Beyond time: Enhancing corrosion resistance of geopolymer concrete and BFRP bars in seawater

Chen, Zheng; Yu, Jiamin; Nong, Yumei; Yang, Yongmin; Zhang, Hexin; Tang, Yunchao

Abstract

To improve the durability of Basalt fiber reinforced polymer (BFRP) bars reinforced geopolymer concrete (GPC), it is important to study the time-dependent variation of the corrosion resistance ability of GPC and BFRP in a seawater environment. This paper presents an experimental investigation to study the time-dependent mechanical properties and durability of BFRP bars and geopolymer materials synthesized by granulated blast furnace slag (GGBFS), fly ash, and silica fume. The resulting GPC and Portland cement (PC) concrete were exposed to artificial seawater. The mechanical properties of GPC were evaluated by analyzing and comparing the volume expansion and strength loss rates of GPC and PC concrete in an artificial seawater environment. The corrosion resistance of geopolymer (GP) mortar and PC mortar was evaluated by studying the migration ability and pore structure in corrosive ions attack (Cl−, SO42−, Mg2+) in artificial seawater. Moreover, the time-dependent tensile strength of BFRP was comparatively investigated by immersing in different solutions (tap water, artificial seawater, and alkaline simulated seawater). In addition, the dual interface transition zones (ITZs) characteristics of BFRP reinforced GPC under artificial seawater were also investigated by SEM and BSE tests. The results showed that the volume expansion rate and strength loss rate of GPC decreased by 77.6% and 8.7%, respectively, after 360 days of seawater corrosion compared with PC concrete. This enabled the development of a time-dependent strength model of GPC in marine environments. The coefficient of ions diffusion in GP mortar is much lower than that of PC mortar, and GP mortar shows excellent resistance to ion migration. In addition, the effect of seawater corrosion on the tensile strength of BFRP bars increases with the increase of bars' diameter, and the ultimate strengths of BFRP bars with diameters of 6 mm and 8 mm were 695 MPa and 663 MPa, respectively. The tensile strength degradation model of BFRP bars in geopolymer concrete under seawater corrosion was established. After 360 days of seawater immersion, the average porosity of the ITZ between geopolymer and aggregates, and the average porosity of the ITZ between geopolymer and BFRP bars increased insignificantly compared to that of PC concrete. This research can provide a theoretical basis for the service life prediction of BFRP reinforced geopolymer concrete within marine environments.

Citation

Chen, Z., Yu, J., Nong, Y., Yang, Y., Zhang, H., & Tang, Y. (2023). Beyond time: Enhancing corrosion resistance of geopolymer concrete and BFRP bars in seawater. Composite Structures, 322, Article 117439. https://doi.org/10.1016/j.compstruct.2023.117439

• Journal Article Type: Article
• Acceptance Date: Aug 9, 2023
• Online Publication Date: Aug 10, 2023
• Publication Date: 2023-10
• Deposit Date: Aug 18, 2023
• Publicly Available Date: Aug 11, 2024
• Print ISSN: 0263-8223
• Publisher: Elsevier
• Peer Reviewed: Peer Reviewed
• Volume: 322
• Article Number: 117439
• DOI: https://doi.org/10.1016/j.compstruct.2023.117439
• Keywords: Geopolymer concrete, Basalt fiber reinforced polymer (BFRP) bars, Seawater, Time-dependence, Interface characteristic