Constructing shared professional vision in design work: the role of visual objects and their material mediation (2019)
Journal Article
Comi, A., Jaradat, S., & Whyte, J. (2019). Constructing shared professional vision in design work: the role of visual objects and their material mediation. Design Studies, 64, 90-123. https://doi.org/10.1016/j.destud.2019.06.003

The design process requires coordination between professions that have different ways of seeing. Using ethnographic data from a building project, this paper explores how architects and engineers mobilize visual objects to coordinate their professiona... Read More about Constructing shared professional vision in design work: the role of visual objects and their material mediation.

Reanalysis of some in situ compaction test results (2019)
Presentation / Conference Contribution
Imre, E., Lorincz, J., Trang, P., Casini, F., Guida, G., Fityus, S., Barreto, D., & Singh, V. (2019, September). Reanalysis of some in situ compaction test results. Presented at The XVII European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE 2019), Reykjavik, Iceland

Brandl (1977) presents the grading curve results of an investigation of particle disintegration of natural sandy gravel and crushed stone bedding courses due to in situ compaction and the action of construction traffic in different civil engineering... Read More about Reanalysis of some in situ compaction test results.

An experimental study on restoration technique for the Acropolis of Athens: developing the experimental set-up for pull-out testing of titanium bars embedded in marble blocks (2019)
Journal Article
Dakanali, I., & Marinelli, A. (2019). An experimental study on restoration technique for the Acropolis of Athens: developing the experimental set-up for pull-out testing of titanium bars embedded in marble blocks. Frattura ed Integrità Strutturale (Fracture and Structural Integrity), 13(50), 370-382. https://doi.org/10.3221/IGF-ESIS.50.31

The present work aims at investigating the mechanisms activated during the extraction of titanium bars from a marble volume (pull-out phenomenon), used for rejoining fragmented marble structural members at the monuments of the Acropolis of Athens. Th... Read More about An experimental study on restoration technique for the Acropolis of Athens: developing the experimental set-up for pull-out testing of titanium bars embedded in marble blocks.

Influence of geotextile encasement in triaxial tests on gravel (2019)
Presentation / Conference Contribution
Miranda, M., da Costa, A., Castro, J., Sagaseta, C., & Cañizal, J. (2017, September). Influence of geotextile encasement in triaxial tests on gravel. Presented at 19th International Conference on Soil Mechanics and Geotechnical Engineering

Stone columns installed in extremely soft soils may significantly reduce the effectiveness of this treatment due to the insufficient lateral confinement provided by the soft soil. The encasement of columns with geotextiles is commonly used in these s... Read More about Influence of geotextile encasement in triaxial tests on gravel.

Topology optimization of elastoplastic structures (2019)
Thesis
Li, M. Topology optimization of elastoplastic structures. (Thesis). Edinburgh Napier University. http://researchrepository.napier.ac.uk/Output/2086333

Topology optimization technique has been used as an efficient tool that optimizes material layout within a given space to obtain the desired functional performance. So far, topology optimization has been mainly focused on linear problems and less att... Read More about Topology optimization of elastoplastic structures.

Durability of functionalized carbon structures with optical fiber sensors in a highly alkaline concrete environment. (2019)
Journal Article
Bremer, K., Alwis, L., Zheng, Y., Weigand, F., Kuhne, M., Helbig, R., & Roth, B. (2019). Durability of functionalized carbon structures with optical fiber sensors in a highly alkaline concrete environment. Applied Sciences, 9(12), https://doi.org/10.3390/app9122476

The paper presents an investigation into the durability of functionalized carbon structures (FCS) in a highly alkaline concrete environment. First, the suitability of optical fibers with different coatings—i.e., acrylate, polyimide, or carbon—for the... Read More about Durability of functionalized carbon structures with optical fiber sensors in a highly alkaline concrete environment..

The geoengineering approach to the study of rivers and reservoirs (2019)
Journal Article
Corbett, P. W., Owen, A., Hartley, A., Pla-Pueyo, S., Barreto Gonzalez, D., Hackney, C., & Kape, S. (2019). The geoengineering approach to the study of rivers and reservoirs. Geological Society Special Publications, https://doi.org/10.1144/SP488-2018-98

This volume contains contributions for two meetings held to explore the links between geoscience and engineering in rivers and reservoirs (surface and subsurface). The first meeting was held in Brazil and as a result the volume contains many contrib... Read More about The geoengineering approach to the study of rivers and reservoirs.

Intensity-modulated PM-PCF Sagnac loop in a DWDM setup for strain measurement (2019)
Journal Article
Alwis, L., Madry, M., & Beres-Pawlik, E. (2019). Intensity-modulated PM-PCF Sagnac loop in a DWDM setup for strain measurement. Applied Sciences, 9(11), https://doi.org/10.3390/app9112374

A novel intensity-modulated Sagnac loop sensor based on polarization-maintaining photonic crystal fiber (PM-PCF) in a setup with a dense wavelength division multiplexer (DWDM) for strain measurement is presented. The sensor head is made of PM-PCF spl... Read More about Intensity-modulated PM-PCF Sagnac loop in a DWDM setup for strain measurement.

Simultaneous Measurement of Temperature and Relative Humidity Using a Dual-Wavelength Erbium-Doped Fiber Ring Laser Sensor (2019)
Journal Article
Mądry, M., Alwis, L., Binetti, L., Pajewski, Ł., & Bereś-Pawlik, E. (2019). Simultaneous Measurement of Temperature and Relative Humidity Using a Dual-Wavelength Erbium-Doped Fiber Ring Laser Sensor. IEEE Sensors Journal, 19(20), 9215-9220. https://doi.org/10.1109/JSEN.2019.2922041

A fiber ring laser sensor setup utilizing FBGs (Fiber Bragg Gratings) for simultaneous measurement of ambient temperature and relative humidity (RH) is presented. Two FBGs are incorporated as tunable filters for a dual-wavelength laser emission, wher... Read More about Simultaneous Measurement of Temperature and Relative Humidity Using a Dual-Wavelength Erbium-Doped Fiber Ring Laser Sensor.

Multifaceted Productivity Comparison of Off-Site Timber Manufacturing Strategies in Mainland Europe and the United Kingdom (2019)
Journal Article
Duncheva, T., & Bradley, F. F. (2019). Multifaceted Productivity Comparison of Off-Site Timber Manufacturing Strategies in Mainland Europe and the United Kingdom. Journal of Construction Engineering and Management, 145(8), https://doi.org/10.1061/%28ASCE%29CO.1943-7862.0001641

Offsite construction methods have been suggested as a necessity for improving the efficiency and productivity of the construction industry through implementation of automation and lean principles in a controlled factory environment, known as Modern M... Read More about Multifaceted Productivity Comparison of Off-Site Timber Manufacturing Strategies in Mainland Europe and the United Kingdom.

Super-Wide Impedance Bandwidth Planar Antenna for Microwave and Millimetre-Wave Applications (2019)
Journal Article
Alibakhshikenari, M., Virdee, B. S., See, C. H., Abd-Alhameed, R. A., Falcone, F., & Limiti, E. (2019). Super-Wide Impedance Bandwidth Planar Antenna for Microwave and Millimetre-Wave Applications. Sensors, 19(10), https://doi.org/10.3390/s19102306

The feasibility study of a novel configuration for a super-wide impedance planar antenna is presented based on a 2×2 microstrip patch antenna (MPA) using CST Microwave Studio. The antenna comprises a symmetrical arrangement of four-square patches tha... Read More about Super-Wide Impedance Bandwidth Planar Antenna for Microwave and Millimetre-Wave Applications.

Particle-scale interaction in sand-rubber mixtures and their influence on energy dissipation mechanisms (2019)
Journal Article
Fonseca, J., Riaz, A., Bernal-Sanchez, J., Barreto Gonzalez, D., McDougall, J., Miranda Manzanares, M., Marinelli, A., & Dimitriadi, V. (2019). Particle-scale interaction in sand-rubber mixtures and their influence on energy dissipation mechanisms. Géotechnique Letters, 9(4), 1-6. https://doi.org/10.1680/jgele.18.00221

Sand-rubber mixture (SRm) behaviour is affected by rubber content (RC) whilst dissipation in sands is caused by inter-particle sliding. Dissipation in SRm is as, or more significant than in sands. However, the mechanisms of dissipation in SRm are not... Read More about Particle-scale interaction in sand-rubber mixtures and their influence on energy dissipation mechanisms.

Particle loss: An initial investigation into size effects and stress-dilatancy (2019)
Journal Article
McDougall, J., Kelly, D., & Barreto, D. (2019). Particle loss: An initial investigation into size effects and stress-dilatancy. Soils and Foundations, https://doi.org/10.1016/j.sandf.2019.03.002

Drained triaxial tests have been performed to explore the effect of particle loss on shearing behaviour and critical states in granular mixtures. The mixtures comprise Leighton Buzzard sand (d50 = 0.8 mm), to which was added 15% by mass of salt parti... Read More about Particle loss: An initial investigation into size effects and stress-dilatancy.

Lightweight design of direct-drive wind turbine electrical generators: A comparison between steel and composite material structures (2019)
Journal Article
Jaen Sola, P., McDonald, A., & Oterkus, E. (2019). Lightweight design of direct-drive wind turbine electrical generators: A comparison between steel and composite material structures. Ocean Engineering, 181, 330-341. https://doi.org/10.1016/j.oceaneng.2019.03.053

Direct-drive generators for wind turbines are high torque, low speed machines which require a heavy robust structure to maintain the air-gap clearance open and stable. The mass of the structural material can be assessed at the early stages of the des... Read More about Lightweight design of direct-drive wind turbine electrical generators: A comparison between steel and composite material structures.

The effects of driver fatigue, gender, and distracted driving on perceived and observed aggressive driving behavior: A correlated grouped random parameters bivariate probit approach. (2019)
Journal Article
Fountas, G., Pantangi, S. S., Hulme, K. F., & Anastasopoulos, P. C. (2019). The effects of driver fatigue, gender, and distracted driving on perceived and observed aggressive driving behavior: A correlated grouped random parameters bivariate probit approach. Analytic Methods in Accident Research, 22, https://doi.org/10.1016/j.amar.2019.100091

Previous research has shown that the determinants of perceived and observed aggressive driving behavior may differ. However, the consideration of major sources of aggressive patterns may introduce additional variations in the effect of such determin... Read More about The effects of driver fatigue, gender, and distracted driving on perceived and observed aggressive driving behavior: A correlated grouped random parameters bivariate probit approach..

Wearable technology and workplace epidemiology: a practical example from the field of hand-arm vibration (2019)
Presentation / Conference Contribution
Taylor, M. (2019, April). Wearable technology and workplace epidemiology: a practical example from the field of hand-arm vibration. Poster presented at The 12th UK/Ireland 1-day Meeting on Occupational and Environmental Epidemiology, Surgeons' Hall Museums, Edinburgh, United Kingdom

This work investigates the application of wearable technology for the collection of exposure data relevant to the study of Hand Arm Vibration Syndrome. Wearable technology designed for mass adoption coupled with the IoT has yielded a unique data set... Read More about Wearable technology and workplace epidemiology: a practical example from the field of hand-arm vibration.

Influence of between-joists bridging elements on static and dynamic response of wood joisted floors (2019)
Journal Article
Khokhar, A., Chui, Y. H., & Smith, I. (2019). Influence of between-joists bridging elements on static and dynamic response of wood joisted floors. Engineering Structures, 188, 362-368. https://doi.org/10.1016/j.engstruct.2019.03.039

Excessive vertical vibration of lightweight floors caused by walking or similar activities can be annoying to building occupants. Previous studies have shown that the vibrational performance of floors having wood joists is enhanced by installing one... Read More about Influence of between-joists bridging elements on static and dynamic response of wood joisted floors.