Outputs (266)

Multi-Faceted Maximization of a Microgrid-Incorporated Hybrid Photovoltaic-Wind-Battery-Diesel System in Basra, Iraq (2024)
Presentation / Conference Contribution
Alsultan, A. M. T., Bani, N. A., Muhtazaruddin, M. N., & Muhammad-Sukki, F. (2024, October). Multi-Faceted Maximization of a Microgrid-Incorporated Hybrid Photovoltaic-Wind-Battery-Diesel System in Basra, Iraq. Presented at 2024 IEEE 12th Region 10 Humanitarian Technology Conference (R10-HTC), Kuala Lumpur, Malaysia

Hybrid Renewable Energy Sources (HRES) in microgrids present a cost-effective option for supplying power to remote areas. This research focuses on optimizing HRES systems for Base Transceiver stations in Basra, Iraq, by using the Multiobjective Impro... Read More about Multi-Faceted Maximization of a Microgrid-Incorporated Hybrid Photovoltaic-Wind-Battery-Diesel System in Basra, Iraq.

Hydrogen Production Rate of Temperature Controlled Proton Exchange Membrane Electrolyzer (2024)
Presentation / Conference Contribution
Hussnain, U., Bani, N. A., Muhtazaruddin, M. N., & Muhammad-Sukki, F. (2024, October). Hydrogen Production Rate of Temperature Controlled Proton Exchange Membrane Electrolyzer. Presented at 2024 IEEE 12th Region 10 Humanitarian Technology Conference (R10-HTC), Kuala Lumpur, Malaysia

This study investigates the hydrogen production through the Proton exchange membrane electrolyzer. It focuses on the hydrogen production rates, power, voltage and stack temperature to elaborate the operating dynamic behavior and efficiency of the sys... Read More about Hydrogen Production Rate of Temperature Controlled Proton Exchange Membrane Electrolyzer.

Fuzzy Delphi Method For Smart Grid Enabler Framework Development Towards Residential Energy Conservation Strategies (2024)
Presentation / Conference Contribution
Abdul Razak, A. H. N., Ahmad, N. A., Radin Abdul Halim, R. Z., & Muhammad Sukki, F. (2024, October). Fuzzy Delphi Method For Smart Grid Enabler Framework Development Towards Residential Energy Conservation Strategies. Presented at 4th International Conference on Built Environment and Engineering 2024 (IConBEE2024), Pulau Pinang, Malaysia

The global implementation of smart grids has revolutionized the electricity grid, including in Malaysia, where Tenaga Nasional Berhad leads the initiative. This Smart Grid system is akin to the internet of electricity, serving as a pivotal element in... Read More about Fuzzy Delphi Method For Smart Grid Enabler Framework Development Towards Residential Energy Conservation Strategies.

Analysis of a Novel Solar Concentrator for Building Integrated Photovoltaic Application (2024)
Presentation / Conference Contribution
Kumar, A. K., Muhammad-Sukki, F., Abu-Bakar, S. H., Bani, N. A., Mas'ud, A. A., Ahmed, J., Ahmad, N., & Wan-Mohtar, W. A. A. Q. I. (2024, July). Analysis of a Novel Solar Concentrator for Building Integrated Photovoltaic Application. Presented at 2024 IEEE Symposium on Industrial Electronics & Applications (ISIEA), Kuala Lumpur, Malaysia

This research work focuses on developing a novel solar concentrator – a rectangular-based rotationally asymmetrical compound parabolic concentrator (RRACPC) design. This design is unique in its rectangular exit aperture, entrance aperture, and half-a... Read More about Analysis of a Novel Solar Concentrator for Building Integrated Photovoltaic Application.

Nexus between Building-Integrated Photovoltaics (BIPV) and Cultural Heritage: Optical Characterisation of Screen-Printed Traditional Symbols on Solar Cells (2024)
Presentation / Conference Contribution
Awuku, S. A., Bennadji, A., Muhammad-Sukki, F., Prabhu, R., & Sellami, N. (2024, June). Nexus between Building-Integrated Photovoltaics (BIPV) and Cultural Heritage: Optical Characterisation of Screen-Printed Traditional Symbols on Solar Cells. Presented at 4th Annual Conference Solar And Wind Power, Edinburgh

This preliminary study adopts a screen-printing technique to transfer traditional Adinkra symbols onto monocrystalline solar cells. The study reveals that custom patterns for the top contact design of solar cells are achievable through direct screen-... Read More about Nexus between Building-Integrated Photovoltaics (BIPV) and Cultural Heritage: Optical Characterisation of Screen-Printed Traditional Symbols on Solar Cells.

Aero-Servo-Elastic Simulation of the International Energy Agency’s 15MW Reference Wind Turbine for Direct-Drive Generator Integrity Modelling (2024)
Presentation / Conference Contribution
Bichan, M., Jaen-Sola, P., Sellami, N., & Muhammad-Sukki, F. (2024, June). Aero-Servo-Elastic Simulation of the International Energy Agency’s 15MW Reference Wind Turbine for Direct-Drive Generator Integrity Modelling. Presented at ASWEC 2024: 4th Annual Conference Solar and Wind Power, Edinburgh

This paper presents the development of a full turbine model and subsequent aero-servo-elastic simulation of the IEA 15MW Reference Wind Turbine, such that aerodynamic loads can be obtained and then applied to a simplified drivetrain in Finite-Element... Read More about Aero-Servo-Elastic Simulation of the International Energy Agency’s 15MW Reference Wind Turbine for Direct-Drive Generator Integrity Modelling.

Preface: The 4th Annual Conference Solar and Wind Power (2024)
Presentation / Conference Contribution
Sellami, N., Muhammad-Sukki, F., & Sola, P. (2024, June). Preface: The 4th Annual Conference Solar and Wind Power. Presented at ASWEC 2024: 4th Annual Conference on Solar and Wind Power, Edinburgh

Abstract not available.

Simulation of Partial Discharge Phenomenon in Epoxy-Resins Insulation Under Very Low and High Stressing Frequencies (2024)
Presentation / Conference Contribution
Aliyu, B. D., Rohani, M. N. K. H., Musa, U., Sulaiman, S. H., Jibril, Y., Mas'ud, A. A., Muhammad-Sukki, F., & Jamil, A. I. M. (2024, March). Simulation of Partial Discharge Phenomenon in Epoxy-Resins Insulation Under Very Low and High Stressing Frequencies. Presented at 2024 IEEE 4th International Conference in Power Engineering Applications (ICPEA 2024), Pulau Pinang, Malaysia

Partial discharge (PD) degrades the quality of insulation systems, and its impact becomes even more severe with ageing. Several studies have revealed PD activity to be environmental and test factors dependent. Among the several test factors, the exci... Read More about Simulation of Partial Discharge Phenomenon in Epoxy-Resins Insulation Under Very Low and High Stressing Frequencies.

Finite Element Modeling of Electric Field Distribution in a Defective XLPE Cable Insulation Under Different Magnitudes of Stressing Voltage (2024)
Presentation / Conference Contribution
Sulaiman, S. H., Rohani, M. N. K. H., Abdulkarim, A., Abubakar, A. S., Shehu, G. S., Musa, U., Mas'ud, A. A., Rosle, N., & Muhammad-Sukki, F. (2023, August). Finite Element Modeling of Electric Field Distribution in a Defective XLPE Cable Insulation Under Different Magnitudes of Stressing Voltage. Presented at The 12th International Conference on Robotics, Vision, Signal Processing, and Power Applications, Penang, Malaysia

Air voids in solid dielectrics affect the performance and lifespan of high voltage (HV) equipment. In this research, electric field distribution within a cross-linked polyethylene (XLPE) HV cable is analyzed using a finite element analysis (FEA) soft... Read More about Finite Element Modeling of Electric Field Distribution in a Defective XLPE Cable Insulation Under Different Magnitudes of Stressing Voltage.

Simulation of a Solar Dryer for Use in Developing Countries (2023)
Presentation / Conference Contribution
Muhammad-Sukki, F., Abiola Oladimeji, A., Sola, P. J., See, C. H., Bani, N. A., Muhtazaruddin, M. N., Amran, M. E., & Ahmad Kamil, A. S. (2023, October). Simulation of a Solar Dryer for Use in Developing Countries. Presented at 2023 International Conference on Power and Renewable Energy Engineering, Tokyo, Japan

This paper examines the implementation of solar dryers in developing countries. Simulations were carried out using a simple model of a solar dryer to validate the drying process for various crops and fish products. The solar dryer simulator model in... Read More about Simulation of a Solar Dryer for Use in Developing Countries.

Design and Development of Remote Monitoring Predictive Maintenance Dashboard for Reverse Osmosis Water Purification Plant (2023)
Presentation / Conference Contribution
Bani, N. A., Amran, M. E., Noordin, M. K., Kasri, N. F., Hidayat, A. A., Muhtazaruddin, M. N., Ahmad Kamil, A. S., & Muhammad-Sukki, F. (2023, September). Design and Development of Remote Monitoring Predictive Maintenance Dashboard for Reverse Osmosis Water Purification Plant. Presented at 2nd IEEE National Biomedical Engineering Conference (NBEC 2023), Melaka, Malaysia

In an effort to digitalize and modernize medical equipment maintenance services in Government Hospitals, remote monitoring dashboard has become indispensable. Monitoring dashboards are often used to monitor, control, improve and maintain the operatio... Read More about Design and Development of Remote Monitoring Predictive Maintenance Dashboard for Reverse Osmosis Water Purification Plant.

Cruise revenue management: An integrated RM Framework (2023)
Presentation / Conference Contribution
Chu, A., & Hsu, C. (2023, December). Cruise revenue management: An integrated RM Framework. Paper presented at 2023 RevME Conference, Hendersonville, US

A holistic approach to understand cruise revenue management (RM) practices that cover ticket and onboard revenues, through a cross-disciplinary literature review and practitioner interviews. An integrated cruise RM framework was developed and served... Read More about Cruise revenue management: An integrated RM Framework.

8th International Electric Vehicle Conference (EVC 2023) (2023)
Presentation / Conference Contribution
(2023, June). 8th International Electric Vehicle Conference (EVC 2023). Presented at 8th International Electric Vehicle Conference (EVC 2023), Edinburgh

Building Integrated Photovoltaics Design Optimisation through Customised Top Contact – An Advertising Opportunity? (2023)
Presentation / Conference Contribution
Amo Awuku, S., Bennadji, A., Muhammad Sukki, F., Prabhu, R., & Sellami, N. (2023, November). Building Integrated Photovoltaics Design Optimisation through Customised Top Contact – An Advertising Opportunity?. Presented at 4th Virtual International Conference Raman Optronics Webinar Series (ROWS) 2023, Online

Building Integrated Photovoltaics (BIPV) refers to the use of Solar Photovoltaics to replace conventional building materials such that they form part of the building envelope after construction. They are typically used to replace roofing sheets, wind... Read More about Building Integrated Photovoltaics Design Optimisation through Customised Top Contact – An Advertising Opportunity?.

Non-Linear Model Predictive Speed Control of Six Phase Squirrel Cage Generator in Wind Energy System (2023)
Presentation / Conference Contribution
Abdulwahab, I., Musa, U., Sarip, S., Mas'ud, A. A., Muhammad-Sukki, F., Faskari, S. A., & Mahmud, A. T. (2023, August). Non-Linear Model Predictive Speed Control of Six Phase Squirrel Cage Generator in Wind Energy System. Presented at 2023 IEEE 6th International Conference on Electrical, Electronics, and System Engineering (ICEESE), Kuala Lumpur, Malaysia

Due to the intermittent nature of wind, varying wind speed causes imbalance in the current of the six phase squirrel cage induction generator (SCIG). These changes in the input signal create inbalance in the current and therefore causes deviations in... Read More about Non-Linear Model Predictive Speed Control of Six Phase Squirrel Cage Generator in Wind Energy System.

Effect of COVID-19 on Photovoltaic Demand and Installation (2023)
Presentation / Conference Contribution
Zulfiqar, F., Muhammad-Sukki, F., Hawa Abu-Bakar, S., Bani, N. A., & Mas'ud, A. A. (2023, July). Effect of COVID-19 on Photovoltaic Demand and Installation. Presented at International Conference on Green Energy, Computing and Intelligent Technology (GEn-CITy 2023), Iskandar Puteri, Malaysia; online

The research investigates the effects of the COVID-19 pandemic on the photovoltaic (PV) sector. This research examines the alterations in PV demand and installation amidst the COVID-19 pandemic and identifies the underlying factors that have influenc... Read More about Effect of COVID-19 on Photovoltaic Demand and Installation.

The humanitarian supply network: A paradigm problem and a big idea (2023)
Presentation / Conference Contribution
Duddy, D., Stantchev, D., & Weaver, M. (2023, September). The humanitarian supply network: A paradigm problem and a big idea. Paper presented at Logistics Research Network (LRN) Conference 2023, Heriot-Watt University, Edinburgh, Scotland

This research examines whether greater effectiveness and efficiency in humanitarian supply chains can be achieved by adopting a cybernetic approach to information flow. It looks at how, by taking a holistic view of humanitarian supply operations, the... Read More about The humanitarian supply network: A paradigm problem and a big idea.

Full turbine modelling of the NREL 15MW reference wind turbine for the transient thermal and structural analyses of the direct -drive generator structure (2023)
Presentation / Conference Contribution
Bichan, M., Jaen-Sola, P., Sellami, N., & Muhammad Sukki, F. (2023, August). Full turbine modelling of the NREL 15MW reference wind turbine for the transient thermal and structural analyses of the direct -drive generator structure. Presented at SCEBE Research Degree Conference 2023, Edinburgh Napier University, Edinburgh

Modeling and Simulation of Heterojunction Solar Cell; Determination of Optimal Values (2023)
Presentation / Conference Contribution
Lawal, S. M., Fough, N., Sellami, N., & Muhammad-Sukki, F. (2023, June). Modeling and Simulation of Heterojunction Solar Cell; Determination of Optimal Values. Presented at 2023 21st IEEE Interregional NEWCAS Conference (NEWCAS), Edinburgh, United Kingdom

A heterojunction solar cell of ZnSe/ZnO/CIGS/Si structure has been simulated in order to determine the optimal values. The performed modeling and Simulation is used to get an idea and identify the optimal values that can be use in the manufacturing p... Read More about Modeling and Simulation of Heterojunction Solar Cell; Determination of Optimal Values.

The Applicability of Autopoietic Cybernetics in Humanitarian Supply Chain Thinking (2022)
Presentation / Conference Contribution
Duddy, D., Weaver, M., & Stantchev, D. (2022, September). The Applicability of Autopoietic Cybernetics in Humanitarian Supply Chain Thinking. Presented at Logistics Research Network Conference, Supply Chain Innovation: People, Process, Technology, Birmingham, UK

Purpose: This research examines whether an autopoietic cybernetic model can assist in achieving greater
effectiveness and efficiency in the humanitarian supply chain paradigm. It examines the extent to which a holistic view
is taken during humani... Read More about The Applicability of Autopoietic Cybernetics in Humanitarian Supply Chain Thinking.