine for Direct-Drive Generator Integrity Modelling.

Generative Design and Additive Manufacturing Techniques on the Optimization of Multi-MW Offshore Direct-Drive Wind Turbine Electrical Generators
Presentation / Conference Contribution
Gonzalez-Delgado, D., Jaen-Sola, P., & Oterkus, E. (2024, June). Generative Design and Additive Manufacturing Techniques on the Optimization of Multi-MW Offshore Direct-Drive Wind Turbine Electrical Generators. Presented at ASWEC 2024: 4th Annual Conference Solar and Wind Power, Edinburgh

New advances in structural optimization techniques and manufacturing methods, such as generative design (GD) and additive manufacturing (AM), are revolutionizing the capabilities to generate high-efficiency and lightweight models in comparison with c... Read More about Generative Design and Additive Manufacturing Techniques on the Optimization of Multi-MW Offshore Direct-Drive Wind Turbine Electrical Generators.