Skip to main content

Research Repository

Advanced Search

Outputs (161)

Cycle & Mountain Biking Industries Innovation Summit (2018)
Presentation / Conference Contribution
Taylor, M. (2018, November). Cycle & Mountain Biking Industries Innovation Summit. Presented at Scottish Mountain Biking Conference Innovation Summit, Aviemore, Scotland,

The partners and companies of Cycle Industries
Europe (CIE), Mountain Bike Centre of Scotland
(MTBCoS) and Developing Mountain Biking in Scotland
(DMBinS) invitation to attend the Cycle & Mountain Biking
Industries’ Innovation Summit to be held i... Read More about Cycle & Mountain Biking Industries Innovation Summit.

Machine Learning for Sustainable Structures: A Call for Data (2018)
Journal Article
D'Amico, B., Myers, R., Sykes, J., Voss, E., Cousins-Jenvey, B., Fawcett, W., Richardson, S., Kermani, A., & Pomponi, F. (2019). Machine Learning for Sustainable Structures: A Call for Data. Structures, 19, 1-4. https://doi.org/10.1016/j.istruc.2018.11.013

Buildings are the world's largest contributors to energy demand, greenhouse gases (GHG) emissions, resource consumption and waste generation. An unmissable opportunity exists to tackle climate change, global warming, and resource scarcity by rethinki... Read More about Machine Learning for Sustainable Structures: A Call for Data.

Assessing the capacity of biochar to stabilize copper and lead in contaminated sediments using chemical and extraction methods (2018)
Journal Article
Wang, M., Ren, L., Wang, D., Cai, Z., Xia, X., & Ding, A. (2019). Assessing the capacity of biochar to stabilize copper and lead in contaminated sediments using chemical and extraction methods. Journal of Environmental Sciences, 79, 91-99. https://doi.org/10.1016/j.jes.2018.11.007

Because of its high adsorption capacity, biochar has been used to stabilize heavy metals when remediating contaminated soils; to date, however, it has seldom been used to remediate contaminated sediment. In this study, a biochar was used as a stabili... Read More about Assessing the capacity of biochar to stabilize copper and lead in contaminated sediments using chemical and extraction methods.

Scottish cycling infrastructure and public health: a study of cyclist hand-arm vibration exposure (2018)
Presentation / Conference Contribution
Taylor, M. (2018, November). Scottish cycling infrastructure and public health: a study of cyclist hand-arm vibration exposure. Paper presented at 1st Annual Cycling Research Board Meeting, Amsterdam, Netherlands

The management of pavement surfaces for walking and cycling is currently a labour intensive task and relies upon user reporting defects and direct visual inspection. Local authorities are being pressed to cut budgets and reduce annual expenditure.... Read More about Scottish cycling infrastructure and public health: a study of cyclist hand-arm vibration exposure.

Waste-composition-dependent HBM model parameters based on degradation experiments (2018)
Journal Article
Datta, S., Zekkos, D., Fei, X., & McDougall, J. (2021). Waste-composition-dependent HBM model parameters based on degradation experiments. Environmental Geotechnics, 8(2), 124-133. https://doi.org/10.1680/jenge.18.00014

Municipal solid waste (MSW) is biodegradable in landfills under anaerobic conditions. The evolution of the hydro-biochemical-mechanical (HBM) processes during degradation is investigated first through experiments and subsequently via modelling. Thr... Read More about Waste-composition-dependent HBM model parameters based on degradation experiments.

Naturalistic measurement of driver eye height and object height using photogrammetry (2018)
Journal Article
Llewellyn, R., Sarkar, P., & Taylor, M. D. (2021). Naturalistic measurement of driver eye height and object height using photogrammetry. Proceedings of the ICE - Transport, 174(7), 430-440. https://doi.org/10.1680/jtran.18.00124

Driver eye height and object height are key factors in the derivation of basic parameters for safe and economically efficient highway design. This study critically reviews previous approaches to the measurement of these values and investigates the c... Read More about Naturalistic measurement of driver eye height and object height using photogrammetry.

The influence of particle-size distribution on critical state behavior of spherical and non-spherical particle assemblies (2018)
Journal Article
Jiang, M. D., Yang, Z. X., Barreto, D., & Xie, Y. H. (2018). The influence of particle-size distribution on critical state behavior of spherical and non-spherical particle assemblies. Granular Matter, 20(80), https://doi.org/10.1007/s10035-018-0850-x

This paper presents an investigation into the effects of particle-size distribution on the critical state behavior of granular materials using Discrete Element Method (DEM) simulations on both spherical and non-spherical particle assemblies. A series... Read More about The influence of particle-size distribution on critical state behavior of spherical and non-spherical particle assemblies.

Strategies for One Dimensional (1D) Compression Testing of Large-Particle-Sized Tire Derived Aggregate (2018)
Journal Article
Adesokan, D., Fleming, I., Hammerlindl, A., & McDougall, J. (2019). Strategies for One Dimensional (1D) Compression Testing of Large-Particle-Sized Tire Derived Aggregate. Geotechnical Testing Journal, 42(5), 1336-1358. https://doi.org/10.1520/gtj20170091

Laboratory testing of a mass of large particle sized Tire Derived Aggregate (TDA) to assess performance related properties such as void ratio, compressive creep and hydraulic conductivity under large loads poses a number of experimental challenges. L... Read More about Strategies for One Dimensional (1D) Compression Testing of Large-Particle-Sized Tire Derived Aggregate.

Investigating the fracture behavior of Portland limestone: an experimental study (2018)
Presentation / Conference Contribution
Marinelli, A., & Stewart, M. (2018, May). Investigating the fracture behavior of Portland limestone: an experimental study. Presented at 1st Internationl Conference of the Greek Society of Experimental Mechanics of Materials, Athens, Greece

An experimental investigation of the mechanical and fracture characteristics of the ‘Grove Whitbed’ Portland limestone is undertaken with the aim to enhance understanding of the structural behavior of this natural building stone, commonly used in bot... Read More about Investigating the fracture behavior of Portland limestone: an experimental study.

Scottish cycling pavement assessment using hand-arm vibration exposure (2018)
Journal Article
Taylor, M. D., Edgar, A., & Raine, M. (2019). Scottish cycling pavement assessment using hand-arm vibration exposure. Infrastructure Asset Management, 6(2), 86-101. https://doi.org/10.1680/jinam.17.00014

A defective pavement surface discourages cyclists from selecting certain routes, and vibration exposure is a noticeable
consequence of reduced path surface quality. Current asset management practice includes walkover surveys and
cyclists reporting... Read More about Scottish cycling pavement assessment using hand-arm vibration exposure.

Is it efffective to prevent HAVS by using tool vibration declaration values? (2018)
Presentation / Conference Contribution
Maeda, S., Taylor, M., Anderson, L., & McLaughlin, J. (2018, August). Is it efffective to prevent HAVS by using tool vibration declaration values?. Presented at The 26th Japan Conference of Human Response to Vibration (JCHRV2018), Kindai University, Osaka, Japan

This study reports the results of an investigation into A(8) based on tool vibration declaration values evaluation effects of hand-transmitted vibration on temporary threshold shifts of vibratory sensation on the finger. The hand-transmitted vibratio... Read More about Is it efffective to prevent HAVS by using tool vibration declaration values?.

Assessing the relationship between the human response to vibration in the vibrotactile threshold shift with HAV exposure determined on the subject (2018)
Presentation / Conference Contribution
Anderson, L., Taylor, M., Maeda, S., & McLaughlin, J. (2018, August). Assessing the relationship between the human response to vibration in the vibrotactile threshold shift with HAV exposure determined on the subject. Presented at The 26 th Japan Conference on Human Response to Vibration (JCHRV2018), Osaka, Japan

Existing risk assessment methodologies are based on fixed tool vibration magnitude emission data (such as tool declaration data or a point in time (typically annually) tool measurement to ISO5349) and tool usage time. The research evaluates the rela... Read More about Assessing the relationship between the human response to vibration in the vibrotactile threshold shift with HAV exposure determined on the subject.

Briefing: BS 8001 and the built environment: a review and critique (2018)
Journal Article
Pomponi, F., & Moncaster, A. (2018). Briefing: BS 8001 and the built environment: a review and critique. Proceedings of the ICE - Engineering Sustainability, 1-4. https://doi.org/10.1680/jensu.17.00067

The BSI has recently published the world’s first standard on the Circular Economy. The standard is intentionally broad and inclusive to suit all types of organisations and products. However, when it comes to complex products such as buildings – with... Read More about Briefing: BS 8001 and the built environment: a review and critique.

Why method matters: temporal, spatial and physical variations in LCA and their impact on choice of structural system (2018)
Journal Article
Moncaster, A., Pomponi, F., Symons, K., & Guthrie, P. (2018). Why method matters: temporal, spatial and physical variations in LCA and their impact on choice of structural system. Energy and Buildings, https://doi.org/10.1016/j.enbuild.2018.05.039

Life Cycle Assessment (LCA) is increasingly used as an early-stage design-decision tool to support choices of structural system. However LCA modellers must first make numerous methodological decisions, and the resultant wide variations in approach ar... Read More about Why method matters: temporal, spatial and physical variations in LCA and their impact on choice of structural system.

Measurement of Cycling Risk and Quantitative Policy (2018)
Presentation / Conference Contribution
Meade, S., Stewart, K., & Maher, M. (2018, May). Measurement of Cycling Risk and Quantitative Policy. Paper presented at Scottish Transport Applications and Research (STAR) Conference 2018, Glasgow

The SiN (Safety-in-numbers) effect has become prevalent within cycling research in recent years and describes the phenomenon whereby cycling accident risk may fall when the volume of cyclists increases. Such an effect is clearly attractive to policy... Read More about Measurement of Cycling Risk and Quantitative Policy.

Estimating degradation-related settlement in two landfill-reclaimed soils by sand-salt analogues (2018)
Journal Article
McDougall, J., Fleming, I., Thiel, R., Dewaele, P., Parker, D., & Kelly, D. (2018). Estimating degradation-related settlement in two landfill-reclaimed soils by sand-salt analogues. Waste Management, https://doi.org/10.1016/j.wasman.2018.04.013

Landfill reclaimed soil here refers to largely degraded materials excavated from old landfill sites, which after processing can be reinstated as more competent fill, thereby restoring the former landfill space. The success of the process depends on... Read More about Estimating degradation-related settlement in two landfill-reclaimed soils by sand-salt analogues.

New method for rock qualification (2018)
Presentation / Conference Contribution
János, L., Emőke, I., Phong. Q, T., Miklós, G., László, K., István, T., Barreto Gonzalez, D., Casini, F., & Guida, G. (2018, April). New method for rock qualification. Presented at Mérnökgeológia - Kőzetmechanika 2018 (Engineering Geology and Rock Mechanics Congress 2018)

A new method was elaborated to characterize the breakage properties of rocks. A crushing test was suggested and parallel tests were performed on sand-pairs with different parent rocks, using identical initial gradings. The data were analyse... Read More about New method for rock qualification.

Carbon mitigation in the built environment: an input-output analysis of building materials and components in the UK (2018)
Presentation / Conference Contribution
Pomponi, F., & D'Amico, B. (2018, April). Carbon mitigation in the built environment: an input-output analysis of building materials and components in the UK. Presented at 25th CIRP Life Cycle Engineering (LCE) Conference, Copenhagen, Denmark

The circular economy has set out a new paradigm for a much
needed shift from eco-efficiency to eco-effectiveness. Buildings are top contributor globally for resource use and waste creation. Therefore, any improvement in an effective use of building... Read More about Carbon mitigation in the built environment: an input-output analysis of building materials and components in the UK.