Qualifying the Sustainability of Novel Designs and Existing Solutions for Post-Disaster and Post-Conflict Sheltering (2020)
Journal Article
Alshawawreh, L., Alshawawreh, L., Pomponi, F., Pomponi, F., D'Amico, B., D’Amico, B., Snaddon, S., Snaddon, S., Guthrie, P., & Guthrie, P. (2020). Qualifying the Sustainability of Novel Designs and Existing Solutions for Post-Disaster and Post-Conflict Sheltering. Sustainability, 12(3), Article 890. https://doi.org/10.3390/su12030890

During the course of 2018, 70.8 million people globally were forcibly displaced due to natural disasters and conflicts—a staggering increase of 2.9 million people compared to the previous year’s figure. Displaced people cluster in refugee camps which... Read More about Qualifying the Sustainability of Novel Designs and Existing Solutions for Post-Disaster and Post-Conflict Sheltering.

Influence of parameters affecting the racking strength of partially anchored timber framed walls (2018)
Presentation / Conference Contribution
Zhang, B., Dohnju, R., Kermani, A., Porteous, J., & D'Amico, B. (2018, August). Influence of parameters affecting the racking strength of partially anchored timber framed walls. Presented at World Conference on Timber Engineering (WCTE) 2018, Seoul, Korea

A test-based assessment of the racking performance of partially anchored timber framed walls is described in this paper. The tested wall specimens were constructed and tested at the Centre for Timber Engineering (Edinburgh Napier University, UK) cons... Read More about Influence of parameters affecting the racking strength of partially anchored timber framed walls.

Machine Learning for Sustainable Structures: A Call for Data (2018)
Journal Article
D'Amico, B., Myers, R., Sykes, J., Voss, E., Cousins-Jenvey, B., Fawcett, W., Richardson, S., Kermani, A., & Pomponi, F. (2019). Machine Learning for Sustainable Structures: A Call for Data. Structures, 19, 1-4. https://doi.org/10.1016/j.istruc.2018.11.013

Buildings are the world's largest contributors to energy demand, greenhouse gases (GHG) emissions, resource consumption and waste generation. An unmissable opportunity exists to tackle climate change, global warming, and resource scarcity by rethinki... Read More about Machine Learning for Sustainable Structures: A Call for Data.

Sustainability tool to optimise material quantities of steel in the construction industry (2018)
Presentation / Conference Contribution
D'Amico, B., & Pomponi, F. (2018, April). Sustainability tool to optimise material quantities of steel in the construction industry. Presented at 25th CIRP Life Cycle Engineering (LCE) Conference, Copenhagen, Denmark

The steel industry is arguably one of the most pollutant manufacturing sectors. The vast majority of steel produced worldwide is employed by the construction industry, mostly under the form of profile members for structural use, and it is primarily u... Read More about Sustainability tool to optimise material quantities of steel in the construction industry.

Carbon mitigation in the built environment: an input-output analysis of building materials and components in the UK (2018)
Presentation / Conference Contribution
Pomponi, F., & D'Amico, B. (2018, April). Carbon mitigation in the built environment: an input-output analysis of building materials and components in the UK. Presented at 25th CIRP Life Cycle Engineering (LCE) Conference, Copenhagen, Denmark

The circular economy has set out a new paradigm for a much
needed shift from eco-efficiency to eco-effectiveness. Buildings are top contributor globally for resource use and waste creation. Therefore, any improvement in an effective use of building... Read More about Carbon mitigation in the built environment: an input-output analysis of building materials and components in the UK.

Accuracy and reliability: a computational tool to minimise steel mass and carbon emissions at early-stage structural design (2018)
Journal Article
D’Amico, B., & Pomponi, F. (2018). Accuracy and reliability: a computational tool to minimise steel mass and carbon emissions at early-stage structural design. Energy and Buildings, 168, 236-250. https://doi.org/10.1016/j.enbuild.2018.03.031

Building structures often represent the element with the largest mass in a building project, with significant effects on the buildings life cycle environmental impacts. Amongst structural materials, steel is characterised by its suitability to a larg... Read More about Accuracy and reliability: a computational tool to minimise steel mass and carbon emissions at early-stage structural design.

Structural Design with Reclaimed Materials: an Elastic Gridshell out of Skis (2017)
Presentation / Conference Contribution
Colabella, S., D'Amico, B., Hoxha, E., & Fivet, C. (2017, September). Structural Design with Reclaimed Materials: an Elastic Gridshell out of Skis. Presented at IASS Annual Symposium 2017 “Interfaces: architecture.engineering.science”

This paper presents the design and construction of a 36m² gridshell, the rigidity of which is achieved through the bending of an initially flat grid of 210 reclaimed skis. The generated waste for its production is near zero as it is mostly built from... Read More about Structural Design with Reclaimed Materials: an Elastic Gridshell out of Skis.

BEETLE² (2017)
Digital Artefact
D'Amico, B., & Pomponi, F. (2017). BEETLE². [http://www.food4rhino.com/app/beetle2]

BEETLE², (Built Environment Efficiency Tool for Low Environmental Externalities) is a tool aimed at promoting an efficient and effective use of resources in the built environment. Beetles can be found anywhere in the world and so do buildings. Beetle... Read More about BEETLE².

A Method to Facilitate Uncertainty Analysis in LCAs of Buildings (2017)
Journal Article
Pomponi, F., D'Amico, B., & Moncaster, A. M. (2017). A Method to Facilitate Uncertainty Analysis in LCAs of Buildings. Energies, 10(4), 524. https://doi.org/10.3390/en10040524

Life cycle assessment (LCA) is increasingly becoming a common technique to assess the embodied energy and carbon of buildings and their components over their life cycle. However, the vast majority of existing LCAs result in very definite, determinist... Read More about A Method to Facilitate Uncertainty Analysis in LCAs of Buildings.

Racking performance of Platform timber framed walls assessed by rigid body relaxation technique (2016)
Journal Article
D'Amico, B., Kermani, A., Porteous, J., Dhonju, R., & Zhang, B. (2016). Racking performance of Platform timber framed walls assessed by rigid body relaxation technique. Construction and Building Materials, 129, 148-158. https://doi.org/10.1016/j.conbuildmat.2016.10.106

A new method to assess the raking performance of Platform timber framed walls, is provided in this study: each component of the unit wall assembly is assumed as rigid, hence allowing to drastically reduce the overall number of DoFs involved within th... Read More about Racking performance of Platform timber framed walls assessed by rigid body relaxation technique.

Building timber gridshells with air: Numerical simulations and technique challenges (2016)
Presentation / Conference Contribution
Liuti, A., D'Amico, B., & Pugnale, A. (2016, July). Building timber gridshells with air: Numerical simulations and technique challenges. Presented at International Conference Structures and Architecture 2016

Construction has always been a fascinating and challenging aspect of timber gridshells. So far, only three techniques have successfully been used for the erection of such structures: the so-called ‘lift-up’, ‘push-up’ and ‘ease-down’ (Quinn et al. 20... Read More about Building timber gridshells with air: Numerical simulations and technique challenges.

Timber Grid-shell Structures: form-finding, analysis and optimisation (2015)
Thesis
D'Amico, B. Timber Grid-shell Structures: form-finding, analysis and optimisation. (Thesis). Edinburgh Napier University. http://researchrepository.napier.ac.uk/id/eprint/9833

This thesis aims to provide a set of tools for analysis and design of free-form timber grid-shells. It provides a brief introduction on the relationship between shape and structural behaviour of grid-shells, followed by an introduction to actively-be... Read More about Timber Grid-shell Structures: form-finding, analysis and optimisation.

Timber gridshells: Numerical simulation, design and construction of a full scale structure (2015)
Journal Article
D'Amico, B., Kermani, A., Zhang, H., Pugnale, A., Colabella, S., & Pone, S. (2015). Timber gridshells: Numerical simulation, design and construction of a full scale structure. Structures, 3, 227-235. https://doi.org/10.1016/j.istruc.2015.05.002

Timber gridshell structures, such as the Multihalle for the federal garden festival in Mannheim or the Downland
Museum, have been the result of a creative–generative process that indissolubly ‘welded’ the structural contribution
to that of form exp... Read More about Timber gridshells: Numerical simulation, design and construction of a full scale structure.

Optimization of cross-section of actively bent grid shells with strength and geometric compatibility constraints (2015)
Journal Article
D’Amico, B., Kermani, A., Zhang, H., Shepherd, P., & Williams, C. (2015). Optimization of cross-section of actively bent grid shells with strength and geometric compatibility constraints. Computers and Structures, 154, 163-176. https://doi.org/10.1016/j.compstruc.2015.04.006

The use of bending as self forming process allows the realization of shape-resistant systems, such as grid shell structures. Here, a numerical method for optimisation of the cross-section of actively bent structures is introduced. For a given load di... Read More about Optimization of cross-section of actively bent grid shells with strength and geometric compatibility constraints.

Developing a fuzzy new -generation whole-life cost model for medium-sized office buildings. (2014)
Presentation / Conference Contribution
Tokede, O. O., D'Amico, B., Gupta, N. K., & Wamuziri, S. (2014, October). Developing a fuzzy new -generation whole-life cost model for medium-sized office buildings. Presented at ICEC IX World Congress Re-Engineering Total Cost Management

Purpose of this paper
The purpose of this paper is to explore the investment appraisal aspects of the new-generation whole-life cost (NWLC) model and develops a fuzzy new-generation whole-life cost model for 25 simulated configurations of a steel-ty... Read More about Developing a fuzzy new -generation whole-life cost model for medium-sized office buildings..

A form finding method for post formed timber grid shell structures. (2014)
Presentation / Conference Contribution
D'Amico, B., Kermani, A., & Zhang, H. (2014, July). A form finding method for post formed timber grid shell structures. Presented at World Conference Timber Engineering

Timber grid shells provide efficient ways of covering large openings with relatively small amount of materials. With three-dimensional CAD software, it is now possible to model a free-form surface and discretize it in smaller straight elements, thus... Read More about A form finding method for post formed timber grid shell structures..

Modelling of geometric imperfections in numerical simulations of built-up cold-formed steel beams. (2011)
Presentation / Conference Contribution
Portioli, F., D'Amico, B., Di Lorenzo, G., & Landolfo, R. (2011, September). Modelling of geometric imperfections in numerical simulations of built-up cold-formed steel beams. Presented at 6th International Conference on Thin-Walled Structures

This paper is concerned with the modelling of geometric imperfections in the finite element analysis of a built-up cold-formed beam assembled with mechanical fasteners. The objective of the study was to investigate the effects of contact interactions... Read More about Modelling of geometric imperfections in numerical simulations of built-up cold-formed steel beams..