Skip to main content

Research Repository

Advanced Search

All Outputs (17)

Viscoelastic and Mechanical Properties of Multi-layered Graphene Polyester Composites (2016)
Presentation / Conference Contribution
Saharudin, M., Shyha, I., & Inam, F. (2016). Viscoelastic and Mechanical Properties of Multi-layered Graphene Polyester Composites. In ICAME2016 - 2nd International Conference on Advances in Mechanical Engineering

In this study, multi-layered-graphene (MLG) reinforced unsaturated polyester (UP) were prepared by adding different weight percentage of graphene in polyester resin and subsequently cross linked using mixture of methyl ethyl ketone peroxide. The mech... Read More about Viscoelastic and Mechanical Properties of Multi-layered Graphene Polyester Composites.

Effect of cutting tools and working conditions on the machinability of TI-6AL-4V using vegetable oil-based cutting fluids (2016)
Presentation / Conference Contribution
Gariani, S., Shyha, I., & Inam, F. (2016, May). Effect of cutting tools and working conditions on the machinability of TI-6AL-4V using vegetable oil-based cutting fluids. Paper presented at International Conference on Advances in Mechanical Engineering, I

The cutting of titanium alloys is usually associated with low productivity, poor surface quality, short tool life and high machining costs. This is due to the excessive generation of heat in the cutting zone and difficulties in heat dissipation due t... Read More about Effect of cutting tools and working conditions on the machinability of TI-6AL-4V using vegetable oil-based cutting fluids.

Weld overlay cladding repair - An investigation of tensile strength variation in processed metallic substrate (2016)
Presentation / Conference Contribution
Chan, L., Shyha, I., Dreyer, D., Hamilton, J., & Hackney, P. (2016, May). Weld overlay cladding repair - An investigation of tensile strength variation in processed metallic substrate. Paper presented at International Conference on Advances in Mechanical

Weld Overlay Cladding (WOC) is a surfacing technique commonly applied on subsea Oil and Gas components to provide additional properties such as wear and corrosion resistance at a more superior level. This process involves a clad metal with certain de... Read More about Weld overlay cladding repair - An investigation of tensile strength variation in processed metallic substrate.

Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids (2015)
Presentation / Conference Contribution
Shyha, I., Gariani, S., & Bhatti, M. (2015, July). Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids. Presented at Manufacturing Engineering Society International Conference, MESI

Power consumed in metal cutting is typically converted into heat near the cutting tool edge. Cutting fluids are then provided to a cutting zone in order to improve the tribological characteristics of machining processes and to dissipate the generated... Read More about Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids.

Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam (2015)
Presentation / Conference Contribution
Oppon, C., Hackney, P., Shyha, I., & Birkett, M. (2015, July). Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam. Presented at Manufacturing Engineering Society International Conference (MESIC

The continuous growth of the usage of Polyurethane foams requires that designers and manufacturers investigate the appropriate factors that affect their production and full usage in order to exploit their full potential. This research reports the eff... Read More about Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam.

Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products (2015)
Presentation / Conference Contribution
Bade, L., Hackney, P., Shyha, I., & Birkett, M. (2015, July). Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products. Presented at The Manufacturing Engineering Society International Confer

The advancements in manufacturing technology over recent years have made Additive Manufacturing, a breakthrough technology in the designing and manufacturing field. This paper discusses the possible applications of Additive Manufacturing (AM) techniq... Read More about Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products.

Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity (2015)
Presentation / Conference Contribution
Kahwash, F., Shyha, I., & Maheri, A. (2015, July). Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity. Presented at Manufacturing Engineering Society International Conference, MES

The need for high quality machining of composite materials is rising due to the increased utilisation of these materials across several applications. This paper presents experimental findings of orthogonal cutting of unidirectional glass fibre reinfo... Read More about Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity.

Modelling of cutting fibrous composite materials: current practice (2015)
Presentation / Conference Contribution
Kahwash, F., Shyha, I., & Maheri, A. (2014, June). Modelling of cutting fibrous composite materials: current practice. Presented at 3rd CIRP Global Web Conference, Naples, Italy

Using fibre reinforced polymers (FRP) is increasing across many industries. Although FRP are laid-up in the near-net shape, several cutting operations are necessary to meet quality and dimensional requirements. Modelling of cutting is essential to un... Read More about Modelling of cutting fibrous composite materials: current practice.

Advances in Additive Manufacturing Processes (2014)
Presentation / Conference Contribution
Oppon, C., Hackney, P., Shyha, I., & Beeby, J. (2014). Advances in Additive Manufacturing Processes. In 3rd Applied Research Conference in Africa

Additive Manufacturing (AM) which is also referred as Three Dimensional Printing (3DP), Solid Freeform Fabrication (SFF) or Rapid Prototyping (RP) is a layer-by-layer technique of producing a three-dimensional (3D) objects directly from a digital mod... Read More about Advances in Additive Manufacturing Processes.

An Investigation into CO2 Laser Trimming of CFRP and GFRP Composites (2013)
Presentation / Conference Contribution
Shyha, I. (2013, June). An Investigation into CO2 Laser Trimming of CFRP and GFRP Composites. Presented at The Manufacturing Engineering Society International Conference, MESIC 2013, Zaragoza, Spain

The paper outlines results for an investigation of CO2 laser trimming of fibre reinforced plastic (FRP) composites. Process variables include cutting speed, laser beam power, gas pressure and workpiece material. These have been evaluated against key... Read More about An Investigation into CO2 Laser Trimming of CFRP and GFRP Composites.

Small hole drilling of carbon fibre composites using diamond coated drills (2009)
Presentation / Conference Contribution
Shyha, I. (2009). Small hole drilling of carbon fibre composites using diamond coated drills. In G. E. O'Donnell, & K. Kelly (Eds.), Efficient & Low Carbon Manufacturing: proceedings of the 26th International Manufacturing Conference (IMC26) (87-94)

Burr Formation in Drilling of Miniature Holes in Brass (2004)
Presentation / Conference Contribution
Shyha, I. (2004). Burr Formation in Drilling of Miniature Holes in Brass. In The 8th International Conference on Production Engineering, Design, and Control (PEDAC 2004)