Skip to main content

Research Repository

Advanced Search

Outputs (40)

Design and evaluation of optical fibre sensors in civil engineering applications for Structural Health Monitoring (2009)
Presentation / Conference Contribution
Grattan, K. T. V., Kerrouche, A., Sun, T., Grattan, S., Taylor, S. E., & Basheer, P. A. M. (2009, July). Design and evaluation of optical fibre sensors in civil engineering applications for Structural Health Monitoring. Presented at 14th OptoElectronics and Communications Conference (OECC), Hong Kong, China

A number of studies on the use of optical fibre sensor techniques for structural monitoring are discussed and results obtained, both in the laboratory and in the field, are reported.

Enhanced FBG sensor-based system performance assessment for monitoring strain along a prestressed CFRP rod in structural monitoring (2009)
Journal Article
Kerrouche, A., Boyle, W., Sun, T., Grattan, K., Schmidt, J., & Täljsten, B. (2009). Enhanced FBG sensor-based system performance assessment for monitoring strain along a prestressed CFRP rod in structural monitoring. Sensors and Actuators A: Physical, 151(2), 127-132. https://doi.org/10.1016/j.sna.2009.02.030

Fiber Bragg grating (FBG) sensor-based systems have been widely used for many engineering applications including most recently a number of applications in structural health monitoring. It is well known that strain and temperature both affect the FBG... Read More about Enhanced FBG sensor-based system performance assessment for monitoring strain along a prestressed CFRP rod in structural monitoring.

Design and in-the-field performance evaluation of compact FBG sensor system for structural health monitoring applications (2009)
Journal Article
Kerrouche, A., Boyle, W., Sun, T., & Grattan, K. (2009). Design and in-the-field performance evaluation of compact FBG sensor system for structural health monitoring applications. Sensors and Actuators A: Physical, 151(2), 107-112. https://doi.org/10.1016/j.sna.2009.01.021

Over the last few years optical fibre sensor systems have been developed and their use reported for the monitoring of large civil engineering structures. In this way they have shown themselves to be well suited to the measurement of strain and temper... Read More about Design and in-the-field performance evaluation of compact FBG sensor system for structural health monitoring applications.

Strain Measurement on a Rail Bridge Loaded to Failure Using a Fiber Bragg Grating-Based Distributed Sensor System (2008)
Journal Article
Kerrouche, A., Leighton, J., Boyle, W. J. O., Gebremichael, Y. M., Sun, T., Grattan, K. T. V., & Taljsten, B. (2008). Strain Measurement on a Rail Bridge Loaded to Failure Using a Fiber Bragg Grating-Based Distributed Sensor System. IEEE Sensors Journal, 8(12), 2059-2065. https://doi.org/10.1109/jsen.2008.2006704

The paper reports results obtained from an unusual situation in structural monitoring - a "test-to-destruction," measuring strain using a series of fiber Bragg gratings (FBGs) sensors on a decommissioned concrete Railway Bridge in Ornskoldsvik, Swede... Read More about Strain Measurement on a Rail Bridge Loaded to Failure Using a Fiber Bragg Grating-Based Distributed Sensor System.

Field tests of fibre Bragg grating sensors incorporated into CFRP for railway bridge strengthening condition monitoring (2008)
Journal Article
Kerrouche, A., Boyle, W., Gebremichael, Y., Sun, T., Grattan, K., Täljsten, B., & Bennitz, A. (2008). Field tests of fibre Bragg grating sensors incorporated into CFRP for railway bridge strengthening condition monitoring. Sensors and Actuators A: Physical, 148(1), 68-74. https://doi.org/10.1016/j.sna.2008.07.014

The EU is in the process of upgrading the national railway networks to meet the demands from high-speed passenger trains and heavy Freight traffic. This upgrade necessitates a review of the development and implementation of novel technologies to repa... Read More about Field tests of fibre Bragg grating sensors incorporated into CFRP for railway bridge strengthening condition monitoring.

Railway Bridge loaded to failure test in Örnsköldsvik, Sweden - strain measurements using fibre Bragg grating system incorporated in Carbon reinforced polymer (2008)
Presentation / Conference Contribution
Kerrouche, A., Leighton, J., & Boyle, W. (2008, July). Railway Bridge loaded to failure test in Örnsköldsvik, Sweden - strain measurements using fibre Bragg grating system incorporated in Carbon reinforced polymer. Presented at Fourth International IABMAS Conference - IABMAS '08, Seoul, Korea

No abstract available.

Field Test - Strengthening and Monitoring of the Frövi Bridge (2008)
Presentation / Conference Contribution
Kerrouche, A., Boyle, W., Gebremichael, Y., Alwis, L., Grattan, K., Taljsten, B., & Bernnitz, A. (2008, July). Field Test - Strengthening and Monitoring of the Frövi Bridge. Presented at Fourth International IABMAS Conference - IABMAS '08, Seoul, Korea

No abstract available.

Strengthening of the Örnsköldsviks Bridge with Near Surface Mounted CFRP Rods (2007)
Report
Kerrouche, A. (2007). Strengthening of the Örnsköldsviks Bridge with Near Surface Mounted CFRP Rods. European Commission

During June/July 2006 a full scale loading of a railway bridge up to failure was carried out in Sweden. The opportunity to make this loading came up due to partly upgrade the old line and partly building of a new railway line, the Botnia Line, betwee... Read More about Strengthening of the Örnsköldsviks Bridge with Near Surface Mounted CFRP Rods.

Guidelines and current developments for the use of Fibre Bragg Grating Sensors in the rail industry (2007)
Book Chapter
Boyle, W., Kerrouche, A., & Leighton, J. (2007). Guidelines and current developments for the use of Fibre Bragg Grating Sensors in the rail industry. In J. Bień, L. Elfgren, & J. Olofsson (Eds.), Sustainable Bridges: Assessment for Future Traffic Demands and Longer Lives (169-180). Dolnośląskie Wydawnictwo Edukacyjne

This paper provides guidelines for the specification, design, installation and operation of Fiber optic Bragg Grating Sensors (FBGS) systems for measurement and analysis of strain in structural integrity and load monitoring in the Rail Industry. The... Read More about Guidelines and current developments for the use of Fibre Bragg Grating Sensors in the rail industry.