Outputs (244)

Printed wideband MIMO antenna for mobile and portable communication devices (2015)
Presentation / Conference Contribution
See, C., Elkazmi, E., Samarah, K., Khambashi, M., Ali, A., Abd-Alhameed, R., McEwan, N., & Excell, P. (2015, July). Printed wideband MIMO antenna for mobile and portable communication devices. Presented at WiSATS: International Conference on Wireless and Satellite Systems, Bradford, UK

A printed crescent-shaped monopole MIMO antenna is presented for handheld wireless communication devices. The mutual coupling between the two antenna elements can be minimised by implementing a I-shaped common radiator. Both the simulated and measure... Read More about Printed wideband MIMO antenna for mobile and portable communication devices.

A novel hybrid intelligence approach for 2D packing through internet crowdsourcing (2015)
Presentation / Conference Contribution
Agrawal, A., Yadav, P., Upadhyay, C. K., Corney, J. R., Vasantha, G. A., Jagadeesan, A., & Lynn, A. (2015, July). A novel hybrid intelligence approach for 2D packing through internet crowdsourcing. Presented at 2015 IEEE Technological Innovation in ICT for Agriculture and Rural Development (TIAR), Chennai, India

Packing problems on its current state are being utilized for wide area of industrial applications. The aim of present research is to create and implement an intelligent system that tackles the problem of 2D packing of objects inside a 2D container, s... Read More about A novel hybrid intelligence approach for 2D packing through internet crowdsourcing.

Use of morphological features of carbonaceous materials for improved mechanical properties of epoxy nanocomposites (2015)
Journal Article
Atif, R., Wei, J., Shyha, I., & Inam, F. (2016). Use of morphological features of carbonaceous materials for improved mechanical properties of epoxy nanocomposites. RSC Advances, 6(2), 1351-1359. https://doi.org/10.1039/C5RA24039E

The influence of reinforcement morphology on damage tolerance and fracture toughness of epoxy based nanocomposites has been studied. Two different forms of carbonaceous reinforcements were used: multi-layered graphene (MLG) and nanostructured graphit... Read More about Use of morphological features of carbonaceous materials for improved mechanical properties of epoxy nanocomposites.

Mould release technologies with regard to concrete surface finish (2015)
Journal Article
Shyha, I., Richardson, A., Coventry, K., & Ponton, H. (2016). Mould release technologies with regard to concrete surface finish. Magazine of Concrete Research, 68(2), 87-98. https://doi.org/10.1680/macr.15.00067

Concrete durability is in part dependent upon the quality of the concrete cover zone. The type of mould release technology used has a direct effect on the surface finish of fair-faced concrete, and this in turn affects long-term durability. This work... Read More about Mould release technologies with regard to concrete surface finish.

Highly-Efficient Low-Cost Concentrators for Building Integrated Photovoltaic System (2015)
Presentation / Conference Contribution
Muhammad Sukki, F. (2015, December). Highly-Efficient Low-Cost Concentrators for Building Integrated Photovoltaic System. Presented at Research Presentation, James Watt South Building, University of Glasgow, Glasgow, United Kingdom

The degradation of mechanical properties in polymer nano-composites exposed to liquid media - a review (2015)
Journal Article
Saharudin, M., Atif, R., Shyha, I., & Inam, F. (2015). The degradation of mechanical properties in polymer nano-composites exposed to liquid media - a review. RSC Advances, 6(2), 1076-1089. https://doi.org/10.1039/C5RA22620A

The advancement of polymer nano-composites has been motivated by the need for materials with a specific combination of mechanical properties beyond those achieved from only one material. Integration of reinforcement into polymers at nanoscale can pro... Read More about The degradation of mechanical properties in polymer nano-composites exposed to liquid media - a review.

The teaching of thermodynamics today. (2015)
Book Chapter
Bartlett, R., & Kubie, J. (2015). The teaching of thermodynamics today. In M. W. Collins, R. C. Dougal, C. Koenig, & I. S. Ruddock (Eds.), Kelvin, Thermodynamics and the Natural World; WIT Transactions on State of the Art in Science and Engineering (261-271). WITPRESS LTD. https://doi.org/10.2495/978-1-84564-149-8/011

Although there are several robust theories of ‘thermodynamics’ operating very successfully over a range of different disciplines, for example, biology, chemistry, geoscience, quantum theory, astrophysics and numerous associated technologies, there ar... Read More about The teaching of thermodynamics today..

Sensing mechanism of RuO2–SnO2 thick film pH sensors studied by potentiometric method and electrochemical impedance spectroscopy (2015)
Journal Article
Manjakkal, L., Cvejin, K., Kulawik, J., Zaraska, K., Szwagierczak, D., & Stojanovic, G. (2015). Sensing mechanism of RuO2–SnO2 thick film pH sensors studied by potentiometric method and electrochemical impedance spectroscopy. Journal of Electroanalytical Chemistry, 759, 82-90. https://doi.org/10.1016/j.jelechem.2015.10.036

In this work, we developed thick film pH sensors based on the nanostructured RuO2–SnO2 system and analyzed their sensing mechanism using the potentiometric and electrochemical impedance spectroscopic (EIS) methods. The crystal structure and morpholog... Read More about Sensing mechanism of RuO2–SnO2 thick film pH sensors studied by potentiometric method and electrochemical impedance spectroscopy.

Micromechanical insight into the undrained instability of granular materials: deformation characteristics of geomaterials. (2015)
Presentation / Conference Contribution
Barreto, D., Prada-Sarmiento, L. F., & Ramos-Cañón, A. M. (2015, November). Micromechanical insight into the undrained instability of granular materials: deformation characteristics of geomaterials. Presented at 6th International Symposium on Deformation Characteristics of Geomaterials

There is no agreement between experimental researchers whether the point where a granular material responds with a large change of stresses, strains or excess pore water pressure given a prescribed small input of some of the same variables defines a... Read More about Micromechanical insight into the undrained instability of granular materials: deformation characteristics of geomaterials..

Ignition delay control of DME/air and EtOH/air homogeneous autoignition with the use of various additives (2015)
Journal Article
Tingas, E. A., Kyritsis, D. C., & Goussis, D. A. (2016). Ignition delay control of DME/air and EtOH/air homogeneous autoignition with the use of various additives. Fuel, 169, 15-24. https://doi.org/10.1016/j.fuel.2015.11.081

The effect of selected additives on the ignition delay of ethanol (EtOH)/air and dimethylether (DME)/air mixture is investigated. Computational Singular Perturbation (CSP) tools are utilized in an effort to determine algorithmically which species to... Read More about Ignition delay control of DME/air and EtOH/air homogeneous autoignition with the use of various additives.