Skip to main content

Research Repository

Advanced Search

Outputs (21)

Livingston New Town: Art, History, People (2019)
Exhibition / Performance
Vettese, S., & Devison, N. Livingston New Town: Art, History, People. [3D printed objects]. 29 November 2019 - 22 November 2020

Livingston New Town: Art, History, People

Drawing on a wealth of photographs, illustrations and models, as well as historical artefacts from the museums and the archival collection of West Lothian, this exhibition explores the identity of Livingst... Read More about Livingston New Town: Art, History, People.

Livi Modern (2019)
Exhibition / Performance
Vettese, S., & Devison, N. Livi Modern. [artefacts]. Exhibited at St Andrew's Church, Livingston. 15 June 2019 - 15 June 2019

Livi Modern is a multimedia exhibition by four artists, Nicholas Devison, Dawn McDowell, Simon Montgomery and Sam Vettese, who have created artwork inspired by their shared interest in the surviving modernism of Livingston’s new town. In the early 19... Read More about Livi Modern.

A study of childrens' relationship with making and use of CAD in collaborative, physical and digital environments : implications for learning and open access fabrication (2018)
Journal Article
Vettese, S., Allan, D., & Thompson, P. (2018). A study of childrens' relationship with making and use of CAD in collaborative, physical and digital environments : implications for learning and open access fabrication. Design and Technology Education: An International Journal, 23(3), 10-25

In this paper, the researchers will investigate different ways in which school age, 'generation net' children learn, through non-linear, mediated, collaborative ‘making’ environments, enabled by online communities of ‘citizen practitioners' and maker... Read More about A study of childrens' relationship with making and use of CAD in collaborative, physical and digital environments : implications for learning and open access fabrication.

AHRC Design Research for Change Showcase (2018)
Exhibition / Performance
Vettese, S., Anastasiadou, C., Calder, L., Vones, K., Burton, K., & Allan, D. AHRC Design Research for Change Showcase. 20 September 2018 - 23 September 2018

No abstract available.

Design Research For Change (2018)
Book
Vettese, S. (2018). Design Research For Change. Lancaster University

No abstract available.

Western and Eastern Building Conservation Philosophies: Perspectives on Permanence and Impermanence (2018)
Journal Article
Forster, A. M., Thomson, D., Richards, K., Pilcher, N., & Vettese, S. (2019). Western and Eastern Building Conservation Philosophies: Perspectives on Permanence and Impermanence. International Journal of Architectural Heritage, 13(6), 870-885. https://doi.org/10.1080/15583058.2018.1490827

In this conceptual paper, we illuminate Western building conservation philosophy practice with insights into Eastern conservation philosophy and associated aesthetic understanding. We frame dialogue recognising individual and societal perspectives on... Read More about Western and Eastern Building Conservation Philosophies: Perspectives on Permanence and Impermanence.

1.5cm Unicorn Souvenirs (2018)
Physical Artefact
Vettese, S., & Anastasiadou, C. 1.5cm Unicorn Souvenirs. [Physical artefact]. Edinburgh Napier University

This study explored the possibilities and challenges that 3D printing could generate in the production and consumption of tourist souvenirs. The team undertook a study in collaboration with Historic Environment Scotland (previously Historic Scotland)... Read More about 1.5cm Unicorn Souvenirs.

Customisable 3D printed model of Robin Hood Gardens (2018)
Physical Artefact
Vettese, S., & Vones, K. Customisable 3D printed model of Robin Hood Gardens. [Physical Artefact]. Edinburgh Napier University

This research proposed to utilise the processes and experiences of designing and making 3D printed 'souvenirs of place', with regards to Modern 'overlooked' heritage. The public were asked to interact with 3D modelling technology, to personalise a pr... Read More about Customisable 3D printed model of Robin Hood Gardens.

3D printed St Gabriel’s Chapel musical souvenir with interchangeable components (2018)
Physical Artefact
Vettese, S., Vones, K., Allan, D., & Burton, K. 3D printed St Gabriel’s Chapel musical souvenir with interchangeable components. [Physical Artefact]. Edinburgh Napier University

The research group have created a musical, 3D printed souvenir with interchangeable components so that the owner can create their own, personalised version of the musical experience after they have visited the church and experienced the musical perfo... Read More about 3D printed St Gabriel’s Chapel musical souvenir with interchangeable components.

3D Printed souvenir of Craigsbank Church (2018)
Physical Artefact
Vettese, S., & Vones, K. 3D Printed souvenir of Craigsbank Church. [Physical Artefact]. Edinburgh Napier University

The aim of this project is to evaluate how in-situ and interactive musical compositions and digital craft may mediate the understanding, appreciation and value attached to, as yet, unloved, Modern architectural heritage.

Contemporary musical comp... Read More about 3D Printed souvenir of Craigsbank Church.

3D printed building sections and joining pieces, inspired by the architecture of Basil Spence (2018)
Physical Artefact
Vettese, S., & Vones, K. 3D printed building sections and joining pieces, inspired by the architecture of Basil Spence. [Physical Artefact]. Edinburgh Napier University

A series of one-day workshop events were staged to engage the public with the architecture of Basil Spence, firstly at Edinburgh Napier University’s Maker Space and then within Edinburgh University’s Library, designed by Basil Spence. Participants we... Read More about 3D printed building sections and joining pieces, inspired by the architecture of Basil Spence.

In Situ, 3D Printed Heritage Souvenirs: Challenging Conventional Spaces and Culture (2018)
Journal Article
Vettese, S., & Anastasiadou, C. (2018). In Situ, 3D Printed Heritage Souvenirs: Challenging Conventional Spaces and Culture. The Journal of Peer Production, 12, 27-39

This paper outlines an Arts and Humanities Research Council (AHRC) funded Design Innovation Development Award project titled ' Enhancing the Authenticity and Sustainability of the Visitor Heritage Experience through 3D Printing Technology', undertake... Read More about In Situ, 3D Printed Heritage Souvenirs: Challenging Conventional Spaces and Culture.

Enhancing the Tourist Heritage Experience through In-Situ, Customisable 3D - Printed Souvenirs (2018)
Book Chapter
Anastasiadou, C., Vettese, S., & Calder, L. (2018). Enhancing the Tourist Heritage Experience through In-Situ, Customisable 3D - Printed Souvenirs. In L. Egberts, & M. D. Alvarez (Eds.), Heritage and Tourism : Places, Imageries and the Digital Age (151-171). Amsterdam University Press. https://doi.org/10.5117/9789462985353

This research set out to investigate whether technological innovations in design and the personalisation of tourist souvenirs through 3D printing, could offer opportunities to break away from stereotypically throwaway, low quality, mass manufactured... Read More about Enhancing the Tourist Heritage Experience through In-Situ, Customisable 3D - Printed Souvenirs.

3D printable recycled textiles : material innovation and a resurrection of the forgotten ‘shoddy’ industry (2017)
Presentation / Conference Contribution
Vettese, S. (2017, September). 3D printable recycled textiles : material innovation and a resurrection of the forgotten ‘shoddy’ industry. Presented at Intersections, Loughborough University London

This paper will disseminate an interdisciplinary project, undertaken at Edinburgh Napier University between the Design and Advanced Materials. Several 3D printable materials are commercially available that use recycled material, but none that incorpo... Read More about 3D printable recycled textiles : material innovation and a resurrection of the forgotten ‘shoddy’ industry.

3D Printable Recycled Textiles: Material Innovation and a Resurrection of the Forgotten “shoddy” Industry (2017)
Journal Article
Vettese Forster, S. (2017). 3D Printable Recycled Textiles: Material Innovation and a Resurrection of the Forgotten “shoddy” Industry. Journal of Textile Design Research and Practice, 5(2), 138-156. https://doi.org/10.1080/20511787.2018.1449073

This paper will disseminate an interdisciplinary project, undertaken at Edinburgh Napier University between the Design and Advanced Materials. Several 3D printable materials are commercially available that use recycled material, including post consum... Read More about 3D Printable Recycled Textiles: Material Innovation and a Resurrection of the Forgotten “shoddy” Industry.

A study of the multi generational relationship with making through mediated designing in collaborative, digital environments: implications for learning and open access fabrication (2017)
Presentation / Conference Contribution
Vettese, S., Thompson, P., & Allan, D. (2016, November). A study of the multi generational relationship with making through mediated designing in collaborative, digital environments: implications for learning and open access fabrication. Presented at Open Design for E-very-thing

In this paper, the researchers will investigate different ways in which school age, 'generation net' children learn, through non-linear, mediated, collaborative ‘making’ environments, enabled by online communities of ‘citizen practitioners' and maker... Read More about A study of the multi generational relationship with making through mediated designing in collaborative, digital environments: implications for learning and open access fabrication.

An exploration of the sustainable and aesthetic possibilities of 3D printing onto textiles as an alternative to traditional surface decoration (2017)
Presentation / Conference Contribution
Burn, K., Vettese, S., & Shackleton, J. (2016, November). An exploration of the sustainable and aesthetic possibilities of 3D printing onto textiles as an alternative to traditional surface decoration. Presented at Circular Transitions, London, UK

Embellishment, in a fashion and textile context, can be considered an extraneous decorative process that has a significant detrimental impact on the environment. However, aesthetic and cultural theories, in addition to consumer appeal, show that it i... Read More about An exploration of the sustainable and aesthetic possibilities of 3D printing onto textiles as an alternative to traditional surface decoration.

In Situ 3D Printed Souvenirs and their Affect on Visitors Engagement with Built Heritage (2016)
Presentation / Conference Contribution
Vettese, S., & Anastasiadou, C. (2016, April). In Situ 3D Printed Souvenirs and their Affect on Visitors Engagement with Built Heritage. Presented at In this place : cumulus association biannual international conference, Nottingham, UK

In this study, visitors’ perception and engagement with built heritage surroundings was investigated in relation to their interaction with 3d printed souvenirs which reflected architectural features of the site. A 3D printer was set up in Stirling Ca... Read More about In Situ 3D Printed Souvenirs and their Affect on Visitors Engagement with Built Heritage.

Making Tourist Experiences Through Personalisable 3D Printed Souvenirs (2016)
Journal Article
Vettese Forster, S., Anastasiadou, C., & Calder, L. (2016). Making Tourist Experiences Through Personalisable 3D Printed Souvenirs. Making Futures, IV,

Gift shops are common in most museums and galleries that provide visitors with shopping experiences as well as the opportunity to transform their intangible experience of the visit to a tangible memory through the purchase of a souvenir. It can also... Read More about Making Tourist Experiences Through Personalisable 3D Printed Souvenirs.