Skip to main content

Research Repository

Advanced Search

Outputs (190)

Diagnosis of induction machines under non-stationary conditions by means of the spectral filter (2013)
Presentation / Conference Contribution
Vedreno-Santos, F., Riera-Guasp, M., & Pineda-Senchez, M. (2013, August). Diagnosis of induction machines under non-stationary conditions by means of the spectral filter. Presented at 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED)

This paper introduces a new way to extract the
fault components of a signal by means of a new proposed filter
based on the Sampling Theorem and the properties of Discrete
Fourier Transform. The proposed method is able to extract
fault components... Read More about Diagnosis of induction machines under non-stationary conditions by means of the spectral filter.

Solar energy measurements. (2013)
Book Chapter
Muneer, T., & Tham, Y. W. (2013). Solar energy measurements. In M. Kutz (Ed.), Handbook of Measurment in Science and Engineering (687-726). Wiley

Condition monitoring of the strength and stability of civil structures using thick film ceramic sensors (2013)
Journal Article
Jabir, S. A. A., & Gupta, N. K. (2013). Condition monitoring of the strength and stability of civil structures using thick film ceramic sensors. Measurement : journal of the International Measurement Confederation, 46, 2223-2231. https://doi.org/10.1016/j.measurement.2013.03.018

Structural Health Monitoring (SHM) is about the mechanical strength and stability of a structure. The methods used to reveal and quantify the structure quality could be different in nature. Strain change is, however, the common structural parameter i... Read More about Condition monitoring of the strength and stability of civil structures using thick film ceramic sensors.

Summary of Existing Models of the Ni-P Coating Electroless Deposition Process: MODELS OF THE NI-P COATING ELECTROLESS DEPOSITION PROCESS (2013)
Journal Article
Stankiewicz, A., Szczygieł, I., & Szczygieł, B. (2013). Summary of Existing Models of the Ni-P Coating Electroless Deposition Process: MODELS OF THE NI-P COATING ELECTROLESS DEPOSITION PROCESS. International Journal of Chemical Kinetics, 45(11), 755-762. https://doi.org/10.1002/kin.20810

Electroless nickel-phosphorous plating is a technique often employed in preparation of protective, decorative, and functional coatings. Several feasible mechanisms are discussed in the literature. The influence of process parameters on metal coating... Read More about Summary of Existing Models of the Ni-P Coating Electroless Deposition Process: MODELS OF THE NI-P COATING ELECTROLESS DEPOSITION PROCESS.

Design of a printed MIMO/diversity monopole antenna for future generation handheld devices: Design of a Printed MIMO/Diversity Monopole Antenna (2013)
Journal Article
See, C. H., Abd-Alhameed, R. . A., McEwan, N. . J., Jones, S. M. R., Asif, R., & Excell, P. . S. (2014). Design of a printed MIMO/diversity monopole antenna for future generation handheld devices: Design of a Printed MIMO/Diversity Monopole Antenna. International Journal of RF and Microwave Computer-Aided Engineering, 24(3), 348-359. https://doi.org/10.1002/mmce.20767

This article presents a printed crescent-shaped monopole MIMO diversity antenna for wireless communications. The port-to-port isolation is increased by introducing an I-shaped conductor symmetrically between the two antenna elements and shaping the... Read More about Design of a printed MIMO/diversity monopole antenna for future generation handheld devices: Design of a Printed MIMO/Diversity Monopole Antenna.

A manufacturing framework for capability-based product-service systems design (2013)
Journal Article
Gokula Vijaykumar, A. V., Komoto, H., Hussain, R., Roy, R., Tomiyama, T., Evans, S., Tiwari, A., & Williams, S. (2013). A manufacturing framework for capability-based product-service systems design. Journal of Remanufacturing, 3(1), 1-32. https://doi.org/10.1186/2210-4690-3-8

Manufacturers aim to design product-service systems (PSS) which integrate services with products to attain sustained competitive advantage from a life cycle perspective. PSS design should be customer-adjusted solutions which are aligned to integrated... Read More about A manufacturing framework for capability-based product-service systems design.

Morphological prediction of the polymorphic forms of para amino-benzoic acid based on internal crystallographic structure and crystallisation environment (2013)
Presentation / Conference Contribution
Rosbottom, I., Roberts, K. J., Hammond, R. B., & Soufian, M. (2013, August). Morphological prediction of the polymorphic forms of para amino-benzoic acid based on internal crystallographic structure and crystallisation environment. Presented at 17th International Conference on Crystal Growth and Epitaxy - ICCGE-17

Morphological prediction of the polymorphic forms of para amino-benzoic acid based on internal crystallographic structure and crystallisation environment.

Vibrational performance of timber floors constructed with metal web joists (2013)
Journal Article
Zhang, B., Kermani, A., & Fillingham, T. (2013). Vibrational performance of timber floors constructed with metal web joists. Engineering Structures, 56, 1321-1334. https://doi.org/10.1016/j.engstruct.2013.07.011

Metal web engineered timber joists are increasingly being used nowadays to replace traditional solid timber joists for constructing intermediate-span timber floors in low-rise houses and long-span floors in commercial buildings. Vibrational performan... Read More about Vibrational performance of timber floors constructed with metal web joists.

Self-healing coatings in anti-corrosion applications (2013)
Journal Article
Stankiewicz, A., Szczygieł, I., & Szczygieł, B. (2013). Self-healing coatings in anti-corrosion applications. Journal of Materials Science, 48(23), 8041-8051. https://doi.org/10.1007/s10853-013-7616-y

Nonmetallic (based on polymers or oxides) and metallic protective coatings are used to protect metal products against the harmful action of the corrosion environment. In recent years, self-healing coatings have been the subject of increasing interest... Read More about Self-healing coatings in anti-corrosion applications.