Outputs (42)

Effective and Fast-Screening Route to Evaluate Dynamic Elastomer-Filler Network Reversibility for Sustainable Rubber Composite Design (2023)
Journal Article
Xia, T., Wemyss, A. M., Salehiyan, R., Heeley, E. L., Hu, X., Tang, F., …Wan, C. (2023). Effective and Fast-Screening Route to Evaluate Dynamic Elastomer-Filler Network Reversibility for Sustainable Rubber Composite Design. ACS sustainable chemistry & engineering, 11, 17857-17869. https://doi.org/10.1021/acssuschemeng.3c06752

The introduction of self-healing and reprocessability into conventional vulcanized rubbers has been recognized as a promising strategy to promote elastomer circularity. However, the reversibility and recovery of cross-linking polymer networks have of... Read More about Effective and Fast-Screening Route to Evaluate Dynamic Elastomer-Filler Network Reversibility for Sustainable Rubber Composite Design.

Clay Dispersion Assessment via FT-Rheology for Polypropylene/Clay Nanocomposites Fabricated by an Electric Field (2023)
Journal Article
Kim, M., Kim, M. C., Myung, J. S., Salehiyan, R., Choi, W. J., & Hyun, K. (2023). Clay Dispersion Assessment via FT-Rheology for Polypropylene/Clay Nanocomposites Fabricated by an Electric Field. ACS Applied Polymer Materials, 5(9), 6695-7674. https://doi.org/10.1021/acsapm.3c01104

Nonlinear viscoelastic parameters obtained from a large-amplitude oscillatory shear (LAOS) test have widely received attention in polymer nanocomposite (PNC) characterization. Previously, we reported that nonlinear parameters, Q0 and NLR (nonlinear–l... Read More about Clay Dispersion Assessment via FT-Rheology for Polypropylene/Clay Nanocomposites Fabricated by an Electric Field.

Effect of Mixing Strategy on the Structure-Properties of the PLA/PBAT Blends Incorporated with CNC (2022)
Journal Article
Sarul, D. S., Arslan, D., Vatansever, E., Kahraman, Y., Durmus, A., Salehiyan, R., & Nofar, M. (2022). Effect of Mixing Strategy on the Structure-Properties of the PLA/PBAT Blends Incorporated with CNC. Journal of Renewable Materials, 10(1), 149-164. https://doi.org/10.32604/jrm.2022.017003

Polylactide (PLA)/poly (butylene adipate-co-terephthalate) (PBAT) blend nanocomposites including 3 wt% of cellulose nanocrystals (CNCs) were prepared by melt compounding method in a twin-screw extruder and an internal mixer. Blend nanocomposites were... Read More about Effect of Mixing Strategy on the Structure-Properties of the PLA/PBAT Blends Incorporated with CNC.

Large amplitude oscillatory shear flow: Microstructural assessment of polymeric systems (2022)
Journal Article
Kamkar, M., Salehiyan, R., Goudoulas, T. B., Abbasi, M., Saengow, C., Erfanian, E., …Sundararaj, U. (2022). Large amplitude oscillatory shear flow: Microstructural assessment of polymeric systems. Progress in Polymer Science, 132, Article 101580. https://doi.org/10.1016/j.progpolymsci.2022.101580

Since the first publications of large amplitude oscillatory shear (LAOS) responses of polymeric materials in the 1960s, different approaches have been developed to express, analyze, and interpret nonlinear viscoelastic behavior of materials. LAOS is... Read More about Large amplitude oscillatory shear flow: Microstructural assessment of polymeric systems.

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH): Synthesis, properties, and applications - A review (2022)
Journal Article
Eraslan, K., Aversa, C., Nofar, M., Barletta, M., Gisario, A., Salehiyan, R., & Goksu, Y. A. (2022). Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH): Synthesis, properties, and applications - A review. European Polymer Journal, 167, Article 111044. https://doi.org/10.1016/j.eurpolymj.2022.111044

The development of biobased and environmental-friendly polymeric materials to replace petroleum-based plastics is one of the main global challenges nowadays. Among biopolymers, polyhydroxyalkanoates (PHAs) have gained increasing attention due to thei... Read More about Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH): Synthesis, properties, and applications - A review.

Effects of silica nanoparticles on the rheological properties and morphologies of polyvinyl alcohol/silver nanowire suspensions (2021)
Journal Article
Lee, S. H., Kim, S. Y., Salehiyan, R., & Hyun, K. (2021). Effects of silica nanoparticles on the rheological properties and morphologies of polyvinyl alcohol/silver nanowire suspensions. Korea-Australia rheology journal, 33(4), 321-331. https://doi.org/10.1007/s13367-021-0025-x

We investigated the effects of silica nanoparticles (SiNPs) on the rheological properties and microstructures of polyvinyl alcohol (PVA)/silver nanowire (AgNW) suspensions. For PVA/AgNW suspensions without SiNPs, rheological percolation threshold was... Read More about Effects of silica nanoparticles on the rheological properties and morphologies of polyvinyl alcohol/silver nanowire suspensions.

Dielectrorheology of Aspect-Ratio-Tailored Carbon Nanotube/Polyethylene Composites under Large Deformations: Implications for High-Temperature Dielectrics (2021)
Journal Article
Erfanian, E., Kamkar, M., Williams, D., Zamani Keteklahijani, Y., Salehiyan, R., Ray, S. S., …Sundararaj, U. (2021). Dielectrorheology of Aspect-Ratio-Tailored Carbon Nanotube/Polyethylene Composites under Large Deformations: Implications for High-Temperature Dielectrics. ACS Applied Nano Materials, 4(11), 11493-11504. https://doi.org/10.1021/acsanm.1c01698

In this work, advanced custom-synthesized carbon nanotube (CNT)-based polymer nanocomposites were designed and prepared for electrical applications, with an innovative strategy in terms of catalyst preparation. The physical structures of the CNTs wer... Read More about Dielectrorheology of Aspect-Ratio-Tailored Carbon Nanotube/Polyethylene Composites under Large Deformations: Implications for High-Temperature Dielectrics.

Influence of nanoparticles and their selective localization on the structure and properties of polylactide-based blend nanocomposites (2021)
Journal Article
Nofar, M., Salehiyan, R., & Ray, S. S. (2021). Influence of nanoparticles and their selective localization on the structure and properties of polylactide-based blend nanocomposites. Composites Part B: Engineering, 215, Article 108845. https://doi.org/10.1016/j.compositesb.2021.108845

This article critically reviews the influence of different nanoparticle localization on the final structure-property relationships of polylactide (PLA)-based blend nanocomposites. The effects of kinetics and thermodynamic parameters on the final loca... Read More about Influence of nanoparticles and their selective localization on the structure and properties of polylactide-based blend nanocomposites.

Top-down synthesis of graphene: A comprehensive review (2021)
Journal Article
Kumar, N., Salehiyan, R., Chauke, V., Joseph Botlhoko, O., Setshedi, K., Scriba, M., …Sinha Ray, S. (2021). Top-down synthesis of graphene: A comprehensive review. FlatChem, 27, Article 100224. https://doi.org/10.1016/j.flatc.2021.100224

Graphene research has become an emerging frontier in materials science because of its potential as a versatile material in multiple applications, from electronics, sensors, water treatment, batteries, displays, advanced composites, and coatings to bi... Read More about Top-down synthesis of graphene: A comprehensive review.

Preparation and characterization of PLA/PBAT/CNC blend nanocomposites (2021)
Journal Article
Sarul, D. S., Arslan, D., Vatansever, E., Kahraman, Y., Durmus, A., Salehiyan, R., & Nofar, M. (2021). Preparation and characterization of PLA/PBAT/CNC blend nanocomposites. Colloid and Polymer Science, 299(6), 987-998. https://doi.org/10.1007/s00396-021-04822-9

In this study, the effect of cellulose nanocrystals (CNCs) on the properties of polylactide (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) blends was investigated. Samples were prepared via (i) solution casting (SC) and (ii) combination of solu... Read More about Preparation and characterization of PLA/PBAT/CNC blend nanocomposites.