Skip to main content

Research Repository

Advanced Search

Outputs (106)

Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam (2015)
Presentation / Conference Contribution
Oppon, C., Hackney, P., Shyha, I., & Birkett, M. (2015, July). Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam. Presented at Manufacturing Engineering Society International Conference (MESIC 2015), Barcelona, Spain

The continuous growth of the usage of Polyurethane foams requires that designers and manufacturers investigate the appropriate factors that affect their production and full usage in order to exploit their full potential. This research reports the eff... Read More about Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam.

Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity (2015)
Presentation / Conference Contribution
Kahwash, F., Shyha, I., & Maheri, A. (2015, July). Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity. Presented at Manufacturing Engineering Society International Conference, MESIC 2015, Barcelona, Spain

The need for high quality machining of composite materials is rising due to the increased utilisation of these materials across several applications. This paper presents experimental findings of orthogonal cutting of unidirectional glass fibre reinfo... Read More about Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity.

Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products (2015)
Presentation / Conference Contribution
Bade, L., Hackney, P., Shyha, I., & Birkett, M. (2015, July). Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products. Presented at The Manufacturing Engineering Society International Conference, MESIC 2015, Barcelona, Spain

The advancements in manufacturing technology over recent years have made Additive Manufacturing, a breakthrough technology in the designing and manufacturing field. This paper discusses the possible applications of Additive Manufacturing (AM) techniq... Read More about Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products.

Reliability of manual assessments in determining the types of vegetation on railway tracks (2015)
Presentation / Conference Contribution
Nyberg, R. G., Yella, S., Gupta, N. K., & Dougherty, M. (2015, November). Reliability of manual assessments in determining the types of vegetation on railway tracks. Presented at Web Information Systems Engineering – WISE 2015, Miami, FL, USA

Current day vegetation assessments within railway maintenance are (to a large extent) carried out manually. This study has investigated the reliability of such manual assessments by taking three non-domain experts into account. Thirty-five track imag... Read More about Reliability of manual assessments in determining the types of vegetation on railway tracks.

Inter-rater reliability in determining the types of vegetation on railway trackbeds (2015)
Presentation / Conference Contribution
Nyberg, R. G., Yella, S., Gupta, N. K., & Dougherty, M. (2015, November). Inter-rater reliability in determining the types of vegetation on railway trackbeds. Presented at International Conference on Web Information Systems Engineering, Springer International Publishing

Vegetation growing on railway trackbeds and embankments can present several potential problems. Consequently, such vegetation is controlled through various maintenance procedures. In order to investigate the extent of maintenance needed, one of the f... Read More about Inter-rater reliability in determining the types of vegetation on railway trackbeds.

Printed wideband MIMO antenna for mobile and portable communication devices (2015)
Presentation / Conference Contribution
See, C., Elkazmi, E., Samarah, K., Khambashi, M., Ali, A., Abd-Alhameed, R., McEwan, N., & Excell, P. (2015, July). Printed wideband MIMO antenna for mobile and portable communication devices. Presented at WiSATS: International Conference on Wireless and Satellite Systems, Bradford, UK

A printed crescent-shaped monopole MIMO antenna is presented for handheld wireless communication devices. The mutual coupling between the two antenna elements can be minimised by implementing a I-shaped common radiator. Both the simulated and measure... Read More about Printed wideband MIMO antenna for mobile and portable communication devices.

A novel hybrid intelligence approach for 2D packing through internet crowdsourcing (2015)
Presentation / Conference Contribution
Agrawal, A., Yadav, P., Upadhyay, C. K., Corney, J. R., Vasantha, G. A., Jagadeesan, A., & Lynn, A. (2015, July). A novel hybrid intelligence approach for 2D packing through internet crowdsourcing. Presented at 2015 IEEE Technological Innovation in ICT for Agriculture and Rural Development (TIAR), Chennai, India

Packing problems on its current state are being utilized for wide area of industrial applications. The aim of present research is to create and implement an intelligent system that tackles the problem of 2D packing of objects inside a 2D container, s... Read More about A novel hybrid intelligence approach for 2D packing through internet crowdsourcing.

Micromechanical insight into the undrained instability of granular materials: deformation characteristics of geomaterials. (2015)
Presentation / Conference Contribution
Barreto, D., Prada-Sarmiento, L. F., & Ramos-Cañón, A. M. (2015, November). Micromechanical insight into the undrained instability of granular materials: deformation characteristics of geomaterials. Presented at 6th International Symposium on Deformation Characteristics of Geomaterials

There is no agreement between experimental researchers whether the point where a granular material responds with a large change of stresses, strains or excess pore water pressure given a prescribed small input of some of the same variables defines a... Read More about Micromechanical insight into the undrained instability of granular materials: deformation characteristics of geomaterials..

Increasing need for Offsite Construction and Manufactured Infrastructure in the UK Economy (2015)
Presentation / Conference Contribution
Smith, R. S., Wood, J. B., & Hairstans, R. (2015). Increasing need for Offsite Construction and Manufactured Infrastructure in the UK Economy. In CIAT Symposium Proceedings

Due to increasing demand for housing and other building infrastructure the methodology of offsite construction is becoming more attractive to developers, local authorities and government organisations. This paper outlines some of the key drivers such... Read More about Increasing need for Offsite Construction and Manufactured Infrastructure in the UK Economy.