Outputs (94)

Stretchable electrospun PVDF/TPU nanofibers membranes: Acoustic signals detectors (2024)
Journal Article
Nair, R., El-kadery, A., Khalil, A. M., El-kaliuoby, M. I., Kandas, I., Jain, A., Omran, N., Gamal, M., Noman, S., Magdy, G., Maree, K., El-Khatib, A. M., Hassanin, A. H., Shyha, I., Jaradat, S., Al-Dubai, A., Trabelsi, M., Al Othman, B., & Shehata, N. (online). Stretchable electrospun PVDF/TPU nanofibers membranes: Acoustic signals detectors. MRS Energy and Sustainability, https://doi.org/10.1557/s43581-024-00111-4

Devices that harvest energy are crucial for reducing reliance on energy transmission and distribution systems. This helps minimize energy loss and mitigate environmental impacts. In this study, we focused on manufacturing nanocomposites using various... Read More about Stretchable electrospun PVDF/TPU nanofibers membranes: Acoustic signals detectors.

The effect of electro blow spinning parameters on the characteristics of polylactic acid nanofibers: Towards green development of high-performance biodegradable membrane (2024)
Journal Article
Elnabawy, E., Sun, D., Shearer, N., & Shyha, I. (2024). The effect of electro blow spinning parameters on the characteristics of polylactic acid nanofibers: Towards green development of high-performance biodegradable membrane. Polymer, 311, Article 127553. https://doi.org/10.1016/j.polymer.2024.127553

Electro-blow spinning represents a novel and emerging hybridised technology for producing high-quality, large-scale nanofibers. The applied pressure, accompanied by an electric field, functions as a drafting force to generate ultrafine, homogeneous n... Read More about The effect of electro blow spinning parameters on the characteristics of polylactic acid nanofibers: Towards green development of high-performance biodegradable membrane.

Optimizing DMF Utilization for Improved MXene Dispersions in Epoxy Nanocomposites (2024)
Journal Article
Janjua, A. A., Younas, M., Ilyas, R. A., Shyha, I., Faisal, N. H., Inam, F., & Saharudin, M. S. (2024). Optimizing DMF Utilization for Improved MXene Dispersions in Epoxy Nanocomposites. Journal of Composites Science, 8(9), Article 340. https://doi.org/10.3390/jcs8090340

Dimethylformamide (DMF), a polar solvent, is commonly used for preparing graphene/epoxy nanocomposites. While previous research has commonly predominantly highlighted the improvement in physio-mechanical properties of these nanocomposites, the effect... Read More about Optimizing DMF Utilization for Improved MXene Dispersions in Epoxy Nanocomposites.

Revolutionising orthopaedic implants—a comprehensive review on metal 3D printing with materials, design strategies, manufacturing technologies, and post-process machining advancements (2024)
Journal Article
Shaikh, M., Kahwash, F., Lu, Z., Alkhreisat, M., Mohammad, A., & Shyha, I. (2024). Revolutionising orthopaedic implants—a comprehensive review on metal 3D printing with materials, design strategies, manufacturing technologies, and post-process machining advancements. International Journal of Advanced Manufacturing Technology, 134, 1043-1076. https://doi.org/10.1007/s00170-024-14218-y

This paper conceptualises an understanding of advanced manufacturing methods to develop 3D-printed metallic orthopaedic implants, including a brief discussion on post-process machining. The significance of Metallic Additive Manufacturing (MAM) and it... Read More about Revolutionising orthopaedic implants—a comprehensive review on metal 3D printing with materials, design strategies, manufacturing technologies, and post-process machining advancements.

Optimizing DMF Utilization for Improved MXene Dispersions in Epoxy Nanocomposites (2024)
Preprint / Working Paper
Ali Janjua, A., Younas, M., Ahmad Ilyas, R., Shyha, I., Haque Faisal, N., Inam, F., & Shahneel Saharudin, M. Optimizing DMF Utilization for Improved MXene Dispersions in Epoxy Nanocomposites

Dimethylformamide (DMF), a polar solvent, is commonly used for preparing graphene/epoxy nanocomposites. While commonly previous research has predominantly highlighted the improvement in physio-mechanical properties of these nanocomposites, the effect... Read More about Optimizing DMF Utilization for Improved MXene Dispersions in Epoxy Nanocomposites.

Lead-Free NaNbO 3 -Based Ceramics for Electrostatic Energy Storage Capacitors (2024)
Journal Article
Soheli, S. N., Lu, Z., Sun, D., & Shyha, I. (2024). Lead-Free NaNbO 3 -Based Ceramics for Electrostatic Energy Storage Capacitors. Ceramics, 7(2), 712-734. https://doi.org/10.3390/ceramics7020047

The burgeoning significance of antiferroelectric (AFE) materials, particularly as viable candidates for electrostatic energy storage capacitors in power electronics, has sparked substantial interest. Among these, lead-free sodium niobate (NaNbO3) AFE... Read More about Lead-Free NaNbO 3 -Based Ceramics for Electrostatic Energy Storage Capacitors.

Parametric Study on PVDF Electrospun Nanofibers: Optical Characteristics, Piezoelectric Analysis, and Correlated Applications (2024)
Journal Article
Nair, R., Mahdi, J., Amjad, O., Maree, K., Jain, A., Al-Dubai, A., Jaradat, S., Shyha, I., Trabelsi, M., Alothamn, B., & Shehata, N. (2024). Parametric Study on PVDF Electrospun Nanofibers: Optical Characteristics, Piezoelectric Analysis, and Correlated Applications. Journal of Electronic Materials, 53, 4155–4172. https://doi.org/10.1007/s11664-024-11097-7

In this study, both the optical and piezoelectric properties of polyvinylidene fluoride (PVDF) electrospun nanofibers were investigated at different needle-to-collector distances of the electrospinning process at constant applied high voltage. For pi... Read More about Parametric Study on PVDF Electrospun Nanofibers: Optical Characteristics, Piezoelectric Analysis, and Correlated Applications.

Exploring advances in nanofiber-based face masks: a comprehensive review of mechanical, electrostatic, and antimicrobial functionality filtration for the removal of airborne particulate matter and pathogens (2024)
Journal Article
Le, B., Omran, N., Elnabawy, E., Hassanin, A. H., Mahmoud, K., Shehata, N., & Shyha, I. (2024). Exploring advances in nanofiber-based face masks: a comprehensive review of mechanical, electrostatic, and antimicrobial functionality filtration for the removal of airborne particulate matter and pathogens. Emergent Materials, 7(3), 765-800. https://doi.org/10.1007/s42247-023-00622-9

The filtration of airborne particulate matter (PM) and aerosols utilizing nonwoven fibrous materials has received significant research concern due to the continuing global pandemics, especially the outbreak of coronavirus disease (COVID-19), and part... Read More about Exploring advances in nanofiber-based face masks: a comprehensive review of mechanical, electrostatic, and antimicrobial functionality filtration for the removal of airborne particulate matter and pathogens.

Experimental investigation on thermomechanical properties and micro-machinability of carbon nanofibre reinforced epoxy nanocomposites (2023)
Journal Article
Le, B., Fu, G., Khaliq, J., Huo, D., & Shyha, I. (2023). Experimental investigation on thermomechanical properties and micro-machinability of carbon nanofibre reinforced epoxy nanocomposites. Journal of Manufacturing Processes, 99, 781-793. https://doi.org/10.1016/j.jmapro.2023.05.080

A comprehensive experimental investigation on thermomechanical properties and micro-machinability of carbon nanofibre reinforced epoxy nanocomposites (EP/CNF) is presented in this study. The machinability indicators including cutting force and surfac... Read More about Experimental investigation on thermomechanical properties and micro-machinability of carbon nanofibre reinforced epoxy nanocomposites.

Flexible piezoelectric PVDF/TPU nanofibrous membranes produced by solution blow spinning (2023)
Journal Article
Le, B., Omran, N., Hassanin, A. H., Kandas, I., Gamal, M., Shehata, N., & Shyha, I. (2023). Flexible piezoelectric PVDF/TPU nanofibrous membranes produced by solution blow spinning. Journal of Materials Research and Technology, 24, 5032-5041. https://doi.org/10.1016/j.jmrt.2023.04.051

Poly (vinylidene fluoride) (PVDF) nanofibers have been applied in producing piezoelectric membranes for energy harvesting in wearable devices under strenuous service conditions due to its outstanding properties such as piezoelectricity, flexibility,... Read More about Flexible piezoelectric PVDF/TPU nanofibrous membranes produced by solution blow spinning.