Outputs (572)

A Decentralized Batch-Based Group Key Management Protocol for Mobile Internet of Things (DBGK) (2015)
Presentation / Conference Contribution
Abdmeziem, M. R., Tandjaoui, D., & Romdhani, I. (2015, October). A Decentralized Batch-Based Group Key Management Protocol for Mobile Internet of Things (DBGK). Presented at 2015 IEEE International Conference on Computer and Information Technology; Ubiquitous Computing and Communications; Dependable, Autonomic and Secure Computing; Pervasive Intelligence and Computing

It is anticipated that constrained devices in the Internet of Things (IoT) will often operate in groups to achieve collective monitoring or management tasks. For sensitive and mission-critical sensing tasks, securing multicast applications is therefo... Read More about A Decentralized Batch-Based Group Key Management Protocol for Mobile Internet of Things (DBGK).

Personalization and street-level practice in activation: the case of the UK's work programme. (2015)
Journal Article
Fuertes, V., & Lindsay, C. (2016). Personalization and street-level practice in activation: the case of the UK's work programme. Public Administration, 94(2), 526-541. https://doi.org/10.1111/padm.12234

This article discusses factors shaping street-level caseworkers' role in the ‘personalization’ of activation for people with employability and health-related barriers to work. Rice's (2013) micro-institutionalist framework understands street-level bu... Read More about Personalization and street-level practice in activation: the case of the UK's work programme..

Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids (2015)
Presentation / Conference Contribution
Shyha, I., Gariani, S., & Bhatti, M. (2015, July). Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids. Presented at Manufacturing Engineering Society International Conference, MESIC 2015, Barcelona, Spain

Power consumed in metal cutting is typically converted into heat near the cutting tool edge. Cutting fluids are then provided to a cutting zone in order to improve the tribological characteristics of machining processes and to dissipate the generated... Read More about Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids.

Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam (2015)
Presentation / Conference Contribution
Oppon, C., Hackney, P., Shyha, I., & Birkett, M. (2015, July). Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam. Presented at Manufacturing Engineering Society International Conference (MESIC 2015), Barcelona, Spain

The continuous growth of the usage of Polyurethane foams requires that designers and manufacturers investigate the appropriate factors that affect their production and full usage in order to exploit their full potential. This research reports the eff... Read More about Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam.

Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity (2015)
Presentation / Conference Contribution
Kahwash, F., Shyha, I., & Maheri, A. (2015, July). Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity. Presented at Manufacturing Engineering Society International Conference, MESIC 2015, Barcelona, Spain

The need for high quality machining of composite materials is rising due to the increased utilisation of these materials across several applications. This paper presents experimental findings of orthogonal cutting of unidirectional glass fibre reinfo... Read More about Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity.

Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products (2015)
Presentation / Conference Contribution
Bade, L., Hackney, P., Shyha, I., & Birkett, M. (2015, July). Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products. Presented at The Manufacturing Engineering Society International Conference, MESIC 2015, Barcelona, Spain

The advancements in manufacturing technology over recent years have made Additive Manufacturing, a breakthrough technology in the designing and manufacturing field. This paper discusses the possible applications of Additive Manufacturing (AM) techniq... Read More about Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products.

Thickness dependence on structural, dielectric and AC conduction studies of vacuum evaporated Sr doped BaTiO3 thin films (2015)
Journal Article
Raja, S., Bellan, C. S., Sundaram, S., subramani, G., & Rajamani, R. (2016). Thickness dependence on structural, dielectric and AC conduction studies of vacuum evaporated Sr doped BaTiO3 thin films. Optik, 127(6), 3200-3205. https://doi.org/10.1016/j.ijleo.2015.12.072

Barium titanate (BaTiO3) doped with Strontium (BST) nanoparticles prepared by using wet chemical method were thermally evaporated on to well cleaned glass substrates under the vacuum of 2 × 10−5 Torr, using 12A4 Hind Hivac coating unit. The thickness... Read More about Thickness dependence on structural, dielectric and AC conduction studies of vacuum evaporated Sr doped BaTiO3 thin films.

Extensional rheometry of cellulose ether solutions: flow instability (2015)
Journal Article
Vadodaria, S. S., & English, R. J. (2015). Extensional rheometry of cellulose ether solutions: flow instability. Cellulose, 23(1), 339-355. https://doi.org/10.1007/s10570-015-0838-1

Capillary breakup extensional rheometry
of semi-dilute hydroxyethyl cellulose (HEC) solutions
was performed under several step-stretch conditions.
The resulting parameters, i.e. terminal steady state
extensional viscosity (gE) and the timescale f... Read More about Extensional rheometry of cellulose ether solutions: flow instability.

Reliability of manual assessments in determining the types of vegetation on railway tracks (2015)
Presentation / Conference Contribution
Nyberg, R. G., Yella, S., Gupta, N. K., & Dougherty, M. (2015, November). Reliability of manual assessments in determining the types of vegetation on railway tracks. Presented at Web Information Systems Engineering – WISE 2015, Miami, FL, USA

Current day vegetation assessments within railway maintenance are (to a large extent) carried out manually. This study has investigated the reliability of such manual assessments by taking three non-domain experts into account. Thirty-five track imag... Read More about Reliability of manual assessments in determining the types of vegetation on railway tracks.

Inter-rater reliability in determining the types of vegetation on railway trackbeds (2015)
Presentation / Conference Contribution
Nyberg, R. G., Yella, S., Gupta, N. K., & Dougherty, M. (2015, November). Inter-rater reliability in determining the types of vegetation on railway trackbeds. Presented at International Conference on Web Information Systems Engineering, Springer International Publishing

Vegetation growing on railway trackbeds and embankments can present several potential problems. Consequently, such vegetation is controlled through various maintenance procedures. In order to investigate the extent of maintenance needed, one of the f... Read More about Inter-rater reliability in determining the types of vegetation on railway trackbeds.