Outputs (79)

A Review on Nanocomposites. Part 2: Micromachining (2020)
Journal Article
Le, B., Khaliq, J., Huo, D., Teng, X., & Shyha, I. (2020). A Review on Nanocomposites. Part 2: Micromachining. Journal of Manufacturing Science and Engineering, 142(10), Article 100802. https://doi.org/10.1115/1.4047138

Micromachining of nanocomposites is deemed to be a complicated process due to the anisotropic, heterogeneous structure and advanced mechanical properties of these materials associated with the size effects in micromachining. It leads to poorer machin... Read More about A Review on Nanocomposites. Part 2: Micromachining.

A Review on Nanocomposites. Part 1: Mechanical Properties (2020)
Journal Article
Le, B., Khaliq, J., Huo, D., Teng, X., & Shyha, I. (2020). A Review on Nanocomposites. Part 1: Mechanical Properties. Journal of Manufacturing Science and Engineering, 142(10), Article 100801. https://doi.org/10.1115/1.4047047

Micromachining of nanocomposites is deemed to be a complicated process due to the anisotropic, heterogeneous structure, and advanced mechanical properties of these materials associated with the size effects in micromachining. It leads to poorer machi... Read More about A Review on Nanocomposites. Part 1: Mechanical Properties.

Solution Blow Spinning of High-Performance Submicron Polyvinylidene Fluoride Fibres: Computational Fluid Mechanics Modelling and Experimental Results (2020)
Journal Article
Atif, R., Combrinck, M., Khaliq, J., Hassanin, A. H., Shehata, N., Elnabawy, E., & Shyha, I. (2020). Solution Blow Spinning of High-Performance Submicron Polyvinylidene Fluoride Fibres: Computational Fluid Mechanics Modelling and Experimental Results. Pol

Computational fluid dynamics (CFD) was used to investigate characteristics of high-speed air as it is expelled from a solution blow spinning (SBS) nozzle using a k-ε turbulence model. Air velocity, pressure, temperature, turbulent kinetic energy and... Read More about Solution Blow Spinning of High-Performance Submicron Polyvinylidene Fluoride Fibres: Computational Fluid Mechanics Modelling and Experimental Results.

Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites (2020)
Journal Article
Fu, G., Huo, D., Shyha, I., Pancholi, K., & Alzahrani, B. (2020). Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites. International Journal of Advanced Manufacturing Technology, 107, 3169-3183. https://doi.org/10.1

This paper investigates the effect of graphene nano platelet (GNP) content (%weight fraction) on the machinability of epoxy/GNP nanocomposites. The machinability of nanocomposites with varying loadings of GNP content was evaluated experimentally thro... Read More about Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites.

Improved non-contact 3D field and processing techniques to achieve macrotexture characterisation of pavements (2019)
Journal Article
Edmondson, V., Woodward, J., Lim, M., Kane, M., Martin, J., & Shyha, I. (2019). Improved non-contact 3D field and processing techniques to achieve macrotexture characterisation of pavements. Construction and Building Materials, 227, Article 116693. https:

Macrotexture is required on pavements to provide skid resistance for vehicle safety in wet conditions. Increasingly, correlations between macrotexture measurements captured using non-contact techniques and tyre-pavement contact friction are being inv... Read More about Improved non-contact 3D field and processing techniques to achieve macrotexture characterisation of pavements.

Experimental Investigation on Micro Milling of Polyester/Halloysite Nano-Clay Nanocomposites (2019)
Journal Article
Fu, G., Huo, D., Shyha, I., Pancholi, K., & Saharudin, M. S. (2019). Experimental Investigation on Micro Milling of Polyester/Halloysite Nano-Clay Nanocomposites. Nanomaterials, 9(7), Article 917. https://doi.org/10.3390/nano9070917

Efficient machining of the polyester nanocomposite components requires a better understanding of machinability characteristics of such material, which has become an urgent requirement for modern industrial production. In this research, the micro-mill... Read More about Experimental Investigation on Micro Milling of Polyester/Halloysite Nano-Clay Nanocomposites.

Effects of minimal quantity lubricants reinforced with nano-particles on the performance of carbide drills for drilling nickel-titanium alloys (2019)
Journal Article
Rosnan, R., Murad, M. N., Azmi, A. I., & Shyha, I. (2019). Effects of minimal quantity lubricants reinforced with nano-particles on the performance of carbide drills for drilling nickel-titanium alloys. Tribology International, 136, 58-66. https://doi.org

Drilling of NiTi alloys under two lubricant-coolant strategies; namely flood and minimal quantity nanolubricant; two types of carbides drills, and three cutting speeds was investigated. Progressive tool wear, tool-life, drilling thrust force, surface... Read More about Effects of minimal quantity lubricants reinforced with nano-particles on the performance of carbide drills for drilling nickel-titanium alloys.

Effect of hydrogen content on the double oxide film defects and properties of aluminium castings: A review (2018)
Journal Article
El-Sayed, M. A., Shyha, I., & Basuny, F. H. (2018). Effect of hydrogen content on the double oxide film defects and properties of aluminium castings: A review. Journal of Engineering Technology, 6, 225-244

Entrapped double oxide films are known to be the most detrimental defects in cast aluminium alloys. In addition, hydrogen dissolved in the aluminium melt was suggested to pass into the defects to expand them and cause hydrogen porosity. This paper pr... Read More about Effect of hydrogen content on the double oxide film defects and properties of aluminium castings: A review.

Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites (2018)
Journal Article
Teng, X., Chen, W., Huo, D., Shyha, I., & Lin, C. (2018). Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites. Composite Structures, 203, 636-647. https://doi.org/10.1016/j.compstruct.2018.07.0

Recently, metal matrix composites (MMCs) reinforced with nano-particles receive increasing attention from academia and industries. The cutting mechanism of nano MMCs is believed to be different when compared to composites reinforced with micro partic... Read More about Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites.

Dynamic simulation of machining composites using the explicit element-free Galerkin method (2018)
Journal Article
Kahwash, F., Shyha, I., & Maheri, A. (2018). Dynamic simulation of machining composites using the explicit element-free Galerkin method. Composite Structures, 198, 156-173. https://doi.org/10.1016/j.compstruct.2018.05.034

Machining operations are performed on composite parts to obtain the final geometry. However, machining composites is challenging due to their low machinability and high cost. Numerical modelling of machining presents a valuable tool for cost reductio... Read More about Dynamic simulation of machining composites using the explicit element-free Galerkin method.