Outputs (20)

Using photogrammetry method to evaluate the shear module of the laminated glass beam in torsion tests (2019)
Presentation / Conference Contribution
Uheida, K., Zhang, J., & Deng, Y. (2019, September). Using photogrammetry method to evaluate the shear module of the laminated glass beam in torsion tests. Paper presented at Civil-Comp 2019: The Sixteenth International Conference on Civil, Structural and Environmental Engineering Computing, Riva del Garda, Italy

The laminated structural glass beam is a modern, transparent and innovative structural element, widely used in supporting floor and roof plates, glass walls and many other applications. Despite many favourable characteristics inherent in the material... Read More about Using photogrammetry method to evaluate the shear module of the laminated glass beam in torsion tests.

Determination of shear modulus of wood joists from torsion tests and relationship with modulus of elasticity (2018)
Presentation / Conference Contribution
Khokhar, A., & Zhang, J. (2018, August). Determination of shear modulus of wood joists from torsion tests and relationship with modulus of elasticity. Presented at World Conference on Timber Engineering, Seoul, Republic of Korea

This paper presents the work that was undertaken to use torsion tests to evaluate the shear modulus of wood joists. The relationship of the shear modulus with modulus of elasticity, obtained from bending tests, was examined. Testing standard EN408 h... Read More about Determination of shear modulus of wood joists from torsion tests and relationship with modulus of elasticity.

Using topology optimization technique to determine the optimized layout of steel reinforcing bars in concrete structures (2016)
Presentation / Conference Contribution
Li, M., Zhang, H., & Wong, S. H. F. (2016, June). Using topology optimization technique to determine the optimized layout of steel reinforcing bars in concrete structures. Presented at 5th International Conference on Engineering Optimization

This study presents an optimization procedure based on the modified Bi-directional evolutionary structural optimization (BESO) approach to optimize both location and orientation of discrete reinforcing steel bars within concrete structures, while sat... Read More about Using topology optimization technique to determine the optimized layout of steel reinforcing bars in concrete structures.

A Low Cost Non-Contact and Non-Destructive Method for Evaluating the Variation of the Shear Modulus for Glued Laminated Timber Beams using a Photogrammetric Approach (2015)
Presentation / Conference Contribution
Mohamed, A., Zhang, H., Smith, I., & Xiao, Z. (2015, September). A Low Cost Non-Contact and Non-Destructive Method for Evaluating the Variation of the Shear Modulus for Glued Laminated Timber Beams using a Photogrammetric Approach. Presented at Proceedings of the Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing

This paper presents the experimental studies performed to investigate the feasibility of the proposed photogrammetric system for torsion tests. In this study, two binocular stereo systems were used to measure the surface rotation of timber glulam bea... Read More about A Low Cost Non-Contact and Non-Destructive Method for Evaluating the Variation of the Shear Modulus for Glued Laminated Timber Beams using a Photogrammetric Approach.

A form finding method for post formed timber grid shell structures. (2014)
Presentation / Conference Contribution
D'Amico, B., Kermani, A., & Zhang, H. (2014). A form finding method for post formed timber grid shell structures. . https://doi.org/10.13140/2.1.3949.8888

Timber grid shells provide efficient ways of covering large openings with relatively small amount of materials. With three-dimensional CAD software, it is now possible to model a free-form surface and discretize it in smaller straight elements, thus... Read More about A form finding method for post formed timber grid shell structures..

Shear failure modes of wood under torsional loading (2014)
Presentation / Conference Contribution
Khokhar, A., & Zhang, J. (2014, August). Shear failure modes of wood under torsional loading. Presented at World Conference on Timber Engineering, Quebec City, Canada

This paper presents details of the experimental investigation that was undertaken to examine the fracture mechanism of wood in shear. Torsion test method was employed to test structural size timber joists until they fractured. The test joists fract... Read More about Shear failure modes of wood under torsional loading.

The Use of Torsion Test Method to Evaluate the Shear Properties of Timber Joists (2012)
Presentation / Conference Contribution
Khokhar, A., & Zhang, J. (2012). The Use of Torsion Test Method to Evaluate the Shear Properties of Timber Joists. In P. Quenneville (Ed.), Proceedings of the World Conference on Timber Engineering (WCTE 2012)

This paper presents details of the experimental method and test results from a series of torsion tests undertaken to evaluate the shear modulus and shear strength of solid timber joist. The variation of shear modulus within and between test samples,... Read More about The Use of Torsion Test Method to Evaluate the Shear Properties of Timber Joists.

Digital image processing of weathered stone for determining the optimum cleaning level of stonework (2012)
Presentation / Conference Contribution
Humanyun, R., Zhang, H., & Zhang, B. (2012, July). Digital image processing of weathered stone for determining the optimum cleaning level of stonework. Presented at 14th International Conference and Exhibition on Structural Faults and Repair

In this study, the authors introduced a new image component sampling technique that can be used to evaluate level of cleaning of weathered masonry stone for historic buildings. The proposed technique is based on the Standard Pattern (SP). The images... Read More about Digital image processing of weathered stone for determining the optimum cleaning level of stonework.

Evaluation of shear constant of timber glulam composite with photogrammetric approach (2012)
Presentation / Conference Contribution
Zhang, H., Mohamed, A., & Smith, I. (2017). Evaluation of shear constant of timber glulam composite with photogrammetric approach. In Proceeding of the Fourteenth International Conference on Computing in Civil and Building Engineering

Shear constant of timber glulam materials plays an important role in structural modelling, such as lateral torsional buckling of the glulam beam, floor vibration and stabilities of long span glulam girders. In normal design approach, a fraction of th... Read More about Evaluation of shear constant of timber glulam composite with photogrammetric approach.

An Industrial Knowledge Collaborative CAD System for Scaffolding Structures (2011)
Presentation / Conference Contribution
O'Neill, S., Zhang, H., & Pawelak, M. (2011, September). An Industrial Knowledge Collaborative CAD System for Scaffolding Structures. Presented at Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing

Scaffolds are a form of temporary structure widely used throughout the construction industry for various purposes. Some common uses are to provide access, for storage of materials or as temporary support. The design of such structures is governed by... Read More about An Industrial Knowledge Collaborative CAD System for Scaffolding Structures.